Wildlife Gear - Carrying with Slings, Straps and the QD System
ฝัง
- เผยแพร่เมื่อ 13 มิ.ย. 2024
- WIlilfe and Bird Photographers all have their preferred method of carrying their gear. In this video, I look at a system I really like and will convert to; the QD system. I look at 3 straps from Blackrapid, Peak Design, and Kirk/Magpul.
All products in this video are below.
Please support the channel by using these no-fee affiliate links below:
Peak Design Slide strap: bhpho.to/42SKquO
Blackrapid Breath strap with standard connection: bhpho.to/3K2vZvl
Blackrapid with QD: bhpho.to/3TWYDTs
Magpul MS4 strap: bhpho.to/3G2ALIo
I do NOT recommend cheaper versions, consider proven companies like Magpul, Kirk, RRS, Promedia Gear
Kirk QD swivel ($33.00): bhpho.to/42Q4VZb
RRS QD swivel ($14.50):bhpho.to/3Kn5NwS
Long lens plate with QD socket: promediagear.com/collections/...
![[MPD직캠] 베이비몬스터 직캠 8K 'LIKE THAT' (BABYMONSTER FanCam) | @MCOUNTDOWN_2024.6.13](http://i.ytimg.com/vi/8qa-nm9bCLs/mqdefault.jpg)
Great video! Never heard of the QD system until now so this was very helpful. The only thing I would point out is that having two points of connection does not necessarily offer redundancy. If either of the connectors fails or was not properly secured when both connectors are on the same strap, then your gear is going to hit the ground. The only way to get redundancy with two connectors is if each is on it's own strap slung around your shoulder. But your point of having two connectors for a wider strap distribution and preventing camera swing is well taken. I can see how just one can get a little too wild if you had to hike hands free. Thanks for the video and will definitely look into the QD system.
I finally found the strap that is the most comfortable to use. Imagine my surprise when I finally realized it's the Canon provided strap for my 500F4 that I just ignored and had laying there wrapped in plastic inside the lens case. I had bought a Peak Design strap that never truly felt comfortable and I had another one that wasn't really doing it. Then I finally brought out the strap provided from Canon and I realized it was padded and wider. I thought "huh...never realized it was padded" So I attached it to the lens and tried it on and it was like a dream "wtf is this? it's almost like it's made for the le...ahhhh because it's developed particularly for this lens, for the size and weight. Canon put some thought into it, and why wouldn't they? It's a very expensive lens. It wasn't just a stock strap that they tossed in with the lens. It's made to handle the weight and not to dig into your shoulders. It's fantastic. Now, granted. It doesn't have the quick release shown here in the video. It uses the straps that goes into the fastening points on the lens. So it'll be attached to the lens all the time. But, I'm gonna take a look and see if there is some QR system that can be used with the Canon strap because honestly, nothing beats the padding on that strap.
Always great to cover areas that most people don't think of until something happens
Nice overview of each. The black rapid is nice, I also like the peak design set up. Thanks for sharing
I switched to MagPul QD system a couple of years ago and love it. Way easier than other systems in my opinion. I only use the one connector but I have added a OP/Tech strap to all my camera and lens plates and my strap and use that as a secondary safety connector. Takes an extra second to connect/disconnect but it's worth it in my eyes. If QD were to fail OP/Tech strap would prevent the gear from falling to ground. Fortunately I have never had it fail on me.
I think its smart to have an easy safety in place like that
Great video. I use the Black Rapid and never heard of the QD system. I will definitely have to look into it. Thanks for sharing!
The exact video I was looking for, thank you!
Leofoto has a great QD strap too, and QD accessories.
This really solves a problem for me, I was using a really right stuff bracket attached to my Black Rapid strap but unscrewing it when I needed to get a shot was a pain. Sometimes missed a shot, this will hopefully work much better
Thanks for the video. I’ve been using QD for about three years now and have used Magpul, adapted Black Rapid, native Black Rapid, and Peak Design but without QD. Thanks to your video that’s about to change since I can now use Peak Design either and without QD. Black Rapid also makes a safety leash that gives you a second point of connection. I’ve used that as well. Also will see if I can find a lens foot with two QD sockets. Have not seen that on any L- brackets or base plates but will look around. Also Small Rig now does base plates, L-brackets, and cages with QD.
Great video, I’ve been using QD connectors for years to carry my camera gear, makes it really easy to disconnect and mount the camera on a tripod. I use the Holdfast Gear Moneymaker when carrying two or more cameras and their Solo strap when carrying one camera I just connect their shackle to the QD connector, the Holdfast straps also have a safety tether to connect to the camera. BTW Leofoto make a couple of QD straps that are really well made in fact their SP-01 looks exactly like the Magpul strap but I like Leofoto one better and it costs less. I use the Leofoto straps to carry my tripods. The straps connect to the tripod with QD clamps Leofoto makes for the tripod legs. I’ve never had a QD port failure in all the years I’ve used them.
I saw the Leofoto option but did not include it. I have NO issue with any of the products I have seen from them, BUT someone said they had one and the connector failed quickly, so I was reluctant to share them out.
QD is the way to go for all types of "shooting". pew pew or click click. ...Also with 1 or 2 points, if one breaks the gear is more than likely falling unless you have lightning reflexes.
A thorough review, Scott, well done. I've been using QD system with the Peak Design strap for about six months. I'm not going back. A large benefit for me is I can now quickly release my lens plate from the strap so I can, hopefully, quickly mount the lens on my tripod before a bird takes off.
Good to know !!!
Love the QD system. I use blackrapid and a single RRS QD and have replaced the feet on my long lenses to include QD connectors. I've got a smallrig l-bracket for my Z8 that has qd connector so I can use it on the body for smaller lenses. When I want the lightest strap, I've also got peak design connectors on the camera lugs / l-bracket and use the pd leash, or wrist strap. I do want a safety tether setup, though. Two points of contact and a tether is surely the way to go with heavy lenses...
Thanks for all of your useful videos and this is perfect timing as I just converted my BR straps (switched Sunwayfoto clamps to RRS/Kirk QD plugs) to save weight/Int’l packing space. For me , the QDs are hard to remove, especially when wearing gloves, so I use a coin size Craftsman screwdriver tool. On my Canon 500mm II, I swapped from 4th Generation Designs to the super comfy ProMedia Gear QD foot (a splurge instead of just adding a QD plate to keep things streamlined). I use OpTech connectors (lenses:cameras) and just added Foto&Tech safety tethers to the BR straps). It was like a big puzzle.
It's always fun customizing your gear to get it just right!
I'm more of a landscape photographer but your channel popped up on my feed. I have to say your video was the most organized and well presented than most that I see. You don't shout or modulate your voice for the camera, your presentation (pic in pic and script) follow logically smoothly. Kudos.
Regarding the straps, how about making them yourself. Outdoor supply companies (like dutchwaregear, strapworks) sell webbing of different sizes and buckles so for under $10 or $15, you can make the webing of your disired width, length, and buckle location.
I think if you can assure that he stitches are secure, its a great idea. I bought a lens from a guy and he left a homemade strap inside. Guessing it cost under 20 and was as secure as any of the others.
Sorry for my mediocre english. Some of the BlackRapid-Straps (old RS-4) can be opened completely. So you can add a second connector (two QDs, two carabiners or two stainless-steel-D-Rings as sliders for carabiners). If you have the old Sports (red R), you can break the plastic part (C) at the end, which attaches the end of the strap to the main strap. Then you can open it like the RS-4.
Or you can use bigger aluminum-carabiners which are not rounded but straight at one end (so that they can slide along the strap). So you don´t have to open the strap.
Great video..Thanks for shearing
Your videos are always so well done and informative - great demo of these systems. Just got the Z8 with 180-600 lens. Looking for a strap that will work for me. I replaced the lens foot it came with to the Kirk Lens Collar for Nikon Z 180-600mm f/5.6-6.3 VR Lens (this is the only 3rd party lens collar w/arca foot they make for the Z8 that I know of). The downside of this is that it does not have 2 slots around the collar (like the original collar it came with did) and I was thinking of going back to the original collar and finding a system to work where I could use a strap to "thread" through those existing openings with. Sorry if I'm not explaining that very well, but if you look at this lens you will see what I am talking about! Thanks again for all your information explaining everything! :-).
I now have a few plates from ProMediaGear with the QD socket and using with a Leofoto SP-01 QD Strap. Really liking it!
super!
Very helpful video! Thank you!!
Glad it was helpful!
Great video Scott! I've got a Fuji XT4 and XF 50-140mm which is a heavy lens given the focal range. Was looking for a way to mount to the lens collar and I think the PD two point method would work good. PS regarding the Blackrapid single point of failure, there are some copycat versions on Amazon which have a security strap to attach to the camera/cage, which give you some assurance if the main strap fails.
I use the Peak Design system for my 800pf lens, I use their mounting plate and attach it to the lens foot (not factory) on the up side or inside, so i have the plate on there with the quick attachments and if i want to mount it to my Gimbal i can and not have them buttons get in the way.. No matter what you do this lens attached to the Z9 is going to get taxing because of the weight, But its the best way i have found to mount it and have the best of both worlds as needed
Thank you for the information, Scott!!.
You bet!
I use the Kirk one on my Rose Anvil strap and it's amazing. Kirk foot on my Sony 200-600
Rose Anvil! Addicted to the Boot cutting vids lol
Thanks for this video, very helpful.
I had a BlackRapid sling, and that was ideal until I bought my R3 and 100-500mm with 1.4x. Suddenly that swinging with the single anchor point was a big issue.
I already had a Peak Design Cuff and liked it, so with your advice I’ve gone further into the PD product line ☺️
Cheers 🍻
Very nice!
Any sling for rifles would work with the qd system, they make padded ones and also ones that can tighten and loosen quickly. Also having two points of connection spread out will make it work better if you tighen it up which is better for carrying imo. You can also add a 2 to 1 point tri-glide so any sling can go from two point to one point as-well as I find one point better for shooting!
Good stuff! I've grown attached (pun intended) to the Spider Holster system, so the weight is on my hips. My heaviest is the D4S with the 500PF. Cheers!
I like spider but ditched them for PMG holster. I just like the company better. Had a bad experience with spider. I use that for 70-200 or macro. Seems like my long lenses are too heavy. But if it works for you that's great ! I won't comment that your hips must be much bigger. Lol
with the black rapid strap. turn it around so it rests against your hip in the front of you instead of hanging behind you. that works for me anyway
I use Peakdesign only. For all my lenses and body R6. Great video!
Thanks for sharing!
I use the Blackrapid strap with an arca clamp attached to the carabiner which I use to clamp onto my camera's L plate or lens feet. I use RRS plates and feet which are arca swiss compatible for that clamp for strap carry and tripod mounting. And they also come with a QD connector. Magpul also makes a standalone QD swivel sling adapter which I have looped through the strap of a sling (PD V1 10L), which I occasionally use to carry the camera. Having QD and arca swiss compatible plate and feet lets me use additional clamps or the QD as additional safety tethering points.
I like the QD foot with the arca option as well! Leofoto makes a QD to arca clamp adapter which i keep on hand in case someone I am with needs a strap and doesn't have QD (or Im using another lens without QD)
Excellent video, since I switched to the Z9 I hardly use flash, so I don't use the tripod either and I couldn't find a solution to carry my camera during bird walks. Thanks for the tips.
Glad it helped!
I want to try so making a wide leather strap similar to the holdfast Money Maker solo, and with the second attachment point accessory
Thanks!
Thanks so much Dan!
I use the Peak Design Slide but just with it's connectors - one on the tripod foot and one on the side of the camera.
The the one on the tripod foot hinder you from mounting it on a gimbal?
@@WildlifeInspired I use a Peak design anchor (the metal piece with two strap eyelets that screws into a 1/4") on the top of my lens foot and then attach the red PD anchors to that. This way, the strap is above the arca swiss instead of getting in the way below it.
I use the peak design and QD system in a different configuration with my long lenses. I have the peak design buttons on the lens but I also have a single qd on the lens foot. Then, the qd is connected to the peak design strap buckles with a nylon strap on both sides, creating a dual safety harness system. One of the reasons I did this is that I do not like the fact that the lens/camera hanging across my body. My system makes the lens hang parallel to my body while I hike. You actually sometimes cannot see that I'm carrying my gear since I can tuck it behind my arms while hiking, preventing excessive movement and swinging. I pm'd you some pics on fB of the set-up.
Got the message thanks!
This was SO useful, it answered many of my questions. Thank-you for making this!! The only thing that was confusing was how you modified the black rapid to be QD compatible. You said you just "took off my old clip...". I'm not sure which clip you were referring to, and what you took it off from, and what that has to do with the Black Rapid strap. Maybe I need to go back to the beginning and understand about your "old clip"...
My old clip was an arca swiss compatible clamp that I used to connect to my lens foot. I removed that and now i just "plug" in the QD (actually 2 QD connections as my foot has 2 QD ports)
Hi Scott, interesting to see the QD connectors. I was also skeptical, but they do look more robust than I thought. My own solution is a home sewn harness using 2 inch military webbing. Using the same format as the "moneymaker" harness, its crossed between my shoulder blades and provides a loop each side, so I can carry 2 cameras and shoot with either, sling style. I use a stainless steel D ring on each side for the slide and stainless caribinas like the one you showed, to hang the cameras. I use a black rapid screw for camera bodies and half inch nylon webbing tied through the lens strap mounts on my super telephotos. Spreads the weight better than a single strap and no way that the webbing or steel parts will fail.
Loving your videos. I'm working my way through your catalogue.
Clive
Thanks so much Clive.
I also have just had a QD failure. Mine was a black Rapid Sport X QD (which is now discontinued!!!) and a Kirk LP-70 on the Nikon 600 Z PF and a Z8 They fell on a hard track and not sure there is damage except the lens hood needed replacing. I tried the system again this time with a safety strap (black rapid) and the system failed again. Not sure why there was a failure. I had been using it fine for 2 years before this.
Really enjoy your videos. Came back to this one since the QD connector on my Luma Lab strap just failed. The little detent balls in the pint no longer engage in the socket. Fortunately, this failed as I was trying to attach the strap, not while I was carrying the camera. I much prefer a sling strap with this connection but now I'm a little nervous. Have you heard of any other failures like this?
Ken
i heard of one. I think manufacturer is important and maybe a tether if moving a lot.
A combination of the Black Rapid 'complete loop' and the Peak Design system would be good. Despite having a two-point connection for stability, if only one of your four points of connection on the PD fails, your gear is on the floor. They need some means of connecting the two end buckles on each end of the Slide together (maybe a QD socket on each one?), so you still have a two-point connection to your gear, but if one of either the cords or QDs fails, the strap won't slip off.
I'll suggest and woud love to see Peak make a safetly clip. It would be two clips that are connected to each other on the top (tethered) and also have the small loop at the bottom like they currently have basically a set of clips connected together. If one fails the system is still in tact.
@@WildlifeInspired Yes; anything to tie the system into a loop that can't be broken by one connector failing.
hi, my Nikon 500mm f/4 ed has connections on the lens barrel; can I hood a strap to them? I'm new to the larger telephoto gig. Thanks for all of your videos; I've learned a lot. Thanks
Dear Scott - Wonderful informative video as usual . I have learnt so much from your videos - Kudos . At the end you had mentioned of a leofoto area clamp with a QD connect - can you give a link for that also - could not really find it in B&H - Thanks - Venkat from Dubai
Very welcome !!
Great video Scott! I’ve used Magpul QD straps for years without issue. I’ve now incorporated small climbing rope wrist straps with Magpul QD connections when hand holding for extra security. I recently stumbled upon Peak Design Capture (backpack strap mount) and am trying to figure out how to use that mount with a Magpul (or similar) QD mount. I’ve gone as far as designing a .STL file and 3D printing it. Works great but don’t trust the plastic material. Would love to have it made out of metal. Not sure if you’ve stumbled upon a similar design? Was using RRS QD base plate for my Canon R6.
the hand strap is interesting, I'll check out the backpack strap
Great video Scott. Did I miss it? Did you mention who makes the lens foot with 2 QD sockets?
Hejnar
I'm already using QD but was still a very good video to watch. I purchased a blackrapid strap that came as QD. I love the setup, the swinging isn't a big problem to me as I always lightly hold onto my lens, partly because I don't 100% trust the 1 connection. If i'm on soft ground I will let go of my camera and i've never had the QD fail.
Once I had my thumb resting on the bar of the QD and when my lens swinged it pushed my thumb into the button and disconnected the camera, I was quick enough to catch the camera since I felt my thumb press the button!
Thanks for the feedback!
Hi Scot thanks for the video, it’s always interesting to see how fellow wildlife shooters carry big lenses I presume you have already tried just using the peak design thicker strap and connecting the peak design toggles direct to the lens eyelets rather than the lens foot and have the foot facing upwards on the Lens then it frees up the foot if you want to quickly mount it on a tripod or grab with the hand without removing the strap?That’s the way I carry my Fuji XH2s+ 200mm F2 with the camera and Lens facing downwards towards the ground on my hip area, although it is a lighter set up than your Nikon Z9 + 600mm of course so it might not sit on your hip so well with the longer lens facing downwards🤔
yes, I also wanted to show an option with plates as many lenses do not include that lens mount options.
Oh Anthony, thoughtful comment bro
I am sorry to say but if one of the QD connectors fails in either of your two-connection systems your heavy 400mm lens will be on the ground--that strap will whip around as it falls much faster than you can catch it. So to me there is no security at all from these two connector systems you describe where the connections are at the ends of a strap--essentially no safer than a single point. What I do to carry my 800mm is to add a safety leash to my BlackRapid strap which is connected to the second QD port on my lens foot. That way if either QD fails the lens is going nowhere.
My safety (I didn't show) is to attach a strap to the 2 qd connectors so if one fails the strap should hold. Not sure if that description. Helps.
@@WildlifeInspired I can’t exactly picture what you are saying but I’ll take your word for it that it works!
Would the lens be more stable when hanging, if you used two sliders on the black rapid strap, using both qd's. Giving you the back up of the second connection that the peak can't.
@@WildlifeInspired your videos are great! Could you show a pic of the strap you use between 2 qd connectors with brand info pls
I've used them all now I use optek i like the added security ...I dont know why peak doesn't have a safety tether on their stuff one connection is no different than two
Very interesting video. I like your style regarding gear reviews, especially that you point out the pros and cons unbiased.
I never strapped a PD anchor onto my big lens (or any strap to be honest), so my question might be silly. Why don't you just attach the anchors onto the strap mount of the lens? Though the QD system seems quite easy to use, as you rightfully pointed out the weakest point would determine the durability of a chain of systems, so a single PD nylon anchor will be still at least as failsafe as a QD attached onto a PD anchor.
(The heaviest setup I use in wildlife is a EF 600/4 IS II lens adapted to my R5)
I will play with both styles of mount, but I also carry a 70-200 which doesnt' have the lens mount option and I wanted to show this to people that might be using telezooms that don't have the lens mount option.
@@WildlifeInspired Thank you for your answer. Now it is clear.
Hi Scioto luse that type of system from promedia gear. Love can your system with it? Love all of your this . Mike Fisher FT Myres Fl
Great video. Thanks. Looking for something like this because I get tired off taking off the strap when I want to mount it on a mono/tripod. I have a question, can you by accident release de QD connection, by for example pressing on it with something, when it gets stuck between something? If so how would you make an extra safety connection to prevent that?
Its very difficult to release a QD connector (buy a reputable brand) you can also try a tether of some sort but that would be a do it yourself.
Fyi the blackrapid strap with QD shows as discontinued. I have the BR strap and have the same issues with it bouncing and like you my hand is on it. Will try the peakdesign strap to see if i like it.
Im liking the Peak after a full month now
Scott, is there a system that will help you prop a 300-400mm f2.8 lens against your chest for stability when handholding?
Great Video, and a lot of great comments in here! I like RRS baseplates, but I wonder why some , ( like my D500 ) have the QD socket in the plate, but others dont ? Peak Design straps are really good, and thanks for the idea of adapting them Scott. I will have to try that! I use the PD Capture clip and Pro pad system for smaller rigs, and it works the treat for walking around, with the the camera on my side.
These videos are real winners!!!! BIG Thumbs up! Very informative! Stay safe and Happy Shooting!
Thanks so much!
Great video , thank you for sharing!!!
What do you think is the best foot replacement for the nikor 400 2.8 tc? For good balance on gimbal , and convenience of carrying
Thanks
Hejnar makes a low profile foot with 2 QD ports. Also get a foot that is swept back because the balance point can be further back on the Z9 especially as lens get lighter .
Try the Promediagear civilian QD version. Same quality, same solidity but less military look.
feel free to link me, I dont see it anywhere
Scott, where did you get the Hejnar foot replacement?
Check email
I just converted (hacked) my 3 year old PD slide light to QD system. I accidentally found that Smallrig baseplates have QD socket! Additionally, I added a safety tether with a PD clip & anchor. I wondered why you didn’t…
I am working on a tether as well. feel free to email me pics of your tether skeysimages@gmail.com
What plate is that with the 2 qd ports? I just bought the single, but would rather have that 2 port.
Hejnar I think. Shoot me an email if thats not what you are looking for
I prefer the 2 points attachment… one on the body and one on the lens (peak design)… so the lens is always pointed down and close to the body…
Ill try that set up!
I love the QD-system! I also used to have Black Rapid for all my cameras and lenses with foot ... Then I moved to Peak Design's system ... but found that I didn't liked it for the heavy lenses. By a coincidence I found the QD-system when I looked for a new tripod foot for a new lens. I did not know about the military background until I made a story (article for a Swedish magazine) about the combat photographers for the Swedish armed forces. One of the photographers (those photographers are real soldiers+photographers) looked at my camera straps and was really impressed. And told me he had never seen it on a camera before, but a lot of times on heavy guns. :)
Edit:
(The strap I bought was the MagPul from Kirks ...)
Edit 2:
(The Peak Design is my daily go, when not carrying heavy lenses ...)
Thanks Scott for this very constructive video. Personaly I use PeakDesign quick-connectors directly connected on the two attachements located on the lens tripod ring. Shooting Canon, I've installed PeakDesign Anchors on the Canon's straps which are very well padded. Then when I want to install the lens on a monopod or tripod, the foot is clear of any obstacle and the lens is still secured when fixing it to the pod. Have you already tested such a setup? and how does it feel compared to the ones you presented?
Ill try hiking with it set up both ways and let you know.
whats the eye piece your using on your Z? which covers that little bit to the right where the sun pops across?
Yes, the standard eyepiece tends to fall off (disappointing), I replace it with one that is more of an eyecup.
If you only have one connector spot on the lens foot plate and so you need to connect the other end of the strap to the camera body, does that cause damage in any way to the body? I have been told never to connect a strap to the camera body, but rather, only to the lens foot. (Sorry in advance if my terminology is inaccurate but I hope you can tell what I mean, lol.)
You never connect 1 point to the camera body alone. With heavier lenses, I would avoid using the body as a second d point but with lighter set ups Inthink you would be okay
The link to the Black Rapid with QD connector says no longer available (B&H). If you have another link, I'll try that one, or maybe a link to the WIDER Peak Design strap. Thanks. UPDATE, I’ve decided to go with the wider Peak Design method.
maybe this
bhpho.to/3OKr9ql
bhpho.to/3OL5yhu
First, thank you so much for sharing. This has been a tremendous help as well as a time and money saver. Question: your pro media plate has two points to plug I your qd. The PX6QD looks like it only has one. Is that the wrong part or did you do some magic? Thanks Scott!
They PMG has ONLY ONE. The lens foot that has two is made by HEJNAR!
What brand was the lens plate with two QD sockets?
Hejnar.... I think Promedia Gear is coming out with one soon
I’m still looking for a replacement foot for a Sony 600 f4 lens with 2 QD Ports ?
Try Hejnar
What is the acres swiss clamp you mention the the beginning? Love your stuff!
Leofoto?
tuyệt vời
I have the wider peak strap and it is comfortable, but I think it might be better still if you added a should pad like the black rapid, this could be a pretty straightforwards DIY job. The only issue with the peak is that on my A9 / 200-600, when i carry it, the buckles have rubbed against the corners of the camera peeling away the paintwork...
I had the same problem and I bought just the clips from Peakdesign and attached it to the original strap from Sony. The camera combo is not that heavy and the Sony straps are fine.
Where do I get the hejnar foot like yours i looked at their sight but I don't see one like yours I havd the 600 5.6-6.3 sony
Im not sure what their line up is. Mine is for the nikon lens but I did note that the Nikon 400mm wasnt listed, you had to know that it was the same foot as the 800mm lens. I purchased directly through Hejnar.
@@WildlifeInspired its ok I bought the kirk foot
Who makes the lens foot for that 400mm? Thanks.
Hejnar, but promedia gear is coming out with a foot and I have talked to them about the inclusion of 2 QD ports, will see what they offer in the final version.
@@WildlifeInspired Thanks.
I started with 2 BlackRapid and and now I have all Peak Design. I feel like PD is light years better.
Lots of support for that Peak strap
he never commented how we were walking and I looked at his black rapid and told him to tighten it down, and he dropped his old 4002.8 first thing in the morning hahahah
lol that happened
Too bad you can’t put a safety tether on the peak.
Any other suggestions on the QD plate? the one you linked to is out of stock. 🙃
Ill update the info
@@WildlifeInspired I fount that plate on *a-hem Amazon. However, I also found that the Leophoto replacement foot with QD for my Sony 400 F2.8 was still in stock on their website. I like how the QD attachment on it is further back thus balancing my camera and lens better with a slight downward angle. It's more compact and lighter than adding a plate to the stock foot. Every gram is felt since I hand hold a lot. Thanks for putting us on to this solution!!!
Why make it so complicated? Just use the PeakDesign fixed to the two lens mounting points. Then the lens is pointing down and doesn't rock around.
Keep in mind I'm making a video for a lot of people with different lenses. I don't think the 100-400 200-500 and most telezoom lenses do not have those lens options. Also my 70-200 does not. So certainly if you like the set up you have that's great and if I only used one lens, I could just do as you suggest.
@@WildlifeInspired Yes, I must admit that short tele's don't have them, I think maybe they should, but I'd rather use just a Peak Design on camera or a Thinktank Digital Holster or similar for those lenes than having a camera and lens bouncing around by my side. Lots of commonly used long telezooms and primes do have the mounts including Sony 200-600, all the Sigmas, Olympus 150-400, Canon 200-400, etc, etc. The lens strap mounting points are there for a reason and are the perfect balance point making camera carrying and handling much easier in these days of handholding. Using the tripod foot to mount a strap just makes it unbalanced, hence the camera and lens bounces around bumping into things or bruising your leg. It also puts a strain on your back so can cause issues with long periods in the field because you try to counter it by leaning away from the rig. Give it a try. I bet you won't change back. Best to go with the widest PD strap too with the big lenses.
What about the foot replacement that has two QD mounts??? I’d love to buy that but it’s no where to be found in your list of products. Please help me out. Thanks Scott.
I use one peak design qd on my camera body, right side, and screwed in the tiny peak design mount under my canon 100-400 ii lens foot and have the second peak design qd mounted to that
For the Magpul, you can put the buckles on the back side so they are not rubbing on your shoulder.
For the BR, you can add a safety strap to connect to a second point of contact, usually the tripod socket on the camera or I use the Peak Design Anchor Links to attach a safety strap to the PD anchors.
where did that plate with two QD sockets come from?
Hejnar is my replacement foot plate, and there are a few companies that make the QD plates including Promedia gear
@@WildlifeInspired thanks
Scott, I am carrying my big glasses (tried with both Sony 600mm F4 and 200-600mm lenses) using Peak Design Slide Lite strap. I have connected the Peak Design anchor connectors to the lens's strap holes and attach the strap whenever I have to hike (without monopod or tripod). I am not using any QD system like you have mentioned in this video. It seems to be working very well for me. Do you see any problems with my setup and should I consider using QD systems? Thanks in advance
Lots use your set up. I did want to show an option, but if this set up works for you, enjoy!
I have a canon 600mm f4 mkii, and really right stuff No longer sell the foot, But finely I have come across a second hand one. And going to put this system into how I carry the lense and camera. At present I have a big clamp which is awkward when holding the lens food
Good luck with the new set up
i had a bad experience using the QD, maybe mine was defective, i used the LumaLabs loop QD with the 400mm Z kirk foot and z9 and it fell. Thank god i was on the beach on the sand and it didnt broke. at first i thinked it was my fault but tried again and it get loose again so it wasnt my fault. i have some pictures, i reached them and sent me a new QD Loop and it seems to work fine but im all scared now
You think it was the QD and not the machining of the foot? I will say I have tried to stick with the most reputable brand of QD i could find and have avoided all others. Thinking a quick tether of some sort is a good idea.
@@WildlifeInspired yes, they were compatible, i used the loop since february with the 800 Z and then the 400, and then in august it failed, wasnt my mistake, i think that it needs manteinance or got dirty or i dont know what to think
I also have just had a QD failure. Mine was a black Rapid Sport X QD (which is now discontinued!!!) and a Kirk LP-70 on the Nikon 600 Z PF and a Z8 They fell on a hard track and not sure there is damage except the lens hood needed replacing. I tried the system again this time with a safety strap (black rapid) and the system failed again. Not sure why there was a failure. I had been using it fine for 2 years before this.
I used this system from 2020 till 2022, and then well, turns out that matter if it's made for military, it wears out, if the gun drops it's not a problem, if a lens does... I was walking around Iceland on bird cliffs and my BR QD let go, lens dropped onto the rocks, luckily it was okey but I had to replace the ef-rf adapter and the lens mount in my R5. Turns our BR makes their tiny balls that hold the lens out of aluminium, which wears out (Tested it on 5 different sockets, it was the pins fault). I was obviously pissed, but decided to go the magpull and Kirk way. I'm disappoint to say that neither held up more than 6 months. Those tiny balls that are supposed to hold the pin in the socket always wear out. So in general, absolutely do no recommend it. Your review was great and made the same exact points why I went for them, but I learned the hard way that it's only good on paper. The double QD might be a solution, but I'm not sure if I will give it a shot, it cost me too much already.
Keep up good work Scott!
Thanks G. Interesting that I have not heard many stories like this! Will be curious. I am working on a safety system to see what happens if one does fail.
BR === Blackrapid ? Anyway, I have a Blackrapid strap and the original swivel is deteriorating. It is made from a low quality alloy. Perhaps the BR QD is equally made from low quality material. I don't know. I would trust the original Magpul MAG540 much more. It is also quite expensive. The MAG540 does not fit into a Sunwayfoto sp-60qb plate. I've tried and send that plate back to the seller. There are different sizes of QD thingies availlable and the Mapgpul MAG540 will fit into my Leofoto lensfoot NF-05N. I read stories of different manufacturers that do not fit other manufacturers. So buyer much ask specifically if it accepts the leading Magpul standard (like RRS). My Lensfoot has a steel QD ring - which is good. The QD sling swivel should only mate into a steel socket and not into a soft material like aluminum.
The kirk security strap is better than all of them..
I believe the kirk strap is made but magpul? unless we are talking about 2 different straps
@@WildlifeInspiredgo to b&h search for Kirk security strap. It uses one clamp connection to the lens foot
so you are saying that 2 point is better? but when peak design's 1 point fail, your camera still drop right? how safe can it be?
with 2 points you have the ability to add a tether. There isnt anyting specifically made for it but when hiking long distance, I drop a tether on the 2 connections making it the safest possible set up. (safer then 1 connection)
the gun is way cheaper than camera and lens.
its like having a rifle to shoot the wildlife XD
Good information, but you sound like a teleinfo salesman.
Thanks, not the usual commentary on my approach.