TRX4M DEFENDER SCALEING AND TRAILING CRUISE AT ORENCO WOODS NATURE PARK IN OREGON!

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ต.ค. 2024

ความคิดเห็น • 41

  • @Elisplushies360woodierc
    @Elisplushies360woodierc ปีที่แล้ว +1

    I liked this vid.Nice change from the very slow watching paint dry rock crawl.👍🏼

  • @SevenWelt
    @SevenWelt ปีที่แล้ว +2

    Hello,
    Super cool video Great off road tour!👍
    Greetings Seven🖖

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว +1

      Thank you very much im happy you enjoyed it !! Greetings seven !

    • @SevenWelt
      @SevenWelt ปีที่แล้ว

      @@NWrcadventures 😃

  • @sums369
    @sums369 ปีที่แล้ว +1

    Awesome video!!

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว

      Thanks alot much appreciated thanks for checking it out 👍

  • @bwest6275
    @bwest6275 ปีที่แล้ว +1

    Looking real good! Curious to know, are all the lights including the roof light bar simply plugged into the stock ESC? Or do you have some custom wiring done?

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว

      I went and found a short y style plug for 3 wire type connector and i used one of the two slots on the stock esc to plug so it automatically gave me two more slots plus the one on the esc to make it 3 all u need is a Y style 3 wire plug to make it work the only mods i really did were drill a small hole on the roof of the trx4m defender to run the light bar cables into the connector i also had to trim off the extra tab on the traxxas connector to fit the stock fog lights on to the y cable u also will need to remove the plug head from the cables on the light bar to run the wires through the small hole unless u wanna drill a dime sized hole on your trx4m defender/bronco roof then u wont have to remove it but if u do u will have to remove the plug ends from the plastic connector can be a bit tricky you just gotta find the little lock tabs on the connector and lift em up very carefully without breaking them to slide out the connector ends then simply snap back in after running your cables thru the small hole on the roof other than that it was a simple conversion 👍

  • @backshedrc
    @backshedrc ปีที่แล้ว +1

    I was surprised how much climb ability you had with cargo on your rack. Another great video!

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว +1

      Thanks very much !! Yeah it climbs remarkably well but i do have alot of brass and metal under that body front and rear brass diff covers brass beadlock inner rings brass front steering link steel trans gears they are the stock trail gears but steel and sealed ball bearings in the trans and also steel dif gears and steel driveshafts and and all metal gear steering servo and well the bash guards are also stainless steel its a heavy rig thats why i ended up buying oil filled aluminum shocks for adjustability all the weight on the rack was literally slamming the whole rear en down no suspension whatsoever so the adjustable shocks with heavy 60 weight oil helps balance it all out !

  • @CustomrcOFFROADER
    @CustomrcOFFROADER ปีที่แล้ว +1

  • @RcNickster709
    @RcNickster709 ปีที่แล้ว +1

    Nice run man. This little rig is a good one. :)

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว

      Thanks man much appreciaded im happy u liked it

  • @CustomrcOFFROADER
    @CustomrcOFFROADER ปีที่แล้ว +1

    Subscribed 👍

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว

      Thanks much appreciated custom rc !

  • @steph4050
    @steph4050 ปีที่แล้ว +2

    Nice built! Where did you got all the lugage on the top? I have a defender on the way! Does the spare plastic tire on the back can ve unbolted? Would like to fit a real rc tire. Wit would lok sick 😊

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว +1

      Thanks alot the luggage on top u can find in amazon just search 1/18 scale accessories for trx4m

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว +1

      And yes the spare tire cover can be removed and u can put a real tire in ! There is a screw behind the sticker just peel the sticker and u will have access to the screw behind it

    • @steph4050
      @steph4050 ปีที่แล้ว +1

      @@NWrcadventures Thanks for the reply buddy! Great clips you have here. Good work!

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว

      Thanks man much appreciated brother 👍

  • @Drexfpv03
    @Drexfpv03 ปีที่แล้ว +1

    me randomly finding this video on my feed, seeing orenco woods park, Im like I just Got a TRX4m And I know where that is lol

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว +1

      Awesome your a local and yes its a nice park to trail in i like it there but besides orenco woods theres lots of fun places to trail/scale and crawl

    • @Drexfpv03
      @Drexfpv03 ปีที่แล้ว +1

      @NWrcadventures yea I can see that I just needa find em around here

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว +1

      @@Drexfpv03 u dont need to goo too far to find some good spots to run the TRX4M around their everywhere hehe 👍

  • @Blastfromthepastrc1346
    @Blastfromthepastrc1346 ปีที่แล้ว +1

    Great run with the Trx4m! It sure looks awesome! Btw where did you get the rear mudflaps from? They look really cool and I would definetely want to get a pair for my rig🙂 as always thank you for sharing and have a great sunday my friend 👍

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว +1

      I got em thru meus racing at amazon just write trx4m DEFENDER mud flaps and they should appear right away remember its the meus racing brand and it comes with 4 mud flaps for front and rear i took the front ones out because the larger tire rubbed preety good when i turned with it they work fine with standard 1inch tires but if u get the larger tires then its definitely gonna rub just be aware but other than that with standard tires it should turn fine

  • @elknic
    @elknic ปีที่แล้ว +1

    Does it have an interior in there? Or just a driver dude? Nice build btw :)

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว +1

      No interior i strapped a driver to the chassis frame untill i can actually find an interior which hasnt been eazy 👍

    • @jackpanula9975
      @jackpanula9975 ปีที่แล้ว +1

      ​@NORTHWEST RC ADVENTURES i found them on line 3d printed and they sell the print for like 8 bucks

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว

      Awesome good to know what web site did u find em at ?

    • @jackpanula9975
      @jackpanula9975 ปีที่แล้ว +1

      @NORTHWEST RC ADVENTURES i just looked up "trx4m defender interior." theres some better, some worse looking ones, but they're there

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว +1

      @@jackpanula9975 cool thanks bud ill look into it thanks for the heads up 👍

  • @jasond435
    @jasond435 ปีที่แล้ว +1

    She's moving pretty fast there! Are you running brushless?

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว

      No just stock metal trail gears i swaped the stock plastic trail gears with metal ones and bearings in the trans helped loosen up the trans a bit and i got the metal gears from meus racing thru amazon

  • @AlbertoGarcia-mb9pq
    @AlbertoGarcia-mb9pq ปีที่แล้ว +1

    Hi, I have a doubt. Can you drive slower or does the car always have such abrupt reactions?

    • @NWrcadventures
      @NWrcadventures  ปีที่แล้ว

      You can definitely drive slower if u put the low range gears in it u have to buy them separately i have the trail gears so yes it does act up for sure its a bit tricky to control on slow crawls but fast enough for me to make video without speeding the cam up

  • @philippedenis7650
    @philippedenis7650 ปีที่แล้ว +1

    Great video !