Thanks IV8888 team! For the LRBHO, anyone can swap to a different Lifter to ensure the BCG cycles fully. Every Bearing Delay upper includes 2 Lifters. Seems like Eric is shooting the standard K Lifter. Changing the Lifter will adjust the dwell time to make the gun run more aggressively or slower. We have Lifter designed to make sure the upper will cycle with really low power ammo and we have Lifters designed to reduce recoil for higher power ammo (like +P+). Lots of people curious about Glock magazines... yes, the upper works with every Glock lower that we've tried. You will need to remove the ejector from the lower, which is usually a couple of fasteners. As Eric showed, we have LRBHO with our magazine systems. For a Glock lower setup, LRBHO depends on the lower... so some will and some won't MEAN currently has 10% off all orders (including the upper) with code: INFLATIONSUCKS And, we have a layaway option of the upper Every upper includes lifetime free service and our Lifetime Warranty - if you ever have a problem with the upper, we will fix or replace it
I have the 9mm uppers from CMMG. I use your conversion mags adapters for that upper I was wondering if you might possibly be coming out with a mag/ conversion kit for the CMMG 40 caliber uppers. I would also like to know if you’re going to come out with a 40 caliber upper, that would use a standard lower.
Hey Eric, glad to see you back at the range. Podcasts are great, but would love to see you get back to some OG content. Where has Chad been? He has been absent from videos for quite some time. Would appreciate an update. Always Faithful, Always Forward. Thankyou. Aaron Beaulieu
There are 5 different lifters that you use to tune the rifle, the best choice is determined by the ammo you're using and shooting suppressed or not etc. If you have an issue with cycling changing the lifter can be the difference. I own a 16" of this gun. I had some minor issues to work out and had a fantastic experience working with MEAN on it and got incredible support from them. It now runs flawlessly. The upper comes with 2 lifters but there are others, a lifter changes your dwell time with the bolt closed by changing the angle on the face of the lifter which changes the force needed to actuate the locking mechanism. I built mine out to be pretty fancy and i love it. The endomags work great too. The issues i had weren't related to the upper itself and un the end turned out to be the captured buffer i was using, switching to a normal h2 and flat spring fixed it up entirely. I am trying another captured system this weekend (hopefully), but had an issue with the armaspec h2 captured buffer.
I had issues with the Armaspec gen 4 SRS buffer as well. The small secondary spring is what provides the preload and it wasnt enough pressure to seat the BCG. I made a nylon spacer to sit behind that spring to increase preload and it worked. I ultimately switched it out to a standard Tubbs flatwire and kynshot and that thing is smooth.
@@ZEE0H6 nice, mine was a gen3 H2. A normal flat spring and H2 worked just fine. I now have the unrivaled duty buffer in there which is carbine weight and haven't had any problems so far but only about 250 through it since then.
Okay, this looks like an awesome system but for $1500, I can take a little heat and recoil. Very cool upper though! If I had the $$$$ I would definitely roll one of those. Thanks for the Video!
@@bestyoutubechannelever3206 Hawaii don't care. They pass bad laws knowing that it will take a few years to get them scrubbed. That way the duchebags... I mean politicians can say that they voted for the safety of the people.
Yeah, wtf is that about?! Most manufacturers skimp out, use inferior alloys of aluminum (six thousand series) rather then going with 7075 t6, but they can be made serviceable, unlike a polymer handguard. I'm not a big fan of any wear part being made from polymer, just due to the legislation that's been getting passed across the nation lately.
im fine with the handguard its just cmmg rdb bolt and barrel is only 380 just bought it a week ago and a simple handguard slick upper combo was 150 max, its just way too much in comparison to its competition
CMMG has the same type of insert for P-Mags. CMMG also has a rotary delay blow back 9mm upper. I have been very happy with the reliability of the CMMG.
@@blackfacegaming191the CMMG version does not have an ejector built into the mag because there is one in the upper on the banshee. But yes I have worn out the ejector in the standard version of the mag inset too. MEAN replaced it though
Way better alternative to this rifle. The fact they skimped, and went with a polymer handguard is a joke. I'm sure they will use the weight justification, when its really about profit margins. Its difficult to make a rigid, and relieble aluminium handguard; polymer shouldn't be considered for a handguard or any wear part material, especially one with a rail.
The can is moving like it has a piston spring in it for use in a tilting barrel pistol . Can that can be changed to a fixed spacer such as what the Silencerco Osprey uses ?
Gambling using that pistol can with a booster in it i see lol. Seems like it did okay though! This bearing delay thing is super cool, I'm stuck between it and the CMMG radial delay.
yes! the upper works with every Glock lower that we've tried. You will need to remove the ejector from the lower, which is usually a couple of fasteners. As Eric showed, we have LRBHO with our magazine systems. For a Glock lower setup, LRBHO depends on the lower... so some will and some won't
yes! the upper works with every Glock lower that we've tried. You will need to remove the ejector from the lower, which is usually a couple of fasteners
What about a best millimeter version? $1,500 for a upper only is a shit ton for 9mm with so many offerings of full guns in 9mm that are good. I can MAYBE see spending $1500 on a 10mm upper if its dead nuts reliable and gives the best recoil ruduction of what's already available from Stribog and CMMG.
@@cerneysmallengines highly suggest picking up some additional lifters to tune it your ammo, spring, and buffer setup to maximize the potential of the system. It’s a huge reason why I went with this over the CMMG. I’m using the P lifter with factory 115gr.
@@ZEE0H6 so, my 2 setups are as follows 12.5" cmmg 9mm 8" cmmg 9mm the 12.5 has a standard style cmmg lower that I run endomags in. the 8" is on a PSA AR9 lower that takes glock mags the 12.5" is running the normal ar15 buffer spring with an ar9 weight the 8" is running a standard buffer weight with an ar10 spring in it. both have been incredibly reliable, the 8" shoots a lot softer
It's a recoil booster or Nielsen device. Some handguns need the extra boost to cycle reliably with a suppressor. The extra weight on the barrel can even stop it cycling. A fixed barreled gun like this doesn't need it. But cool we got to see it working on this video.
@@schrodingersgat4344I agree with your sentiment. I figured it would be spendy. Anything roller delayed or bearing delayed is always priced in an unfortunate manner.
you know on second thought my ruger pccarbine gets hot as a mother with a binary trigger with just a few mags maybe the polymer isnt a bad idea for heat reduction
For a 1500 🫘 good luck. Looks nice but so do the 3 other FTM9 complete builds I built for the same cost. A 9mm AR is what it is a fun range toy. Cool video and an expensive cool toy, just not one for me. 🗽✌🏻
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
Thanks IV8888 team!
For the LRBHO, anyone can swap to a different Lifter to ensure the BCG cycles fully. Every Bearing Delay upper includes 2 Lifters. Seems like Eric is shooting the standard K Lifter. Changing the Lifter will adjust the dwell time to make the gun run more aggressively or slower. We have Lifter designed to make sure the upper will cycle with really low power ammo and we have Lifters designed to reduce recoil for higher power ammo (like +P+).
Lots of people curious about Glock magazines... yes, the upper works with every Glock lower that we've tried. You will need to remove the ejector from the lower, which is usually a couple of fasteners. As Eric showed, we have LRBHO with our magazine systems. For a Glock lower setup, LRBHO depends on the lower... so some will and some won't
MEAN currently has 10% off all orders (including the upper) with code: INFLATIONSUCKS
And, we have a layaway option of the upper
Every upper includes lifetime free service and our Lifetime Warranty - if you ever have a problem with the upper, we will fix or replace it
I have the 9mm uppers from CMMG. I use your conversion mags adapters for that upper I was wondering if you might possibly be coming out with a mag/ conversion kit for the CMMG 40 caliber uppers. I would also like to know if you’re going to come out with a 40 caliber upper, that would use a standard lower.
I just shot an mp5 in Vegas. It's recoil was way more aggressive than a couple of tuned blowback ar9 using MEAN arms mags I've shot in the past.
Eric nailed the Walter look from The Big Lebowski 👌🏻
Lmao, spot on. But i bet he doesn't take a 1911, he totally bowls with a makarov 😅
Stay out of this Donny!
Ha! I just commented the same thing without realizing you had already posted😂
Damn, facts. 😃👍🏽
Nice! Ejection pattern was spot on. Gotta get one of these for my F/A lower.
👍
Finally a range video. I miss y’all on the range
Welcome back iraqveteran ADA-ADA
Keep the range videos coming! I love the gunsmithing videos also!!!
Sick serial killer glasses. Almost better then BCGs.
BCGs. Lmfaoooo I haven’t heard that since my service days.
Hey Eric, glad to see you back at the range. Podcasts are great, but would love to see you get back to some OG content. Where has Chad been? He has been absent from videos for quite some time. Would appreciate an update. Always Faithful, Always Forward. Thankyou. Aaron Beaulieu
Love the content..we love to also hear the weapon suppressed, without hitting the metal...Thanks!!!!
Haha, Eric looks like John Goodman in the movie The Big Labowski with that vest on. "Mark it zero!!"
There are 5 different lifters that you use to tune the rifle, the best choice is determined by the ammo you're using and shooting suppressed or not etc. If you have an issue with cycling changing the lifter can be the difference. I own a 16" of this gun. I had some minor issues to work out and had a fantastic experience working with MEAN on it and got incredible support from them. It now runs flawlessly. The upper comes with 2 lifters but there are others, a lifter changes your dwell time with the bolt closed by changing the angle on the face of the lifter which changes the force needed to actuate the locking mechanism. I built mine out to be pretty fancy and i love it. The endomags work great too. The issues i had weren't related to the upper itself and un the end turned out to be the captured buffer i was using, switching to a normal h2 and flat spring fixed it up entirely. I am trying another captured system this weekend (hopefully), but had an issue with the armaspec h2 captured buffer.
I had issues with the Armaspec gen 4 SRS buffer as well. The small secondary spring is what provides the preload and it wasnt enough pressure to seat the BCG. I made a nylon spacer to sit behind that spring to increase preload and it worked. I ultimately switched it out to a standard Tubbs flatwire and kynshot and that thing is smooth.
@@ZEE0H6 nice, mine was a gen3 H2. A normal flat spring and H2 worked just fine. I now have the unrivaled duty buffer in there which is carbine weight and haven't had any problems so far but only about 250 through it since then.
Okay, this looks like an awesome system but for $1500, I can take a little heat and recoil. Very cool upper though! If I had the $$$$ I would definitely roll one of those. Thanks for the Video!
That's an awesome gun I'm fixing to be building an AR9 in a couple of weeks in SDI that's going to be awesome.
I like mean arms mags. Great for Hawaii because it's not a pistol mag and therefore not subject to our pistol 10 round limit
If SCOTUS strikes down magazine capacity limit laws, you won't have to worry about that anymore. There are seberal challenges to those laws right now.
@@bestyoutubechannelever3206 Hawaii don't care. They pass bad laws knowing that it will take a few years to get them scrubbed. That way the duchebags... I mean politicians can say that they voted for the safety of the people.
1500 with a polymer handguard
Yeah, wtf is that about?! Most manufacturers skimp out, use inferior alloys of aluminum (six thousand series) rather then going with 7075 t6, but they can be made serviceable, unlike a polymer handguard. I'm not a big fan of any wear part being made from polymer, just due to the legislation that's been getting passed across the nation lately.
im fine with the handguard its just cmmg rdb bolt and barrel is only 380 just bought it a week ago and a simple handguard slick upper combo was 150 max, its just way too much in comparison to its competition
Great review!! Thank you👍🏼
Great firearm ,ate all those round and said "more please"
I miss Barry.
I'm sure he's looking down.
@@anthonycalbillo9376 and scoffing . He would just bump fire a high point
Running a booster on the can?
I wonder what just the upper costs?
You used to be king of gun tube but now I don’t even see your uploads. You need to do more of what your audience wants
These glasses look so 70ties! But I love it! And a cool gun! Keep it up!
Good video brother
Why is there a piston on the suppressor on a fixed barrel sub gun?
Just got home from subway and got this notification.
LETS GO
Love the chanel love what yall do keep up the good work 😊😊😊
I would love for you to compare this vs the Maxum defense roller delayed buffer and do a meltdown of both
Eric you should get the HiTec Arms AR9SD upper for T&E. It features the Mean Arms bearing delayed BC with HTA MP5 SD suppressor!
CMMG has the same type of insert for P-Mags. CMMG also has a rotary delay blow back 9mm upper. I have been very happy with the reliability of the CMMG.
Those have wear parts though right
That's the same mag from MEAN arms in the CMMG
@@blackfacegaming191the CMMG version does not have an ejector built into the mag because there is one in the upper on the banshee. But yes I have worn out the ejector in the standard version of the mag inset too. MEAN replaced it though
Way better alternative to this rifle. The fact they skimped, and went with a polymer handguard is a joke. I'm sure they will use the weight justification, when its really about profit margins. Its difficult to make a rigid, and relieble aluminium handguard; polymer shouldn't be considered for a handguard or any wear part material, especially one with a rail.
Mean arms did it first. Cmmg just followed
You can get a whole cmmg gun with the roller delayed system for that price. Not just the upper.
cmmg is a radial delayed system.
Who makes that anti rotation clamp on the hand guard? Great video guys.
It’s part of the handguard. The handguard threads onto the proprietary barrel nut and those pieces clamps it onto the receiver.
@@ZEE0H6 does that include the clamp that bridges the top Pic rail between the upper receiver and hand guard?
Nice job
The can is moving like it has a piston spring in it for use in a tilting barrel pistol . Can that can be changed to a fixed spacer such as what the Silencerco Osprey uses ?
I'm sold. I want one. Checks price: Yipes!
The use of ball bearings for delay instead of traditional methods like rollers or rotating bolt heads truly enhances the smoothness and reduces recoil
That is a nice upper going to see how much one is would be nice to have one in 9mm .....
I read up on this system, they state that you need to tune for subs etc. with different bearings
yes, the Lifter can be changed to adjust the dwell time to optimize the system but the standard Lifter works with many different setups as shown here
I'm new at owning firearms, so, is that what a suppressor is supposed to do, because that's cool!
Love you Sir Your Big Fan ❤✌💋
I would like to have seen information on the "Bearing Delay". You showed it for only a few seconds.
let us know if you want more information about Bearing Delay
How can you leave two liters un shot???
I'm curious,
Are the bearings locking up on aluminum?
No, the bearing engage pockets in our steel barrel extension, which is threaded onto the barrel
Gambling using that pistol can with a booster in it i see lol. Seems like it did okay though! This bearing delay thing is super cool, I'm stuck between it and the CMMG radial delay.
What is the weight of the bolt? What is the weight of the total reciprocating mass with the H1 buffer?
Cool, but $1,500 with a plastic hand guard? You can get a MP5 clone for $1,000 if you look hard enough.
At the 10:35 mark, when going full - is it me or is there also a lot of gassing going down and out the bottom of the magazine? Is that pretty common?
Nice
Does this upper work with AR9 lowers running Glock mags, and does it have LRBHO ?
Most like no on ar9 lower do to the bcg design
yes! the upper works with every Glock lower that we've tried. You will need to remove the ejector from the lower, which is usually a couple of fasteners. As Eric showed, we have LRBHO with our magazine systems. For a Glock lower setup, LRBHO depends on the lower... so some will and some won't
Shoosh. $1500.00 for the upper. Thats a whole lot of cheese to launch 9mm.
Makes more sense to get one of the mp5 clones. About the same price only you have the reliability
Curious why are you running a nielsen device on a fixed barrel?
Bro, why are you wearing the Groucho glasses 😅
Will it work with a 9mm Glock lower?
yes! the upper works with every Glock lower that we've tried. You will need to remove the ejector from the lower, which is usually a couple of fasteners
Why does suppressor move forward when firing a round?
What about a best millimeter version? $1,500 for a upper only is a shit ton for 9mm with so many offerings of full guns in 9mm that are good. I can MAYBE see spending $1500 on a 10mm upper if its dead nuts reliable and gives the best recoil ruduction of what's already available from Stribog and CMMG.
Not too bad as your head was obscured by the smoke fo the ejection port. Lol
how does it compare to the CMMG 9mm system?
No comparison, the MEAN is way softer and flatter shooting than the CMMG radial delay system.
@@ZEE0H6 I have 2 of the cmmg AR9s, they are incredible to shoot, that leaves me very anxious to get my hands on this
@@cerneysmallengines highly suggest picking up some additional lifters to tune it your ammo, spring, and buffer setup to maximize the potential of the system. It’s a huge reason why I went with this over the CMMG. I’m using the P lifter with factory 115gr.
@@ZEE0H6 so, my 2 setups are as follows
12.5" cmmg 9mm
8" cmmg 9mm
the 12.5 has a standard style cmmg lower that I run endomags in.
the 8" is on a PSA AR9 lower that takes glock mags
the 12.5" is running the normal ar15 buffer spring with an ar9 weight
the 8" is running a standard buffer weight with an ar10 spring in it.
both have been incredibly reliable, the 8" shoots a lot softer
The barrel actually moves back and forth. I'm sure it's designed that way, but I'm not sure how or why....
I think thats the piston on the silencer your seeing movng.
It appears to be the booster on the can moving forward and back. The barrel.should be a solid mount like any other AR upper.
The suppressor has a spring loaded mount
Why would you put a booster on a rifle suppressor? Lol.
It's a recoil booster or Nielsen device. Some handguns need the extra boost to cycle reliably with a suppressor. The extra weight on the barrel can even stop it cycling. A fixed barreled gun like this doesn't need it. But cool we got to see it working on this video.
Are you aware your Facebook page was hacked?
you not running fix barrel spacer in the can its moving a lot?
How about something other than 5.56/9mm/12ga/.22LR for once?
please compare this to the Angstead MDP9
$1500?!! That’s unfortunate.
I'll tell you what ,is, fortunate.
This comment was the one displayed beneath the thumbnail.
I thank you for preventing me from waisting my time.
@@schrodingersgat4344I agree with your sentiment. I figured it would be spendy. Anything roller delayed or bearing delayed is always priced in an unfortunate manner.
@@joshuagibson2520 Not a CZ-52.
G-3 for your hip!
They have to get their R&D costs back somehow.
1,500 American Pesos isn't really that bad. I put 12 into a 635 build. Roller locks like PTR & Zenith start around 18.
Why does it look like the barrel and silencer are moving back and forth on the upper
Cuz it is
I think that’s from the ball bearing delay.
the suppressor is moving, the barrel is stationary
i would buy one, but i have a problem buying a gun at this price point with a polymer handgaurd.
you know on second thought my ruger pccarbine gets hot as a mother with a binary trigger with just a few mags maybe the polymer isnt a bad idea for heat reduction
What is that little anti-rotation device in the pick rail at the back of the handguard?
There’s one on each side. The handguard threads onto the proprietary barrel nut and those pieces clamps it onto the receiver.
11:20 ricochet and hit the soda bottle
Hi
Why is his can all moving like its on a piston system ala Nielsen device
Booster on a fixed barrel? interesting...
What no 10mm
Love the Gideon Mediator. It's like an affordable Acro.
Spare pmag? You're funny.
Chad 5:46
Mp5 lovers cry on
unit senpi yang paling bagus sekali selama ini saya liat, modelnya kaya unit PCP,
That weapon farts gas like an old lady eaying cabbage. Gross.
Nice double taps, 9mm SUCKS ❤
Lol not spring here it's 45 degrees here and it going to get colder here in Kansas
1500 for a 9mm upper?? Can almost get two Geissele uppers in Black Friday for that. Pass
For a 1500 🫘 good luck. Looks nice but so do the 3 other FTM9 complete builds I built for the same cost. A 9mm AR is what it is a fun range toy. Cool video and an expensive cool toy, just not one for me. 🗽✌🏻
wish average guys could have masheen guns
They can.
@@joshuagibson2520 not legally
@@x0j oh. Okay. Last I knew, free men didn't ask permission.
The use of ball bearings for delay instead of traditional methods like rollers or rotating bolt heads truly enhances the smoothness and reduces recoil