The Rogue Cronus and Jbl L100 is just an awesome combo, one of the more engaging and fun systems I have heard in a long time. Hits way above their weight class
just got this in today to replace a broken luxman. using with devore fidelity super nine's and dynaudio heritage specials. so far ...awesome ,beautiful sounding. runs hotter than the vincent k35
OMG! My kind of equipment, Rogue Audio! I have a Rogue Audio Magnum 99 tube preamp paired to a Musical Fidelity A308cr,. Both are OVER 15 years old and still sound SWEET. I’m thinking of adding a streamer, don’t want to break the bank or ad dedicated DAC, what do you recommend? I have a set of unused outputs on my Rogue itching to be used.
Kendrick Davis thanks for the recommendations, unfortunately both of those pieces cost more than I want to spend. I guess it will be Bluesound or Auralic?
Looks really nice----I'm considering the move from SS equipment to tubes and this is in my price range. I have a pair of Dynaudio Special 40 speakers that love power. Do you think this would be a good match? And can you explain the 'gain' and why I would need to adjust this. Thanks so much!
Hi Dwight. Thanks for your comment. We love this amplifier and it would do well with this amplifier. The adjustable gain we were referring to is in the Phono Preamp Stage of this amplifier and is used to provide the different gain (an increase of power, i.e volume) needed for high and low output Moving Coil and Moving Magnet cartridges.
As soon as Mark O'Brien announced that Cronous Magnum 3 was going to be available soon we ordered some right away. We suspected that it would be great and it is. It really sounds great.
Hi Question,, do they both 4 ohm and 8 ohm taps on the back?,, in the literature I cant find a picture. On the II you have to pop the top and swap wires to change form 8 ohm to 4 ohm, it would be so simple to have both 4 and 8 ohm speaker connections on the back panel for just a few dollars more.
Hi Steve. Thank you for your question. The back of the amplifier only has one set of binding posts. Either the factory at the time of the order, our service department, or an informed owner with a Philips screwdriver can make the change internally after removing the cover. It is just a matter of reconnecting a different colored wire.
@@BrooksBerdanLtd After making the switch from 8 ohm to 4 ohm, is the power output still only 100 watts? I ask because I'm considering this for Magnepan 1.7i's. Also, what's the damping factor?
Thanks for your question J v. We don't think that one is better than the other, but there are differences. I would say that the Rogue has the advantage in the midrange and high-frequency smoothness. It has lush and mellow ease that is seductive. The MOON 240i is for a solid state amplifier, dynamic, and has a solid sense of drive, especially with the Bass. Both units have a built-in Phono Pre-Amp, though the preamp in the Rogue has variable loading and can also do Moving Coil cartridges. The Rogue is less expensive, $2300 vs $2995 and the remote on the MOON will switch inputs. The MOON has a 10-year warranty. I think we are partial to the sound of the Cronus, but the MOON has a DAC, more features, and less$. Can't go wrong. Sorry we are not super hands-on familiar with the NAIM as we are with the others. I know it's good stuff. Maybe a little overpriced.
I like it enough to buy save for one glaring omission; no tone controls. The way music sounds to each individual is not "one size fits all". I want tone controls, and I don't want to have to put an EQ in the music stream to accomplish that. The less interconnects the better. And hey Rogue, while you're at it, put an extra set of speaker outputs on the back for those who want to run bi wiring. Four more binding posts don't add that much to the cost and it sure makes it a lot easier.
@@larryfontana9207 Doesn't make it right, just makes it the flavor of the day. Modern by-passable digital tone controls would appeal to a larger customer base.
Hey, thanks for asking. We still sell vinyl though now it's in a different part of the store. We are always bringing in both new and used selections. Stop by and check it out.
Gee...in the video you and your assistant made picking up 75 lbs. look easy like it was only 30 lbs.! Setting it up should be a cinch for my audio guy in a few days. ; > ))
@@patrikbjorling4391 Yes it did turn out better overall but mainly due to the Power Amp unit. One other thing though: at first I did not like the industrial look of the Rogue but it grows on you.
Thanks for your comment. It really is a nice amp. Having an adjustable bias has some design and sound advantages. Most Owners will never need to adjust the bias unless they change the tubes, and it really is very easy. Tubes should last at least 6 to 8 years and many owners go 10 to 15 years. Just be sure to monitor them, and that is easy too.
The Rogue Cronus and Jbl L100 is just an awesome combo, one of the more engaging and fun systems I have heard in a long time. Hits way above their weight class
Nice detail and imaging...a dream come true.
I have this Cronus Magnum III with the JBL 4429 Loudspeakers, Superb!!!
Thanks for the video. How would you compare the Cronus III vs the Sphinx V3 in terms of tonal qualities? Cheers.
Tonal quality would be better on the Cronus Magnum Mk 3
just got this in today to replace a broken luxman. using with devore fidelity super nine's and dynaudio heritage specials. so far ...awesome ,beautiful sounding. runs hotter than the vincent k35
Does it have enough power fo the HS? Was considering the CMIII to drive mine...
Thanks.for the nice review I've been thinking of getting this d amp for my JBL 4321se speakers
OMG! My kind of equipment, Rogue Audio! I have a Rogue Audio Magnum 99 tube preamp paired to a Musical Fidelity A308cr,. Both are OVER 15 years old and still sound SWEET. I’m thinking of adding a streamer, don’t want to break the bank or ad dedicated DAC, what do you recommend? I have a set of unused outputs on my Rogue itching to be used.
Try either an Aurander A10DAC or a MOON 280D with Mind2 built in. Call the store when they are open. Both are available.
Kendrick Davis thanks for the recommendations, unfortunately both of those pieces cost more than I want to spend. I guess it will be Bluesound or Auralic?
Is there any point in this if you own a denon x8500h 13.2 150w per channel powered avr?
How different does it sound in triode mode? I have only ever owned triode amps.
Looks really nice----I'm considering the move from SS equipment to tubes and this is in my price range. I have a pair of Dynaudio Special 40 speakers that love power. Do you think this would be a good match? And can you explain the 'gain' and why I would need to adjust this. Thanks so much!
Hi Dwight. Thanks for your comment. We love this amplifier and it would do well with this amplifier. The adjustable gain we were referring to is in the Phono Preamp Stage of this amplifier and is used to provide the different gain (an increase of power, i.e volume) needed for high and low output Moving Coil and Moving Magnet cartridges.
Dwight R the tube amps are so much more musical sounding than solid state very enjoyable to listen to very sweet and smooth
How would this Amp work with Magnepan Tympani 1D speakers? Thinking of having Maggies refurbished
You seem to be the only shop selling this model III .. Rogue Audio's website has no mention of this model ... and I couldn't find anything online ..
As soon as Mark O'Brien announced that Cronous Magnum 3 was going to be available soon we ordered some right away. We suspected that it would be great and it is. It really sounds great.
It has since been listed by Rogue in the NEWS section of the RogueAudio Web Site. As we listen to it more and more we can't love it enough.
HOW DOES THIS COMPARE THOE THE SPHINX?
When I can afford it the amplifier I will buy ive always wanted one since they first come out very nice
Hi Question,, do they both 4 ohm and 8 ohm taps on the back?,, in the literature I cant find a picture. On the II you have to pop the top and swap wires to change form 8 ohm to 4 ohm, it would be so simple to have both 4 and 8 ohm speaker connections on the back panel for just a few dollars more.
Hi Steve. Thank you for your question. The back of the amplifier only has one set of binding posts. Either the factory at the time of the order, our service department, or an informed owner with a Philips screwdriver can make the change internally after removing the cover. It is just a matter of reconnecting a different colored wire.
@@BrooksBerdanLtd After making the switch from 8 ohm to 4 ohm, is the power output still only 100 watts? I ask because I'm considering this for Magnepan 1.7i's. Also, what's the damping factor?
how would it be compared to the moon 240i? i know its not the same, how would they compare? im considergint both of them or naim nait 5si
Thanks for your question J v. We don't think that one is better than the other, but there are differences. I would say that the Rogue has the advantage in the midrange and high-frequency smoothness. It has lush and mellow ease that is seductive. The MOON 240i is for a solid state amplifier, dynamic, and has a solid sense of drive, especially with the Bass. Both units have a built-in Phono Pre-Amp, though the preamp in the Rogue has variable loading and can also do Moving Coil cartridges. The Rogue is less expensive, $2300 vs $2995 and the remote on the MOON will switch inputs. The MOON has a 10-year warranty.
I think we are partial to the sound of the Cronus, but the MOON has a DAC, more features, and less$.
Can't go wrong.
Sorry we are not super hands-on familiar with the NAIM as we are with the others. I know it's good stuff. Maybe a little overpriced.
Now that’s a nice rig! Definitely diggn the “orange” ‘70’s JBL speaker grills......G A - R O O V Y
keeferdog yours for 4 grand:)
I like it enough to buy save for one glaring omission; no tone controls. The way music sounds to each individual is not "one size fits all". I want tone controls, and I don't want to have to put an EQ in the music stream to accomplish that. The less interconnects the better. And hey Rogue, while you're at it, put an extra set of speaker outputs on the back for those who want to run bi wiring. Four more binding posts don't add that much to the cost and it sure makes it a lot easier.
Most all high end audiophile integrated amps do not have tone controls
@@larryfontana9207 Doesn't make it right, just makes it the flavor of the day. Modern by-passable digital tone controls would appeal to a larger customer base.
@@hobo1452 Agreed! I vote for tone controls as well.
is there any point in this if you own a denon x8500h 13.2 150w per channel powered avr with goldenear triton one.r towers?
Hello, do you guys still have the record shop at the back?
Hey, thanks for asking. We still sell vinyl though now it's in a different part of the store. We are always bringing in both new and used selections. Stop by and check it out.
Just when I am looking for the CM2, the CM3 comes out! Nice ... How does it compare in terms of sound in UL mode with the CM2?
Gee...in the video you and your assistant made picking up 75 lbs. look easy like it was only 30 lbs.! Setting it up should be a cinch for my audio guy in a few days. ; > ))
Beautiful amp! Wow
How much???
$2,995
I had the II version in my system for a few weeks. It does weigh a ton. The sound was very dynamic and I loved it.
What did you replace it with?
@@tommethans7827 ATC Pre-amp and ATC P1 power Amp. I decided to go for separates.
@@zogzog1063 Did it turned out "better"?
@@patrikbjorling4391 Yes it did turn out better overall but mainly due to the Power Amp unit. One other thing though: at first I did not like the industrial look of the Rogue but it grows on you.
i wish it had auto-bias really nice amp
Thanks for your comment. It really is a nice amp. Having an adjustable bias has some design and sound advantages. Most Owners will never need to adjust the bias unless they change the tubes, and it really is very easy. Tubes should last at least 6 to 8 years and many owners go 10 to 15 years. Just be sure to monitor them, and that is easy too.
If you can adjust the flame on a gas burner , you'll
be able to adjust the bias :)
Absurd you are not interested in answer any question, not any comment neither.
But is your bussiness, your pre and post selling service. Regards.
This is an idiot design. There are four electrolyte condensator near the KT120.
What?