I always have a goal to create a workshop where dust collection facilities are automatically operated when all equipment is used. To make such a system, first of all, it is necessary to create a dust collection tube line that is automatically opened and closed with a switch. So, I made equipment that opens and closes the 50mm dust collection tube with a small air cylinder with a 60mm stroke. I used a little skill to open and close the four places without being bulky. To avoid interference with other dust collection pipes, the switchgear that has been dug out of the center will move. The movement itself is very satisfying. Another feature of this work is that it uses a transparent acrylic tube as a dust collection tube. You can see the path of dust movement, and it is designed to look beautiful as an interior on the wall. It may be easy for plumbers, but I've had a few trials and errors for the first time working on a line like this. Plus, I was going to create four switches that can operate the solenoid wire and the dust collector wire at once and link them to the drill press. By simply turning the handle of a specific drill press, the opening and closing of the dust collection line will automatically open and the dust collector will be activated. In the past, I used to do a lot of hiding dust collection tubes in walls or behind tables. However, I thought that I wanted to install the dust collection process, one of the most important parts of woodworking, on the wall and see it with my eyes. If possible, I designed it so that I could even see the movement of dust using a transparent acrylic tube. When I finished it, it's beautiful enough to be used as an interior. Even if it takes time, I feel like I should change all the dust collection tubes in my workshop to transparent acrylic. In this work, there were many electrical works such as pneumatic cylinders, solenoids, magnet switches, reed switches, and LEDs. It's not a difficult task. If you want to try something new, you have to know how to do it. And I connected a reed switch to a drill press and made a system in which the switch was automatically opened and the dust collector was activated when the lever for drill work was pulled. I think I can focus only on the work without paying attention to dust collection when I work on the drill. Since the switching line is made of jack, the dust collector can also be operated with a foot switch. Sooner or later, I will make a total of 4 automatic opening and closing lines and install them on other equipment. Finally, I completed the drill press automatic dust collection system. If you pay attention to installing the reed switch, I think it can be mounted on your drill press, too. Enjoy watching the video, and please subscribe and like it. Thank you.
Pure genius. I've just recently returned to woodworking. I can learn the skills, but your genius is God given. You are not a woodworker. You are an artist.
Just went I thought you have the best dust collection on a drill press that I’ve ever seen you step it up a notch and bring it to another level. Thanks for inspiring me to lift my game and create better builds
Really cool project again! When I saw the yellow tape on the moving parts for better visibility I thought of EL Tape (Electroluminescent Tape). I think that could also look very cool/interesting in some of your projects.
I run a small factory and occasionally invent things. Thanks to TH-cam, I'm happy to be able to share what I do with you. Someday, I will introduce you to a patented product I own. thank you!
That's accurate. I'm the type of person who, when I think of something, I immediately act on it. So it is true that it lacks practical aspects. But I always enjoy trying new works. Difficult tasks arise every time. The process of overcoming it is the vitality of life for me. I'm also very happy that there are people who can enjoy the process together. thank you!
I always have a goal to create a workshop where dust collection facilities are automatically operated when all equipment is used.
To make such a system, first of all, it is necessary to create a dust collection tube line that is automatically opened and closed with a switch.
So, I made equipment that opens and closes the 50mm dust collection tube with a small air cylinder with a 60mm stroke.
I used a little skill to open and close the four places without being bulky.
To avoid interference with other dust collection pipes, the switchgear that has been dug out of the center will move.
The movement itself is very satisfying.
Another feature of this work is that it uses a transparent acrylic tube as a dust collection tube.
You can see the path of dust movement, and it is designed to look beautiful as an interior on the wall.
It may be easy for plumbers, but I've had a few trials and errors for the first time working on a line like this.
Plus, I was going to create four switches that can operate the solenoid wire and the dust collector wire at once and link them to the drill press.
By simply turning the handle of a specific drill press, the opening and closing of the dust collection line will automatically open and the dust collector will be activated.
In the past, I used to do a lot of hiding dust collection tubes in walls or behind tables.
However, I thought that I wanted to install the dust collection process, one of the most important parts of woodworking, on the wall and see it with my eyes.
If possible, I designed it so that I could even see the movement of dust using a transparent acrylic tube.
When I finished it, it's beautiful enough to be used as an interior.
Even if it takes time, I feel like I should change all the dust collection tubes in my workshop to transparent acrylic.
In this work, there were many electrical works such as pneumatic cylinders, solenoids, magnet switches, reed switches, and LEDs.
It's not a difficult task. If you want to try something new, you have to know how to do it.
And I connected a reed switch to a drill press and made a system in which the switch was automatically opened and the dust collector was activated when the lever for drill work was pulled.
I think I can focus only on the work without paying attention to dust collection when I work on the drill.
Since the switching line is made of jack, the dust collector can also be operated with a foot switch.
Sooner or later, I will make a total of 4 automatic opening and closing lines and install them on other equipment.
Finally, I completed the drill press automatic dust collection system.
If you pay attention to installing the reed switch, I think it can be mounted on your drill press, too.
Enjoy watching the video, and please subscribe and like it.
Thank you.
Pure genius. I've just recently returned to woodworking. I can learn the skills, but your genius is God given. You are not a woodworker. You are an artist.
This is incredible
Thanks for your praise!!!
모든 작업이 저한테는 생소함에도 점점 빠져들며 보게되네요 무에서 유를 창조하는!!
관련분야가 아님에도 제 영상을 시청해 주셔서,
깊은 감사를 드립니다.
A whole new level of “DIY” device!
wow. everything is so meticulously planned, so clean, organized and neat. beautiful work.
👍👍👍Grandios!
Just went I thought you have the best dust collection on a drill press that I’ve ever seen you step it up a notch and bring it to another level. Thanks for inspiring me to lift my game and create better builds
Your writing glows more softly than my 3,000K LED light. I would like to express my sincere gratitude.
Great work as always 👍👍
I would like to express my sincere gratitude.
Awesome project as always
Thanks for your interest, always.
You are inspiring to make amazing things
I wish you luck
I believe that a mutually stimulating relationship is a meeting based on true understanding. thank you!
Really cool project again!
When I saw the yellow tape on the moving parts for better visibility I thought of EL Tape (Electroluminescent Tape). I think that could also look very cool/interesting in some of your projects.
이번 작품도 👍 👍 👍!
그런데 조명에 진심이이네요.ㅎㅎ
그래서 더 빛나보이는것 같습니다.
한동안 3,000K 은은한 불빛에 빠져 있었습니다.^^
그런데 조명을 넣는순간, 사실은 일이 좀 많아져요.
그래도 만들어놓고 나면 애쓴 보람이 있지 싶습니다.
감사합니다.
👍 до просмотра.
Thanks for your sincere words!!!
Amazing work! I have to ask, what is your current profession? You're very talented.
I run a small factory and occasionally invent things. Thanks to TH-cam, I'm happy to be able to share what I do with you. Someday, I will introduce you to a patented product I own. thank you!
안녕하세요 카이님 영상 12분 52초에서 아크릴 파이프를 잡아주는 빨강색 손잡이가 있는 스탠드 상풍명이 궁급 합니다.
꺾이는 관절이 있는 파이프는 이케아의 BROGRUND 라는 거울의 지지대를 사용했구요, 거기에 베어링을 끼우고 빨간색 손잡이 볼트를 장착했습니다.
감사합니다.
아 상상도 못한 제품을 사용 하셨군요. 답변 감사 드립니다.
Does anyone else remember Rube Goldberg. I think I’ll just stick with my shop vac hose and zip ties. Great job though.
That's accurate. I'm the type of person who, when I think of something, I immediately act on it. So it is true that it lacks practical aspects. But I always enjoy trying new works. Difficult tasks arise every time. The process of overcoming it is the vitality of life for me. I'm also very happy that there are people who can enjoy the process together. thank you!
😅Toccata aus der Toccata und Fuge d-Moll (BWV 565) von johans sebastian bach