Necessity is the mother of Creation. You prove it Dear Master. As far as it works to our requirements, it is as good as any of the models by Grizzly, Felder, Martin, SCM etc etc. Improvements and tweakings will continue as you keep using. Your work deserves appreciation and admiration. So Love and Best Wishes with Regards from India. Keep it up.
I'm constantly amazed at the inventiveness I see from some youtubers... You are no exception! 👏👏👏👏 Fantastic job! It's amazing what you can do with some linear bearings and plywood. Simply wonderful. I just love 💕 it. I really want to build a sliding table for my saw. At first I didn't understand why you went with the vertical configuration with the bearings and rails but I get it now. Great idea! 🍻
I love it!!! I've been watching all these saw videos I can find to copy one, and I really think this is the best one so far!!! I might modify it to fit a handheld planer. I like the slide, and it MUST be pretty rugged. I thought you were going to wear it out, but it held up!!! LOL Thank you for sharing your great idea!!!
I have been looking for such a good project for my Metabo TKHS 315 C for a long time in order to attach a lateral sliding carriage. Thank you for your presentation.
Thats a very neat design... I like the idea, of using linear rails for the sliding table.. I also built a sliding table saw, some month ago.. (videos on my channel) ..anyway..well done my friend... Greets from germany..
Cool saw and video! It really helped me out. Although mine will be made of metal, I'm going to do something similar. I'm going to add a sliding extension to my table saw and was going to run the linear rails next to each other on a horizontal plane, but then I'd have to worry about getting them both exactly square with the table and blade. The way you did it, with the rails spaced apart vertically, takes all that worry out of it. Also, it makes adjusting the height of the slider to match the height of the table saw table much easier as well.
Brilliant work it’s a shame you haven’t dropped a video for a long time. I hope all is good thanks for bringing us along for the ride on this build it was great content
Interesting project. I see a lot of projects that use linear bearings...they are VERY expensive here and I have yet to see a project that justifies the expense...good luck with your project!
Great job, thumbs up. The vertical alignment of the rail plattform (sliding table) seems to be better than a horizontal one. I´m very interested in your thoughts on that, when you were figuring out the design. And, if we would try to build this, any points that we should pay special attention to? Thx
you can add hard metal in some point of adjustment screws, also use good quality plywood or hard wood not that wood type i've been used in this video it's not good enough. Hope you all could be build it much better than me, thanks for watching.
okay Tim, I hope you find an extreme solution for your new table saw, I would love you motor , it's absolutely good one, also hope your country and other overcome the corona virus, thanks for watching!
È un progetto che ho in mente da parecchio tempo. Però ho sempre avuto dubbi sulla tenuta dei cuscinetti. A distanza di tempo come si comportano i cuscinetti con la segatura? Sono ancora precisi?
Very nice build, great thinking and solution. I am considering using some of your ideas for an upgrade. May I ask roughly how much did the whole project cost? Cheers
Did you guys notice the test cut was not perfectly sitting flat with table, 2 things, one it causes tear out underneath and 2 small out of square angle since the board tilts, otherwise good project.
3/5 stars safety issues mostly. grinder guard, and use a push block when guiding long pieces of wood through circular saw blade. and riving knife. other than these few safety concerns, this sliding panel saw like will surely be of help on your future projects.
you can you this key words for search on ebay "16mm linear slide guide" , but ebay's price always higher than purchase in local, hope you can find it with in your local, thanks for watching my friend!
Hola buenas noches me gustó mucho su sierra de banco me podría compartirlos planos para realizar ese proyecto si tiene algún costo Melo hace saber y organizamos la forma de pago gracias
Olá gostei muito do seu projeto Como faço pra adquirir as medidas e principalmente esse material corredissas tanto do guia de corte como do carrinho ? Tenho uma serra circular quero fazer uma igual
Hi, I really liked your project How can I acquire as measures and especially this material slides from both the cutting guide and the trolley? I have a circular saw, I want to make a similar one
If that is on a hingde you should have gapped the platform for the sled and swing the the slide level to the table and come up with an attachment and ya got yourself a tennon slide jid
I had to turn the sound off, the provided background melodies was like listening to nails on a black board. Good design, I could make a few improvements to it though. This would take up too much space in my garage, so if a couple of quick release brackets added would make it easy to pull off and hang on the wall when not in use.
Working without a zero clearance insert as far as I know,is a VERY BIG,NO NO,i don't understand why this guy did not just cut a 45degree through his insert
I don't think in that case it was dangerous, I'd be more worried about too much tear-out.... that is why you want zero clearance as opposed to a stock insert with room on either side. Now if he was ripping a skinny piece that would be different
I admire your work on this. I plan to use it on my setup
Necessity is the mother of Creation.
You prove it Dear Master.
As far as it works to our requirements, it is as good as any of the models by Grizzly, Felder, Martin, SCM etc etc.
Improvements and tweakings will continue as you keep using.
Your work deserves appreciation and admiration.
So Love and Best Wishes with Regards from India.
Keep it up.
I'm constantly amazed at the inventiveness I see from some youtubers... You are no exception! 👏👏👏👏 Fantastic job! It's amazing what you can do with some linear bearings and plywood. Simply wonderful. I just love 💕 it. I really want to build a sliding table for my saw. At first I didn't understand why you went with the vertical configuration with the bearings and rails but I get it now. Great idea! 🍻
Thank you so much 😀
I love it!!! I've been watching all these saw videos I can find to copy one, and I really think this is the best one so far!!! I might modify it to fit a handheld planer. I like the slide, and it MUST be pretty rugged. I thought you were going to wear it out, but it held up!!! LOL Thank you for sharing your great idea!!!
Glad you like it!
I have been looking for such a good project for my Metabo TKHS 315 C for a long time in order to attach a lateral sliding carriage. Thank you for your presentation.
Thats a very neat design... I like the idea, of using linear rails for the sliding table.. I also built a sliding table saw, some month ago.. (videos on my channel) ..anyway..well done my friend... Greets from germany..
Cool saw and video! It really helped me out. Although mine will be made of metal, I'm going to do something similar. I'm going to add a sliding extension to my table saw and was going to run the linear rails next to each other on a horizontal plane, but then I'd have to worry about getting them both exactly square with the table and blade. The way you did it, with the rails spaced apart vertically, takes all that worry out of it. Also, it makes adjusting the height of the slider to match the height of the table saw table much easier as well.
appreciate your comment, thanks for watching my friend!
You are a genius !
Thank you so much for this sharing
Glad it was helpful!
Hi. Excellent job!! I wonder how the slider bearings have behaved as to wood dust.
No worries about wood dust, just clean it sometime, thanks for watching my friend!
Brilliant work it’s a shame you haven’t dropped a video for a long time. I hope all is good thanks for bringing us along for the ride on this build it was great content
thanks for watching my friend!
This is pretty awesome. Great job!
Glad you think so!
Very great project, but I can tell you highly recommend a Riving knife to the saw blade to Install.
thanks for your highly recommend, from this project i would have some ideas to build another one better , thanks for watching my friend!
i know Im kinda randomly asking but do anybody know of a good website to watch new movies online ?
@Gavin Titan i would suggest Flixzone. You can find it on google :)
@Cristian Johan Yea, have been using flixzone for months myself :D
@Cristian Johan thanks, I signed up and it seems like a nice service :D I appreciate it!!
Interesting project. I see a lot of projects that use linear bearings...they are VERY expensive here and I have yet to see a project that justifies the expense...good luck with your project!
Thank you very much!
Very nice machine
Very ingenious build. Well done.
Glad you like it!
great design, you should have made it bigger, but again great job
Estupendo agregado. Ayuda a los que tenemos poco espacio. Me gusta porque sólo soy aficionado y le veo buen servicio. Muchas gracias por compartir.
It's nice and awesome table saw, Rail with bearing would be good to slide, great job.
yup, linear slide guide always good for sliding purpose , thanks for watching my friend!
@@Solidworksmaster 👍👍
increible , gran trabajo , pienso hacer una como la de usted , gracias
thanks for compliment my friend!
Great job, thumbs up. The vertical alignment of the rail plattform (sliding table) seems to be better than a horizontal one. I´m very interested in your thoughts on that, when you were figuring out the design. And, if we would try to build this, any points that we should pay special attention to? Thx
you can add hard metal in some point of adjustment screws, also use good quality plywood or hard wood not that wood type i've been used in this video it's not good enough. Hope you all could be build it much better than me, thanks for watching.
@@Solidworksmaster Thx again.
Fantastic 😊
Thank you! Cheers!
Great job, but you need to put an antikick-back mechanism, and a blade guard too, to prevent accidents.
thanks for advise my friend!
Nice 👍
thanks for watching my friend!
Uau. A true Work of Art . Congratulations.
Thank you so much 😀
wow 😍 great job!
thanks for watching my friend!
Merci beaucoup pour la vidéo
thanks for watching my friend
Лайк 👍!
Nice build.
i think your channel need more subs to grow and you already have 1 subs form me, keep up your work, thanks for watching my friend!
Dear Solidworks Master, what bearing are u using for the fence? Do you have the number part? Thanks
it's Linear Bushing with Clamp Levers, and P/N is LHSSC16
@@Solidworksmaster Thanks
Gostei da pra fazer uma dessa pra mim?
hello, can you give information about the strength of the table rests, for example, does it slip when you cut it?
Cool, that's a nice one great job I build also a new table saw and search for a good solution for a sliding table
Cheers from FRANCE Tim
okay Tim, I hope you find an extreme solution for your new table saw, I would love you motor , it's absolutely good one, also hope your country and other overcome the corona virus, thanks for watching!
Olá
Muito bom Parabéns perfeito
thanks for comment my friend!
È un progetto che ho in mente da parecchio tempo. Però ho sempre avuto dubbi sulla tenuta dei cuscinetti. A distanza di tempo come si comportano i cuscinetti con la segatura? Sono ancora precisi?
Very nice. How wide of a piece will it crosscut on the sliding table?
over 60cm crosscut capactity, thanks for watching my friend!
Muito legal seu projeto.👍
Muito bom valeu gostei 👍
Parabéns meu amigo ficou show parabéns 😃😄👏👍👍👏👏👏
thanks for watching my friend!
excellent
Thank you! Cheers!
Muito legal o projeto,mas me parece que é pra canhoto
Спасибо за ссылки👍
thanks for watching my friend!
Projeto muito bem planejado e desenvolvido, parabéns, Ficou perfeito
Very nice build, great thinking and solution. I am considering using some of your ideas for an upgrade. May I ask roughly how much did the whole project cost? Cheers
it's cost me roughly ~120usd, thanks for watching my friend!
Execelente equipo faltarían los planos para que tu creación sea documentada, también podes colocar u router, pero donde venden esas guias cilindricas?
you could buy on Aliexpress for those rail, just type Linear rail SBR-16 for search, thanks for watching my friend!
Great project but you should have used better quality plywood. Your drill bits also seem dull.
Yes, you are right
how do you suppose a stainless ruler will work with magnets??
why not? :), thanks for watching my friend!
Você pode me dizer o tamanho dois trilhos q Você tá usando
I liked your project, I also want to make a homemade panel all, can you tell me the size of what you have put it. Thanks 😊
thanks for watching my friend!
Good job friends,
I like your project, I also want to make it's,
Can you tell me , making process available market .
Thanks making videos
How to Rip cut if it is blocked by the sliding fence?
Max journey of slinging fence is 35cm, so if need cut over i'll use guide track saw to cut, thanks for watching my friend!
@@Solidworksmaster okay, thanks.
Bravo
Did you guys notice the test cut was not perfectly sitting flat with table, 2 things, one it causes tear out underneath and 2 small out of square angle since the board tilts, otherwise good project.
thanks for watching my friend!
MUITO BOM MESMO!
Hello good afternoon. could you tell me where to buy the metal guides please
Qual a medidas dos trilhos você usou ?
Why does a piece in the crosscut sled not sit flat to the table?
bc plywood not perfect flat so they has gap between, thansk for watching my friend!
Thanks.
You're welcome
Отлично 👍👍👍.
Stoper itu namane apa mas...beli dimana☺️🙏
3/5 stars
safety issues mostly. grinder guard, and use a push block when guiding long pieces of wood through circular saw blade. and riving knife.
other than these few safety concerns, this sliding panel saw like will surely be of help on your future projects.
Why no one has made an entire bed that slides yet is beyond me
om penggarisnya kenapa gk pake yg penggaris stiker om jd simple.tp keren om
thanks for comment my friend!
Ga paham dia bang, keknya klo ngliat musik pengiringnya orang india neh. Tiap ada orang komen balesnya cma itu2 doang haha
Good
thanks for compliment my friend!
Donde comprar esos rieles o guías para la mesa
Sing komen wong Londo tok lurrr😀😀👍👍👍👍
Круто!
thanks for watching my friend!
Hello. The clip you made is soo good
Can you give me detailed specications, thanks.
thanks for compliment , cảm ơn bạn!
What brand your circular saw sir ??
That's Makita Circular saw my friend!
@@Solidworksmaster tx si much
juste wahouuuuuu chapeau bas ;)
thanks for comment my friend!
Great video! Would you mind giving me the link to order the guiding rails ?
you can you this key words for search on ebay "16mm linear slide guide" , but ebay's price always higher than purchase in local, hope you can find it with in your local, thanks for watching my friend!
Thank’ s à lot for your job wish you well
Hola saludos de Sucre Bolivia muy ingenioso y lindo trabajo interesante quisiera poder fabricar o copiar esa mesa circular
@@luisquevedol.5352 love your comment, thanks for watching my friend!
Hola buenas noches me gustó mucho su sierra de banco me podría compartirlos planos para realizar ese proyecto si tiene algún costo Melo hace saber y organizamos la forma de pago gracias
Maybe you could rotate the saw under the board to reverse the entry like a real table saw
thanks for comment my friend!
Please the materials ( fittings, aluminium rails etc) except wood where do you get from that link u should print below.
i've just update in description box , pls check it out, thanks for comment my friend!
I will make one sliding table saw for you for only material cost. you pay only for material ,shipping and delivery. I love to make one
А где подпилок ? Это не форматник , это циркулярка с кареткой .
What the first soundtrack play?
sorry late reply, that's "Distrion & Alex Skrindo - Entropy [NCS Release]", thanks for watching my friend!
Achei o projeto esselente eu gostaria de saber as medidas
thanks for watching my friend!
You could of used the slide rail at each end to mill the slots for your measures
Olá gostei muito do seu projeto
Como faço pra adquirir as medidas e principalmente esse material corredissas tanto do guia de corte como do carrinho ?
Tenho uma serra circular quero fazer uma igual
Hi, I really liked your project
How can I acquire as measures and especially this material slides from both the cutting guide and the trolley?
I have a circular saw, I want to make a similar one
If that is on a hingde you should have gapped the platform for the sled and swing the the slide level to the table and come up with an attachment and ya got yourself a tennon slide jid
If we want to contact you buy these readymade table from you how do we contact you.
मुझे लेना हे ये
ti conviene un pezzo di legno al termine della barra di alluminio. cosi se tocca la lama si consuma il legno e non l'alluminio
Hello what IS the coast of the project please ?
you mean the linear rail? pls go to aliexpress.com then type "linear rails SBR-16' for search, thanks for watching my friend!
I had to turn the sound off, the provided background melodies was like listening to nails on a black board. Good design, I could make a few improvements to it though. This would take up too much space in my garage, so if a couple of quick release brackets added would make it easy to pull off and hang on the wall when not in use.
quais sao as medidas?
How to cut 6'5"*21"
Is this for sale
Thanks for watching my friend! it's not for sale!
Essa eu gostaria de fazer tem às medidas
Mantap
Working without a zero clearance insert as far as I know,is a VERY BIG,NO NO,i don't understand why this guy did not just cut a 45degree through his insert
I don't think in that case it was dangerous, I'd be more worried about too much tear-out.... that is why you want zero clearance as opposed to a stock insert with room on either side. Now if he was ripping a skinny piece that would be different
👍👏
thanks for compliment my friend!
Bang bisa bantu beliin ya?
👍
apprecitated that like, thanks for watching my friend!
Ok👩🏾🚒
"Siiiip...
sir are you a filipino?
no , i'm from Viet Nam, thanks for watching my friend!
GAK BISA 1 LEMBAR MULTIPLEK
чет планку близка подвел пила не зацепит
I don't know why you give a lot comments, but thanks for watching my friend!
исполнение и идея отличиные. а вот качество фанеры ужасное
Yup, plywood quite bad quality, i will make another with alumium afterward , thanks for comment my friend!
hay
The problem with this all thing is that the saw is facing the wrong way ...
Hola 8