Do a lifesaver challenge at 100 yards where you stick like 20-30 lifesavers to a piece of cardboard and try to shoot through the center without breaking the candy
We appreciate you, and everyone else searching for accuracy...we are seniors, casual plinkers using cheap guns, cheap scopes, cheap bulk ammo, But, we do have Fun...accuracy is not our forté, with everything working against us, but y'all committed to accuracy do encourage us to relax, breathe better, squeeze the trigger better, and other things we can try to control...please carry on...
@TheRange7 I've recently seen online advertised as low as 4.3 cents a round, in brick and mortar stores around 6-7 cents the best we can find...we will buy any bulk .22 under 9.9 cents a round, but do prefer the cheapest, as more rounds Are more rounds, and we shoot a lot of it...we are not too uptight about brands, cci, federal, aguila, remington most of our range ammo, but s&b, norma, winchester also on hand...we do try to match ammo to the guns, as our autos are somewhat finicky, other guns don't really care what we feed them...sounds complicated, but works for us...6 cent .22, we love the stuff...! i suggest buy as much as you can, because invariably there will be another ammo shortage, and a big stash of bulk .22lr will keep you going to the range...think thousands of rounds of cheap bulk, if that feasible...
I can't speak for 2024, but in 2016 I bought a Remmington made Marlin XT-22. It could almost hold a 15 inch group at 25 yards. The store I bought it from (new) INSISTED it didn't have a BENT BARREL - "it's tapered, sir", but did check it themselves and referred to it as "dinnerplating" groups (and tumbling projectiles). 3 years later I got it back with a less "tapered" barrel (complete with tooling mark scratches on it), and now it can hold a 1" group at 25yds. My CZ-455 shoots 1/4" at 25yds with the same scope (and me as the same shooter).
Try changing the screw-in choke tube from cylinder-bore to full choke! That should tighten up your pattern, err 'group' size at least a little! (LOL) 15" @ 25 yds! WOW! That's BAD!
@@bobhamulak3646 Its not a shot gun ! Its a 22 rifle. Bent barrel ? I know some rifles have the ability to change out barrels but not sure about Remmington's.
V@@ag4allgood Yeah, I know it's not a shotgun! I was just kidding with the guy, who said he has a RIFLE that shoots a 15" group at 25 yards...kinda' like a shotgun pattern!!! Geez! Lighten up! I'm well aware he's talking about a .22 rifle. I just finished watching Josh's video!
Rife of your choice plus the Turd, 130-180yds, KYL, Rifle of your choice (8rds), one shot each target. All makeup shots must be made with the Turd(8 rds). (Bonus: 50yds, KYL, 22LR semi-auto pistol, 10rd)
Byron Ferguson, Bob Munden, and Tom Knapp are THE Impossible Shots. I learned a lot from those fellas and really miss them all. I think Byron is still at it, but we have lost the other 2.
Thanks for doing this video it was fun. We know what a good marksman you are, but it is fun to take something that is not up to the task at hand and make it work.
I can re-barrel the Springfield 2020. I've done a few of them. More then a significant improvement down range. Not that it's necessarily cost effective to do.
Some days the stars and planets align just perfectly! Took your advice and bought the Ergo grip from XLR Industries, got it on the new rifle, took it to the range and. Well let's just say the stars and planets did not align!😅 But I am digging the grip, almost exactly what I figured it would be! Thanks for the advice!❤❤❤
My OCD was saying "why is that support rod not an equal amount on each side" I was going to suggest the Savage FV-SR at 100y on Necco Wafers. At least it's a 1" diameter target. If you can make the shot, I will do what I can to repeat it with my FV-SR
I’ve been incredibly disappointed with my Bergara BMR, not worse than the Springfield 2020 but I can’t seem to shoot groups less than .7” consistently with any ammo.
Nice video. It would be interesting to see how it would score when shot at the A-51 target. After 20 shots for record you would have a good idea of expected accuracy.
So the MSRP on that rifle is $439, I'd like to see a comparison using 2-3 other bone stock rifles in the same price range (give or take $50) compared to this Springfield using the same ammo in this video.
@@JamesS.254 every barrel likes different ammo or lots. Comparing a rifle to another rifle on the same ammo is not a great method for a fair comparison
@@PursuitofAccuracy then how about a side by side using this rifle and at least 2 other rifles in the same price range, all 3 rifles get to use their best shooting ammo? All 3 rifles bone stock, scope obviously allowed. Your opinion is valued, but what are you basing your opinion on when comparing this rifle? I don’t think a comparison from this rifle to a $900 and up rifle are going to compare in the slightest, let alone the tricked out rifles we love watching you shoot. $500 max on the rifles no mods scope of your choice, and whatever ammo you deem best for each rifle.
@@JamesS.254 im actually not comparing it to anything. I treat every rifle individually based on its performance vs price. For its price the savages will absolutely murder it on accuracy. I use and test rifles based on what interests me so all my rifles are typically competition rifles. I only bought this rifle initially to review it and save people money so they wouldnt buy it believing it was something it wasnt. The amount of negativity ive gotten by buying a rifle only to prevent people from wasting their money has been wild.
I would expect Springfield will fix the accuracy issues. Also the poor interoperability with the Ruger 10/22 magazine. Maybe these two issues are related. One of the accuracy limitations raised for the Ruger Precision Rimfire is its use of the 10//2 magazine.
im curious of the Savage B22 Precision with that same test. Ive been wanting to get my hands on one to just try, but cant seem to find them at any local shops.
Hi, Thanks for a great channel!😊 A couple of points about your website which you might want to take up with your Web person: 1 The contact link on the menu doesn't take you to a contact form. 2 The donate link shows various credit cards but if you click it the only way to pay is with PayPal. I'd like to make a donation but I never use PayPal.😐
It’s really unfortunate the Waypoint Rimfire is such a flop, considering the centerfire series are so great. You would think Springfield would pull it’s head out of it’s ass and improve the rimfire by now.
Ruger Precision Rifle 50 & 100, CCI Mini Mag 40g target …. 10 rounds at 50 and 10 rounds at 100 on the IBS Rimfire targets Gives us beginners a good reference to work from
Hey Josh, I've recently found your channel and you're content is super entertaining. I'm looking into getting a CZ Varmint in the next week and I've seen you've done several videos on it and I wanted to know what would be your most accurate build for it? What have you found to be the best barrel (i plan on getting a mdt chassis, and a timney trigger and an arken optic)
@@PursuitofAccuracy thanks for you reply brother, and for someone new to this as I am what is “l3i”. And would you say the muller works more expensive price to the lilja is worth it or no?
@@kennyblackston1282 the mcr mullerworks is a 800ish blank. The lilja falls in around 550 ish and L3i just released new cz prefits that will be just under 500. L3i is a company thats been making accessories for cz etc. just now getting into making barrels and a new action that will release in a few months
Oh heavens, I was just kidding about the Springfield 2020 in my original comment. Can’t believe you were able to get through that KYL in a mag. Congrats on that accomplishment! Have you bore scoped that turd to figure out why it has such garbage accuracy? I remember when they first came out and a friend thought I should get one because I was into rimfire stuff. Still glad I never got one.
....like the fine little Howa 1100 - 22LR bolt rifle, the action is great, just needs a match barrel to replace the crap it comes with & naturally need to be pillared & bedded which I do with EVERYTHING except chassis', I only bed them with RTV-silicone everytime I separate, then initially torque to only 50%-70% torque value for 24hr. drying time,...then to 100% torque value for final.....works for me.
You should rebarrel the Ruger rimfire precision with quality barrel and see what happens?🤷♂️ I’m sure the tolerances won’t allow it to shoot amazing but it would be cool to see what a 400 dollar rimfire can do 😂
I'm glass you shot the Springfield 2020 because it kept me from buying it. I have a couple of 10/22's are Frankensteins that I modified that shoot better than the Springfield. I've seen the same results on other channels. Just not an accurate gun which is a shame as I love Springfield 1911's.
Funny how things evolve only the high school rifle team had model 52s or Mossberg trainers. Take it from an old guy,Be glad anytime you can go out and make a gun go bang. I'm trying to make up a 541 into a precision rifle. Pretty picky on ammo barrel looks absolutely horrible.
Well at least you didn't literally shoot that rifle like Paul Harrell did to a .22 Winchester rifle as it leaned against a tree after it's front sight fell of while testing.....funniest thing I ever watched. LOL!....pretty sure it was a Winchester.
I don't own that rifle, but like all your other " High end " guns, how about a new barrel ???? maybe just maybe that's the missing link to having some consistency.... If they want to sell them they better shoot ...............................thanks for sharing !!
I happen to be very happy with my Springfield 2020 using a Hawke 4-12 x 40 scope. Sorry to see that you and all your commenters below love to hate this rifle. Have a nice day!
It's really a shame because the rifle isn't bad looking..... What's wrong with that thing? Does it have a bad barrel that might be able to be switched out?
It has a Sporter chamber designed to take anything and everything including Stingers. If you look at almost all more accurate .22s they say specifically NOT to shoot Stingers in them because the chamber is too short for the longer Stinger and some other high velocity 22s. Take that same gun with a Bentz or Short Bentz chamber in it, Ill bet it would shoot quite well.
@@davidleatham296 thank you 👍, interesting! I have to believe they regret this now......lots of bad press. I actually like the stock compared to what's out there😊
He cleaned the target, it’s clear there’s nothing wrong with the rifle. 1 inch at 50 yards with match ammo and a competent shooter. if it don’t shoot it’s you or the ammo.
@@PursuitofAccuracy you keep saying something is wrong with the rifle…. but never articulate what it is ?……there’s a million factors that can make your group bigger or smaller. You swapped all that ammo and said it’s the rifle! swap the barrel and prove it .
@@alephnull9653 the barrel is almost certainly the issue. No gunsmith I know is gonna touch that rifle. If there is a drop in replacement id check it out
You got to season the barrel, take a shot and clean it, take a shot and clean it, repeat until you get 5,000 rounds through it. JK brah ! Thanks for letting me know not to get that rifle.
Suck you got a bad one, I've had luck with 4 in a row after the first one was a lemon. All shoot CCI SV at 1/2" at 50. Not phenomenal but great for a $400 rifle.
A shooting buddy of mine just bought this Springfield rifle in the wood stocked version..he,s waiting on some Talley rings for it.. and he is gonna put a Leupold 4 .5 x 14 scope on it to test it out at 50 yds...I,ll report back.. he does alot of bitching when he has a gun thats inaccurate.. ha
Comparing with your other guns that only the receivers and bolts are OEM, and all other parts are from third party... this is a virgin that has the OEM barrel , trigger and stock, no bipods ...Dump the gun in trash bin? That's a show!
@@yaudtube compared to every other gun i own they shot circles around the springfield 2020 even stock. I bought that rifle knowing it was a bad rifle only to do the review and save people money. And here now its only on the channel again because it was the most liked comment on the last impossible shots series.
Split a playing card and walk it out from 50 to 180? Your gun and ammo choice.
Oo thats a good one. Hope it gets upvoted
@@ryanh4347 24 upvotes. I love you guys!!
Do a lifesaver challenge at 100 yards where you stick like 20-30 lifesavers to a piece of cardboard and try to shoot through the center without breaking the candy
We appreciate you, and everyone else searching for accuracy...we are seniors, casual plinkers using cheap guns, cheap scopes, cheap bulk ammo, But, we do have Fun...accuracy is not our forté, with everything working against us, but y'all committed to accuracy do encourage us to relax, breathe better, squeeze the trigger better, and other things we can try to control...please carry on...
@TheRange7 I've recently seen online advertised as low as 4.3 cents a round, in brick and mortar stores around 6-7 cents the best we can find...we will buy any bulk .22 under 9.9 cents a round, but do prefer the cheapest, as more rounds Are more rounds, and we shoot a lot of it...we are not too uptight about brands, cci, federal, aguila, remington most of our range ammo, but s&b, norma, winchester also on hand...we do try to match ammo to the guns, as our autos are somewhat finicky, other guns don't really care what we feed them...sounds complicated, but works for us...6 cent .22, we love the stuff...! i suggest buy as much as you can, because invariably there will be another ammo shortage, and a big stash of bulk .22lr will keep you going to the range...think thousands of rounds of cheap bulk, if that feasible...
I can't speak for 2024, but in 2016 I bought a Remmington made Marlin XT-22. It could almost hold a 15 inch group at 25 yards. The store I bought it from (new) INSISTED it didn't have a BENT BARREL - "it's tapered, sir", but did check it themselves and referred to it as "dinnerplating" groups (and tumbling projectiles). 3 years later I got it back with a less "tapered" barrel (complete with tooling mark scratches on it), and now it can hold a 1" group at 25yds. My CZ-455 shoots 1/4" at 25yds with the same scope (and me as the same shooter).
😄 Very funny, thank you, you've made my day with that.👍🏻
CZ makes some of the most accurate rifles made today.
Try changing the screw-in choke tube from cylinder-bore to full choke! That should tighten up your pattern, err 'group' size at least a little! (LOL)
15" @ 25 yds! WOW! That's BAD!
@@bobhamulak3646 Its not a shot gun ! Its a 22 rifle. Bent barrel ? I know some rifles have the ability to change out barrels but not sure about Remmington's.
V@@ag4allgood Yeah, I know it's not a shotgun! I was just kidding with the guy, who said he has a RIFLE that shoots a 15" group at 25 yards...kinda' like a shotgun pattern!!! Geez! Lighten up!
I'm well aware he's talking about a .22 rifle. I just finished watching Josh's video!
Use your best rifle to run a 50 yard kyl with your choice of the worst ammo. I'd like to see how it does.
I laughed soooooooo hard on this one!!! Thanks for the chuckle!!
Rife of your choice plus the Turd, 130-180yds, KYL, Rifle of your choice (8rds), one shot each target. All makeup shots must be made with the Turd(8 rds). (Bonus: 50yds, KYL, 22LR semi-auto pistol, 10rd)
Byron Ferguson, Bob Munden, and Tom Knapp are THE Impossible Shots. I learned a lot from those fellas and really miss them all. I think Byron is still at it, but we have lost the other 2.
Well done Josh thought it had ya beat for a second, cheers Yogi ✌️
The ending was the best 🤣
@@markdorman426 thanks Mark, good to see people still have a sense of humor 😂😂😂
I like your flooded range...impacts are much more dramatic. You should keep it 'moist'. LOL
Thanks for doing this video it was fun. We know what a good marksman you are, but it is fun to take something that is not up to the task at hand and make it work.
Same exact yardage and target with an open sight rifle
Do you have a video testing the top 3 different rounds out of your CZ457?
I can re-barrel the Springfield 2020. I've done a few of them. More then a significant improvement down range.
Not that it's necessarily cost effective to do.
Please oh please get that ARKEN off there before going in the trash LOL.
@@Dayattherange lmao i did
My Idea, set a leaf blower up to blow straight up and let a small ball float in the airstream. Distance so that flight time makes it interesting.
Cleaning the KYL with the 2020 you better go buy a powerball ticket brotha!!
We used to try lighting kitchen matches at 25 yards with peep sights
It seems a shame to throw it away. Maybe you can give it to that obnoxious cyclops guy.
@@ldever3 lmfao good idea
@John-Nel 😂
Happy Saturday!
Some days the stars and planets align just perfectly!
Took your advice and bought the Ergo grip from XLR Industries, got it on the new rifle, took it to the range and. Well let's just say the stars and planets did not align!😅
But I am digging the grip, almost exactly what I figured it would be! Thanks for the advice!❤❤❤
Turd of a gun. Priceless.
My OCD was saying "why is that support rod not an equal amount on each side" I was going to suggest the Savage FV-SR at 100y on Necco Wafers. At least it's a 1" diameter target. If you can make the shot, I will do what I can to repeat it with my FV-SR
I’ve been incredibly disappointed with my Bergara BMR, not worse than the Springfield 2020 but I can’t seem to shoot groups less than .7” consistently with any ammo.
Shoot through 0.25" hole at 100 yards
How's the savage mk2 fv stack up as an entry-level bull barrel rifle?
For the $$ savages are hard to beat. Not taking $$ into consideration they dont compete with cz 457’s generally speaking
Thanks for the vid!!
Some kid out there would love to have that gun ! 😊
You did that rifle wrong -- it cleared the KYL. I want to see you shoot that rifle at long range now ;-)
Nice video. It would be interesting to see how it would score when shot at the A-51 target. After 20 shots for record you would have a good idea of expected accuracy.
The end! EPIC!! 😂😅
@@CountryRimfire appreciate ya!! 😂
So the MSRP on that rifle is $439, I'd like to see a comparison using 2-3 other bone stock rifles in the same price range (give or take $50) compared to this Springfield using the same ammo in this video.
@@JamesS.254 every barrel likes different ammo or lots. Comparing a rifle to another rifle on the same ammo is not a great method for a fair comparison
@@PursuitofAccuracythen find the ammo it likes before making the video. Mine shoots great.
@@PursuitofAccuracy then how about a side by side using this rifle and at least 2 other rifles in the same price range, all 3 rifles get to use their best shooting ammo? All 3 rifles bone stock, scope obviously allowed.
Your opinion is valued, but what are you basing your opinion on when comparing this rifle? I don’t think a comparison from this rifle to a $900 and up rifle are going to compare in the slightest, let alone the tricked out rifles we love watching you shoot.
$500 max on the rifles no mods scope of your choice, and whatever ammo you deem best for each rifle.
@@JamesS.254 im actually not comparing it to anything. I treat every rifle individually based on its performance vs price. For its price the savages will absolutely murder it on accuracy.
I use and test rifles based on what interests me so all my rifles are typically competition rifles.
I only bought this rifle initially to review it and save people money so they wouldnt buy it believing it was something it wasnt.
The amount of negativity ive gotten by buying a rifle only to prevent people from wasting their money has been wild.
@@User3eighty4 yours is one of a very few. Ive tested a ton of ammo in this rifle. It didnt shoot anything even close to moa consistently
I would expect Springfield will fix the accuracy issues. Also the poor interoperability with the Ruger 10/22 magazine. Maybe these two issues are related. One of the accuracy limitations raised for the Ruger Precision Rimfire is its use of the 10//2 magazine.
Can you do keystone 722 ….. 180 yards
im curious of the Savage B22 Precision with that same test. Ive been wanting to get my hands on one to just try, but cant seem to find them at any local shops.
I'd like to see you try the 50 yard iron sight challenge that Long Rifle has on his channel.
5X 22lr casings in 10 shots at 150 yards with the 457.
It’s a decent looking rifle and you mentioned the action is ok… can the barrel be swapped out?
Haha 😂 it's OK straight out hate, we will take it, I was planning to get one! Now I will have a doubt 😅
I found some SK long rifle match that shoots quite well in my Bergara B14R how do I go about getting the same lot number?
@@markhuffman5011 typically a lot of any ammo is sold to 1 place. Check where you got it from, if they dont have any left it may just be gone already
Light a match stick at 100y in 15rnds.. Vudoo or CZ. Any ammo. Go now!
What target is this and where can I get one?
Dm targets kyl. Google will get ya there
I couldn’t get better than 1.5in at 50
How about KYL with the 457 and armscor or Aguila ammo
Hi,
Thanks for a great channel!😊
A couple of points about your website which you might want to take up with your Web person:
1 The contact link on the menu doesn't take you to a contact form.
2 The donate link shows various credit cards but if you click it the only way to pay is with PayPal. I'd like to make a donation but I never use PayPal.😐
@@dalehill6127 i will get on that. Appreciate the feedback. The website has gone ignored for a while for sure
Just think of it as community service. You 'get' to suffer so we don't have to!
Tell us how you really feel about the Springfield 2020 😂
This is how i feel about my christensen. I sent it back to them. Probably won't get it back until next year. Tempted to tell them to just keep it.
It’s really unfortunate the Waypoint Rimfire is such a flop, considering the centerfire series are so great. You would think Springfield would pull it’s head out of it’s ass and improve the rimfire by now.
Ruger Precision Rifle 50 & 100, CCI Mini Mag 40g target …. 10 rounds at 50 and 10 rounds at 100 on the IBS Rimfire targets
Gives us beginners a good reference to work from
Hey Josh, I've recently found your channel and you're content is super entertaining. I'm looking into getting a CZ Varmint in the next week and I've seen you've done several videos on it and I wanted to know what would be your most accurate build for it? What have you found to be the best barrel (i plan on getting a mdt chassis, and a timney trigger and an arken optic)
@@kennyblackston1282 best barrel ive had for a cz is the mcr mullerworks with the l3i (video soon) and lilja closely trailing the mcr barrel
@@PursuitofAccuracy thanks for you reply brother, and for someone new to this as I am what is “l3i”. And would you say the muller works more expensive price to the lilja is worth it or no?
@@kennyblackston1282 the mcr mullerworks is a 800ish blank. The lilja falls in around 550 ish and L3i just released new cz prefits that will be just under 500. L3i is a company thats been making accessories for cz etc. just now getting into making barrels and a new action that will release in a few months
I would sure like to lap and re-crown that bbl. to see if it can come around.
KnifeMaker/Retired after over 47+ years in the Craft
I’d love to see you put a barrel on that rifle to see if that is the only issue.
Challenge deserts precision to work some magic on it
Josh is it possible for you to do a review on the Anschuts 1727 F.
Oh heavens, I was just kidding about the Springfield 2020 in my original comment. Can’t believe you were able to get through that KYL in a mag. Congrats on that accomplishment!
Have you bore scoped that turd to figure out why it has such garbage accuracy?
I remember when they first came out and a friend thought I should get one because I was into rimfire stuff. Still glad I never got one.
@@austinkroe lol not yet, i should though. It got the most likes so thats what i rolled with 😂😂
Ruger precision rim fire with trybe optic scope at 50yds
Ah, no Hammerili force B1?
....like the fine little Howa 1100 - 22LR bolt rifle, the action is great, just needs a match barrel to replace the crap it comes with & naturally need to be pillared & bedded which I do with EVERYTHING except chassis', I only bed them with RTV-silicone everytime I separate, then initially torque to only 50%-70% torque value for 24hr. drying time,...then to 100% torque value for final.....works for me.
I would send it to Kenny at DPG let him see if he can work some magic on it That's the only hope for it
@@timothytrexler1896 hes got like a year backlog. I dont think hed want that thing in his shop lol
Probably worse than my brothers 100$ marlin 22lr
You should rebarrel the Ruger rimfire precision with quality barrel and see what happens?🤷♂️ I’m sure the tolerances won’t allow it to shoot amazing but it would be cool to see what a 400 dollar rimfire can do 😂
How about a little green army man at say 180?
@@daveneal456 that would be fun.
Re-barrel it with a take off barrel? We have a few people here that can slug a barrel and maybe tell what’s going on.
I'm glass you shot the Springfield 2020 because it kept me from buying it. I have a couple of 10/22's are Frankensteins that I modified that shoot better than the Springfield. I've seen the same results on other channels. Just not an accurate gun which is a shame as I love Springfield 1911's.
Funny how things evolve only the high school rifle team had model 52s or Mossberg trainers. Take it from an old guy,Be glad anytime you can go out and make a gun go bang. I'm trying to make up a 541 into a precision rifle. Pretty picky on ammo barrel looks absolutely horrible.
when the kyl broke that tells ya the gun is bad luck😆, and throws it in the trash 🤣
Have you ever figured out whether 1:14 performs any better than 1/16
Lets see you try this turd. Bear Creek Arsenal BC 201. 10-22 clone. Bull barrel, match chamber, 11 degree target crown.
I have this one twice. Must be payback for making you shoot that dog of a rifle!
That it is 😂😂😂
horizontal cotton at 150 yds your choice of rifle all the best 2 mags by the way
50 yards KYL off hand. 10 shots
Well at least you didn't literally shoot that rifle like Paul Harrell did to a .22 Winchester rifle as it leaned against a tree after it's front sight fell of while testing.....funniest thing I ever watched. LOL!....pretty sure it was a Winchester.
I don't own that rifle, but like all your other " High end " guns, how about a new barrel ???? maybe just maybe that's the missing link to having some consistency.... If they want to sell them they better shoot ...............................thanks for sharing !!
See if you can shoot through a 22 barrel at 50 yards
Actually did that at 90 something yards a year or so ago in missouri
Shooting off a bag I noticed
@@dennishoffman3531 no arca rail on the stock and no shot i waste one on that rifle lol
I happen to be very happy with my Springfield 2020 using a Hawke 4-12 x 40 scope. Sorry to see that you and all your commenters below love to hate this rifle.
Have a nice day!
@@MarvinTurner-oc4ml your among the lucky few that have had good results. Maybe 1 in 30 i hear have had acceptable accuracy out of them
"can it be 50%", yes, and one of your misses did actually touch it. barely, but it wiggled. pull that turd back out of the trash, and send it to me!!!
@@leftyo9589 lol yeah i also saw it when i edited the video
KYL at 25 yards, your choice of gun. Standing with sling.
@@vernonarmstrong3738 id have to erect a big backstop for that video lol
It's really a shame because the rifle isn't bad looking..... What's wrong with that thing? Does it have a bad barrel that might be able to be switched out?
It has a Sporter chamber designed to take anything and everything including Stingers. If you look at almost all more accurate .22s they say specifically NOT to shoot Stingers in them because the chamber is too short for the longer Stinger and some other high velocity 22s. Take that same gun with a Bentz or Short Bentz chamber in it, Ill bet it would shoot quite well.
@@davidleatham296 thank you 👍, interesting! I have to believe they regret this now......lots of bad press.
I actually like the stock compared to what's out there😊
Agreed, it’s a turd! 😂
He cleaned the target, it’s clear there’s nothing wrong with the rifle. 1 inch at 50 yards with match ammo and a competent shooter. if it don’t shoot it’s you or the ammo.
@@alephnull9653 considering my other rifles shoot .2 and .3 at 50 yards i would say there is something wrong with 1”
@@PursuitofAccuracy you keep saying something is wrong with the rifle…. but never articulate what it is ?……there’s a million factors that can make your group bigger or smaller. You swapped all that ammo and said it’s the rifle! swap the barrel and prove it .
@@alephnull9653 the barrel is almost certainly the issue. No gunsmith I know is gonna touch that rifle. If there is a drop in replacement id check it out
@John-Nel in my opinion the action is the rifle. Its like changing the transmission in a mustang, its still a mustang
Should have used bulk Winchester white box or bulk federal. 😈
I never miss with Winchester, it never feeds is all
It’s not the arrows it’s the Indian
You got to season the barrel, take a shot and clean it, take a shot and clean it, repeat until you get 5,000 rounds through it. JK brah ! Thanks for letting me know not to get that rifle.
@@stevec442 lmao you had me going 😂😂😂
Suck you got a bad one, I've had luck with 4 in a row after the first one was a lemon. All shoot CCI SV at 1/2" at 50. Not phenomenal but great for a $400 rifle.
The Springfield and the Christensen Arms Ranger both are terrible!!!!!
Pull it out of the trash and give away the Springfield 2020 Rimfire to a random subscriber since you hate it so much. 🙂👍🏻
@@markcmann the trash can was a joke. Giving away that rifle is like giving a friend a cold sore, not cool 😂😂
@John-Nel i agree. Ive given away rifles and scopes before but usually to youth shooters who are starting in nrl22 or prs.
Well…If you would use handloads it would shoot much better… duh!
@@fairviewprecision lmao
Seems to me your blaming the gun for your shooting hmmm.
@@billystephens9255 i can tell by this comment your new around here lol.
there not the worst try a wembley an scott could hit a barn door at 6feet horriable rifle
I will 2nd that opinion. The gun is built well. It just shoots like crap. Come on, Springfield, you can do better than this!
Lol😂😅😂😂😂😂😂
A shooting buddy of mine just bought this Springfield rifle in the wood stocked version..he,s waiting on some Talley rings for it.. and he is gonna put a Leupold 4 .5 x 14 scope on it to test it out at 50 yds...I,ll report back.. he does alot of bitching when he has a gun thats inaccurate.. ha
Comparing with your other guns that only the receivers and bolts are OEM, and all other parts are from third party... this is a virgin that has the OEM barrel , trigger and stock, no bipods ...Dump the gun in trash bin? That's a show!
@@yaudtube compared to every other gun i own they shot circles around the springfield 2020 even stock.
I bought that rifle knowing it was a bad rifle only to do the review and save people money.
And here now its only on the channel again because it was the most liked comment on the last impossible shots series.