There's been so much going on lately that I didn't do the best job documenting the 1.5JZ stuff, but it was actually quite simple! Hyped to get this thing back on track! LZMFG.com
Got to get your priorities for self isolation. He needs content. He is lucky that he works on cars. If you purely drive, vlog and review like sttrraaadman or shmee. And you don’t have a workshop. You are stuffed.
Have you considered building an engine room for big boost? I’m sure he’d love a clean dedicated space to build you’re engines and transmissions. Plus it would make for better build content.
I was thinking sorta the same after I saw him with the mask on assembling the engine, what about the engine! I kinda did the opposite and built a workshop to keep grit out of my garage, off my cars and out of my engine builds.
Got to get your priorities for self isolation. He needs content. He is lucky that he works on cars. If you purely drive, vlog and review like sttrraaadman or shmee. And you don’t have a workshop. You are stuffed.
Its getting really dangerous now due to virus but I dont know..I started working on my old engines #stayingarage...all parts already on shelfs. Dont need to see anybody at all. It's pain to stay isollated from people but its nessesary.
Adam: I need to smoke test the intake manifold Shulman: *runs over and vapes into the intake* Adam: So I smoke tested my intake manifold and I think it’s cracked in the back
Sharpest Shed In Tool yea Adam kinda kicked his dick in bringing in the new dude seems like big boost gets all the bs jobs now instead of what he likes doing aka all the fab work etc
Yes! Loving these recent videos! The current crew has been awesome to watch. Collette, Navo, and Yohan being around has been sick to watch. Albertos videos on the rotary has been sick too! Keep up the amazing vids Adam!
Hey, one thing I noticed was your exhaust does not have a turn down on it. You might want to look into doing that bc with that amount of heat pointing at your gas tank, aside from not being the safest thing, it will heat up that fuel pretty quick.
I'm just gonna post this before even watching the video. I am so stoked that you are continuing to focus on the e36 a little, it's a super rad car and such a good platform!
That intake removed the air to water cooler aswell though, so you have to run traditional front mount and intercooler pipes. and it has its own non port fuel system which would need blanking(or remove the mega squirt Adam has already). It’s an option, but it comes with a hell of a lot more work.
I seem to recall hearing a lot of "you're not gonna break the manifold, it'll be stronger than you'll ever need" all over the internet.. plastic shit from BMW tends to... you know... break. Papadakis' manifold was a wise choice, he chose to not trust BMW and make his own.. now it already paid off before the car is done.
Hey bois, just wanted to express my gratitude for all the content you pump out. definately made me smile a lot the last few years :) So thank you for all the shenanigans Much love from germany
I'm so pumped to see how it behaves on dyno, as well as how much better it does on the track this is my first look at a 1.5 and never even heard of one till your videos. I feel like that problem you were having with too much grip will be minuscule now that it has a bit more displacement. Those 123's are gonna melt now!
We have a newly rebuilt engine. Rev it to the max! Miss Hartford wondering why she is on the 4th? Guess why. I know i am from a world where we had to rev up for about an hour or so (85 to 105 revs) because of thermal heat but your engine will live longer and perform better by braking it in. Like the way you are doing things.
seems like big boost is about to dip out... I couldn’t blame him after bringing in the new dude and getting stripped from doing all his favorite work aka fab work etc
Papadadaskis Racing did a 3D printed manifold. Not sure if its available to the public for purchase yet, but im sure it would be in the near future. Could be an option
Pretty sure paapdakis racing made a custom intake manifold for the b58 but they also got rid of the internal air to water cooler and switched to a front mounted air to air IC
Adam panic buying 2jz's
prob some good deals atm
BOOT nope
Can never be too prepared man. Never.
1 of the 2jz's will be the spare for the S15. and wasn't there another new car coming?
Got to get your priorities for self isolation. He needs content. He is lucky that he works on cars. If you purely drive, vlog and review like sttrraaadman or shmee. And you don’t have a workshop. You are stuffed.
Have you considered building an engine room for big boost? I’m sure he’d love a clean dedicated space to build you’re engines and transmissions. Plus it would make for better build content.
His and Adams
I was thinking sorta the same after I saw him with the mask on assembling the engine, what about the engine! I kinda did the opposite and built a workshop to keep grit out of my garage, off my cars and out of my engine builds.
He mentioned a while back that they're in the process of getting a bigger shop. Maybe they'll have room for something like that there.
big boost needs a proper boost room
Wasn't Adam trying to get a bigger shop? If so, you may get that room you wish for.
who else remembers the hurricane prep vids lmao
Yasss Hurry up. More jz content
Remember when he was at university and was dating Nicole
I remember when they put the miata inside the living room to prank some bloke for whatever he was doing
I 'member
Anyone else remember when the channel was lz bmx and he made webisodes
Due to Corona Virus Crisis
Rest of the People : Buying toilet paper
Adam :Buy all Floridas 1JZ & 2JZ's 😂
Got to get your priorities for self isolation. He needs content. He is lucky that he works on cars. If you purely drive, vlog and review like sttrraaadman or shmee. And you don’t have a workshop. You are stuffed.
Its getting really dangerous now due to virus but I dont know..I started working on my old engines #stayingarage...all parts already on shelfs. Dont need to see anybody at all. It's pain to stay isollated from people but its nessesary.
trading them toilet paper for 2j's and 1j's. *
Well, consider it a stimulus package! He buys all the 1 and 2J’s and a lot of people get extra money to make it through!
TheMrEngineering that’s a good one low key me tho buying hella car parts
Adam: I need to smoke test the intake manifold
Shulman: *runs over and vapes into the intake*
Adam: So I smoke tested my intake manifold and I think it’s cracked in the back
Dane Austin funniest shit ever lol
$m0nk
you just made my day
U have a BMW with a Toyota engine and a Toyota with a BMW engine lmao
Man BMW and Toyota has made the worlds best straight sixes, who can complain
They really should join forces forever
Jake Dynasty Clearly the B58 didn't make the "best"-list
Jake Dynasty Nissan would like a word
I just came into the comments to say the same thing haha
Adam “Blew the welds on the intake” LZ. Gotta love it💯
Damn Alberto looks tired af he needs to take a nap.
SnickleFrits Pickle that dude is about to find a new job for sure
Sharpest Shed In Tool yea Adam kinda kicked his dick in bringing in the new dude seems like big boost gets all the bs jobs now instead of what he likes doing aka all the fab work etc
All that coke being sniffed
He’s a spicish they love to work
@@slingshot1304 lmao as if you guys know what is going on 😂 he has so many cars and they all need shit done. Stop talking shit
Alberto got the accent of Puerto Rican that can fix a car with duct tape, a rubber band, and a medala beer can. Book runs 10’s dale puñeta
Eso si pai, tu tienes razon
Me meo 🤣🤣🤣🤣
This notification was a true blessing to day 6 of my quarantine
Jesse Lucas bruh, am so bored at home. I think am going crazy.
My dog killed my xbox. Laptop is junk. Stuck playing PubG mobile to kill the time. Fml
Iam actually surviving day 16 of my quarantine and i definetly went crazy a long time ago. Greetings from Slovakia
Lucky for me..........................💊💊💊
@@ae86hachi Later buy the dog a hump teddy
Alberto's knowledge still blows my mind.
Yes! Loving these recent videos! The current crew has been awesome to watch. Collette, Navo, and Yohan being around has been sick to watch. Albertos videos on the rotary has been sick too! Keep up the amazing vids Adam!
Adam is like that one friend who talks about things you dont understand but you still hang with because hes a chill dude.
LZ's crew is amazing. The turn around time on these builds are so fast yet still done to professional standards.
Adam: it's how i want it, its a perfect daily how it is.
also Adam: might need a bigger turbo
2 "yay" Z
- Alberto
too yay see
wun yay see
2 Jay C
2jayc
17:40 just damn! Alberto and Johan's work is work of art! Love it!
Imma need some guitar outros here soon to pass this quarantine time my guy!
You read it. Like the damn comment!
Alberto is a hard worker man, every video he's always getting shit done!
I’ve been watching since the first video and I’ll keep watching you till I can’t
20 min never feel like 20 min when I'm watching your vids👏🔥
Can we give love to the boys for building an engine so quickly.
Hey, one thing I noticed was your exhaust does not have a turn down on it. You might want to look into doing that bc with that amount of heat pointing at your gas tank, aside from not being the safest thing, it will heat up that fuel pretty quick.
ok but when are we gonna replace the tail light bulb? lol
Lol seriously, that has been driving me nuts.
It's the brake light haha needs to fix the switch
Just E36 things
@@Alexx__xD if thats what he needed to fix none of the brake lights would work. He only has one brake light that doesnt work.
Thank you for the raw sounds, my heart is full of joy 😊
Where's Colette? :(
I was asking the same question
Same
She's attending a Kelly Osborne look-a-like contest ...
Earnest Bunbury awwwwwww hahahahahahaha
Um back in California where she lives...
I’m not watching your videos if Collet isn’t in them 😂😂😂
simp.
✌
SIMMPP
I´m stocked on this 1.5JZ! Sounds crazy, spools fast, and feels like it is so healthy! This e36 is gonna a lot of Ws in Comps
Gonna get*** a lot of W’s*** in competitions***
Stoked u mean? Lol
I'm glad I'm not the only one who takes pictures before working on something unfamiliar.
I'm just gonna post this before even watching the video. I am so stoked that you are continuing to focus on the e36 a little, it's a super rad car and such a good platform!
Alberto doing a 2j build ??? YASSS! ON MY WAY TO WATCH!
STICKERS ARE UPSIDE DOWN!! Its supposed to made a "T" with the valve stem!
RACE JIMMY IN HIS RED BMW
Yessss
Been a dream of mine to 1 or 2j e36 for some years now too. The inspiration is good man she’s a ripper
The only you tuber I will drop everything for just to watch the videos 💯 keep posting bro...
That Renault R5 Turbo is crazy!!! An original one, stock, could cost around 100k dollars today...Love it
She's alive! Love the 1.5JZ
Papadakis Racing: billet intake !!!!!☝️
Grüße aus Österreich (AUSTRIA) 🇦🇹
He doesn't sell them, he built a custom one off piece. However, for the right price I'm sure he would replicate it.
That intake removed the air to water cooler aswell though, so you have to run traditional front mount and intercooler pipes. and it has its own non port fuel system which would need blanking(or remove the mega squirt Adam has already).
It’s an option, but it comes with a hell of a lot more work.
Or you construct a billet intake with air/water cooler inside 🤔
Or 1:1 Original... No plastic ✖️➡️all billet✔️😍
I am just so blown away how fast you were able to get the 1.5jz going. It’s crazy how fast your turn around time is on builds
4:50 Yamaha valves... that is some cool JDM-ness
Alberto's face in the outro had me dead lmao
Rylie K these guys can’t keep a secret around here sheesh
This rebuilt JZ sound sooo goood . Can't wait to see it on the track
Sounds even better! Def wanna hear this on the track 👌🏼
Nah
@@gptsiteuser yah
Damn, Adam with the TE stickers upside down
You're gonna love the 1.5JZ though. They sound the business. Probably my favorite engine.
I seem to recall hearing a lot of "you're not gonna break the manifold, it'll be stronger than you'll ever need" all over the internet.. plastic shit from BMW tends to... you know... break.
Papadakis' manifold was a wise choice, he chose to not trust BMW and make his own.. now it already paid off before the car is done.
Its made of plastics so it breaks before a ring landing. Prolly saved the motor.
Josh Riley big brain
Josh Riley Supra 2j swap coming soon
Thought old ell zed would have made the first 3JZ !!! 🇬🇧🤙🏼🐾
I love watching your video adam since 3 yrs. one of your fan from 🇵🇭
Pinoy pride!
2jz e36 is literally my dream car. I have a rusted out e36 with a blown head gasket right now 😅
the blue rims look sick on the supra
My boy!!! Just in time 🔥🔥 you have saved my night 🖤🖤🤏
Blitz 03s on the white chaser!!
Those TE’s are fire on the Supra
Hey bois, just wanted to express my gratitude for all the content you pump out. definately made me smile a lot the last few years :) So thank you for all the shenanigans
Much love from germany
"2jc" "1jc"
wun yay see, too yay see
Foozefighter 😂😂
YES!!!!! Adam finally got a modern haircut!
I'm so pumped to see how it behaves on dyno, as well as how much better it does on the track this is my first look at a 1.5 and never even heard of one till your videos. I feel like that problem you were having with too much grip will be minuscule now that it has a bit more displacement. Those 123's are gonna melt now!
350Z can indeed take a good beating. Beast of a car dude
We have a newly rebuilt engine. Rev it to the max! Miss Hartford wondering why she is on the 4th? Guess why. I know i am from a world where we had to rev up for about an hour or so (85 to 105 revs) because of thermal heat but your engine will live longer and perform better by braking it in. Like the way you are doing things.
Y’all gotta fix that taillight😂😂
Thanks for clearing that up. I really thought there was a benefit with the 1.5 thinking the 1JZ head flowed better or something. Cool.
20:17 damn that sound is beautiful 😍
hes grinding on stuff in the same room as an open engine?
If you go back to the 1JZ start up video right after, you can really hear the difference. Sounds way beefier and more sick
seems like big boost is about to dip out... I couldn’t blame him after bringing in the new dude and getting stripped from doing all his favorite work aka fab work etc
Nottttt
Great choice with the 1.5
Drift daddy Adam back at it again with the jz LzeDerino
Adam: doesn’t Greddy make an aftermarket intake manifold for the Supra? Their sema car had one on
its probably still pre production.
its probably still pre production.
Yooooo the 1.5J is sick
So not only did Adam look like O'Connor turning on the nos in the video he also pulled a classic O'Connor danger to manifold 😂
Looking good, damn your shop set up and crew are on point!
Sounds quite a bit deeper, so awesome, keep up the awesome content as always
Accidentally had comments on youtube said 1jz exhaust was "music" couldn't agree more haha
you should consider drilling pilot holes in the suspension arm nuts and lockwire them so they wont loosen
11:00 Roberto is wearing glasses inside what a savage
Kinda sad you didn't go V8, but I've been waiting forever for you to do a 1.5JZ. I approve. 👌🏻
Adams trim tho 🔥🔥🔥
You should mark the bolts with a colored sharpy so you can see easily if they brake lose.
last time I was this early Adam had a wife.
Related vids always showing her in the thumbnail lol
This had me rolling🤣🤣🤣
Damn you took it there 😯
Was i supposed to laugh
That's pretty insensitive my guy, kinda offensive
Papadadaskis Racing did a 3D printed manifold. Not sure if its available to the public for purchase yet, but im sure it would be in the near future. Could be an option
Nobody:
Alberto:2jc and 1jc😂😂😂
Jimmy and Adam need to meet up with their E36 as soon as it's done
Get an engine room Adam. It would help Alberto get more organized thus building better engines
7:24 tech flex my man.....tech flex and flocked dash
Can’t remember the last time I saw the Z worked on, that’s how reliable it is 🤣
I fuckin love DEI produsts! they make little injector insulators that work great for cars that vapor lock sometimes
They do sound quiet till u hit boost. Thats why they were in family cars here.
I reeeeally want to know Alberto’s secret 😂
Bet sharon is pregnant. 😉
Please keep up with the videos man loving them I specially need them now cause my country New Zealand is in lockdown now...
Hello from quarentine from TE-JAS....Giddy Up
You can 3d metal print the intake manifold like Papadakisracing for the SUPRA 2020
I got so happy when this video popped up. Been so bored lately! On day two here in Ohio on lock down because of this virus.
Hey Adam, its time to bring your 335i out again!
Wow that sounds great, as always
That e36 is my dream car brotha
Alberto looks like he’s losing weight 💪🏻💪🏻
Maybe lockwire the locknuts on the arms of the Z? That's the idea of the holes in the nuts.
Anyone think it’s wierd everyone’s in masks and Adams full send vlogging 😂😏
Keep and eye out for a 12 injector manifold for the a90
Pretty sure paapdakis racing made a custom intake manifold for the b58 but they also got rid of the internal air to water cooler and switched to a front mounted air to air IC