As you noted it's all in the individuals tastes as to light coverage, or full coverage. The lower piece ot that hipower, us the frame. Keep up the good work. Nicely executed!
Was showing a friend your videos. I said you look 20. And do amazing work. Of course I'm old, and everyone looks somewhere between 18-25, because I have zero reference, and I like to treat everyone as adults. Mutual respect and shi.
I have been engraving some for about 6 years. You are much better than I at this point. I am starting to do a bit more but my drawing sucks. I like how you have figured out to draw on your firearms and engrave a small part at a time. Keep it up.
Great work bro! I’ve been engraving for a few years on jewelry, I use the Steven Lindsay airgraver and it works great for small and details, I always see the grs tools being used In videos, thanks for sharing your work with us💫💫hopefully I’m motivated to make my videos now💫💫
Always wanted to try a Steve Lindsay airgraver, I think the different ways of engraving are cool. Don't be afraid to make your own videos, the more engravers out there the better!
@@jwsahm6703 hopefully I’ll have a video up soon! I’ve been looking at the grs 901 but I’m not too sure how all the air connections of it sets up are and if it will connect, do those handpieces have the pistons inside of them as well? I hate to buy all the stuff that I have for my Steve Lindsay if I could just get the grs handpiece to work with what I have? Thanks for responding bro!
@@EstablishedLowriders When it comes to compatibility of both systems I know nothing. The handpieces do have the piston on the inside, but a larger machine like a GRS GraverSmith applies the pulses to the handpiece
awesome videos what tools do you use I can free hand any thing I have a raw slide I would love to try this on .ant help would be great thanks love you videos
Oh my god… that is freaking AWESOME.. great job!!!!! What size graver did you use for the outline… and was that a pneumatic one for the stipling? What size.. I have been wanting to do this for so long but Im a little confused on what sizes to begin with. I also want to it by hand but I have a feeling mine won’t be anywhere as beautiful as this. I’ll just practice on some scrap metal.
Practicing on scrap metal is your friend! Can't mess up what's already scrap lol. I use a 120 degree v point for the line work. And yea I use a pneumatic for the stippling as well as all the rest of the lines, it's a grs GraverSmith machine with a magnum handpiece
Awesome work man, was the slide stripped to bare metal before you started? If so how would you go about refinishing/painting the raised portion without covering the engraved portion? For instance if you wanted the raised portion to be white but the engroaved portion to be the black you used in the video? Thanks for the upload your awesome!!
If you wanted the raised portion to be painted but not the engraving you could paint it first and engrave through the paint (or whatever finish it has), though this is not always recommended. To make the engraving black but not the metal I just rub black enamel into it and wipe away the excess. Also the gun was stainless to begin with so no prior prepping was done. Hope that answers it, thanks for watching :D
I set the heel by eye so I don't know what the exact angle is, but around 15 degrees is a good start. The size of the heel is also important. Too small and the graver will just dig in as the heel is not big enough to ride on, and you will have to lower your hand just to keep it from digging in further. Too big and you will have to raise your hand high just to start a line. I use carbide gravers, but a high speed steel (HSS) graver is useful to practice graver geometry as they are much easier to shape and grind then carbide (at the cost of durability)
I have not done one yet, but I am very interested to see how it would go. No plans yet, but hopefully in the future I will try and post a video about it
How about your videos are very good friend. I am Mexican and I would like to learn how to make designs. Could you help me get the tool to start practicing. Greetings
What's parts exactly? If you mean EVERYTHING I used to engrave the gun... well... it's a hefty list. I plan on making a video talking about my whole set up in the future though
Uhhhhh let's see.. Grs low profile ball vise, a lazy susan for a turn table. 120 degree tungsten carbide v point graver, .2mm and .4mm flat graver, tungsten carbide stipple tool. grs graversmith pneumatic engraver, AmScope microscope, and a clean, dry, compressed air systems
![อยู่ได้แล้ว - LIPTA feat. Mirrr [OFFICIAL MV]](http://i.ytimg.com/vi/-9-hpntNym4/mqdefault.jpg)
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
You DEF understood the assignment. Sweet! Great work on this.
If you 2x’s the speed it sounds like some 90’s techno music like you’re in blade or some type sci-fi matrix movie 😂. Love the work dude keep it up!
As you noted it's all in the individuals tastes as to light coverage, or full coverage. The lower piece ot that hipower, us the frame. Keep up the good work. Nicely executed!
So therapeutic to watch. If only i didnt have beef sausages for fingers..
Very good video. Thank You!
Very good, keep it up!
Was showing a friend your videos. I said you look 20. And do amazing work. Of course I'm old, and everyone looks somewhere between 18-25, because I have zero reference, and I like to treat everyone as adults. Mutual respect and shi.
Respect, my guy! Thanks for sharing the video, I hope you both enjoy the videos! :D
"This little part, that thing, never seen that before- that little thing, whatever that is."
This definitely made me laugh.
Awesome inspiration 👍
I think you're very good, and I think your design is very graceful and flows beautifully.
:D Getting better every day too!
So nice…….. I love it!
Cool stuff is this art!!!!
I have been engraving some for about 6 years. You are much better than I at this point. I am starting to do a bit more but my drawing sucks. I like how you have figured out to draw on your firearms and engrave a small part at a time. Keep it up.
Quite a complement! Drawing is the hardest part for me, trying to imitate others drawings and also practicing all the time helped me a lot. Cheers!
Great work, do u have any fcb or Instagram account
Looks beautiful brother. That part is called a frame
Amazing man good stuff👍
sweeeeeet bro getting better each time keep it up
Very nice. You can find numerous disassembly/assembly DVDs to learn about your firearm which will help tremendously.
I need to start at learning to draw filigree. Looks really fun. Great job btw!
Amazing
Well that is simply bad ass-I’ve always wanted to learn how to do that
Man I would love to learn how to engrave and checker. Great work!
Me to ☝️
can’t wait to have a go❤
Fantastic work! I would love for you to do my colt 1911, but not sure if you are taking on other people's stuff?
That is awesome work. What do you charge and would do some work on one of my slides?
Great work bro! I’ve been engraving for a few years on jewelry, I use the Steven Lindsay airgraver and it works great for small and details, I always see the grs tools being used In videos, thanks for sharing your work with us💫💫hopefully I’m motivated to make my videos now💫💫
Always wanted to try a Steve Lindsay airgraver, I think the different ways of engraving are cool. Don't be afraid to make your own videos, the more engravers out there the better!
@@jwsahm6703 hopefully I’ll have a video up soon! I’ve been looking at the grs 901 but I’m not too sure how all the air connections of it sets up are and if it will connect, do those handpieces have the pistons inside of them as well? I hate to buy all the stuff that I have for my Steve Lindsay if I could just get the grs handpiece to work with what I have? Thanks for responding bro!
@@jwsahm6703 I’m in North Carolina, where are you located if you don’t mind me asking?
@@EstablishedLowriders I'm in good ol Missouri!
@@EstablishedLowriders When it comes to compatibility of both systems I know nothing. The handpieces do have the piston on the inside, but a larger machine like a GRS GraverSmith applies the pulses to the handpiece
awesome videos what tools do you use I can free hand any thing I have a raw slide I would love to try this on .ant help would be great thanks love you videos
Nice.
Oh my god… that is freaking AWESOME.. great job!!!!!
What size graver did you use for the outline… and was that a pneumatic one for the stipling? What size.. I have been wanting to do this for so long but Im a little confused on what sizes to begin with. I also want to it by hand but I have a feeling mine won’t be anywhere as beautiful as this. I’ll just practice on some scrap metal.
Practicing on scrap metal is your friend! Can't mess up what's already scrap lol. I use a 120 degree v point for the line work. And yea I use a pneumatic for the stippling as well as all the rest of the lines, it's a grs GraverSmith machine with a magnum handpiece
Good work man. I’d like to get a gun engraved for my son in the Army. How can I get a hold of you if your still doing this?
Awesome work man, was the slide stripped to bare metal before you started? If so how would you go about refinishing/painting the raised portion without covering the engraved portion? For instance if you wanted the raised portion to be white but the engroaved portion to be the black you used in the video? Thanks for the upload your awesome!!
If you wanted the raised portion to be painted but not the engraving you could paint it first and engrave through the paint (or whatever finish it has), though this is not always recommended. To make the engraving black but not the metal I just rub black enamel into it and wipe away the excess. Also the gun was stainless to begin with so no prior prepping was done. Hope that answers it, thanks for watching :D
I'd hope and assume he's joking about not knowing what the frame/lower, safety selector and mag release button are... LMAO
Where did you learn how to engrave?
Awesome job!!! What size graver is that? Also , what are you hiding gun in to spin?
I use a ball vise to hold the gun, and the vise is on a turntable to allow me to center it below a microscope
Nice work! I have a question. What are your graver heel angles and width? sometimes I doubt if I get mine right, they dive in the metal really easy.
I set the heel by eye so I don't know what the exact angle is, but around 15 degrees is a good start. The size of the heel is also important. Too small and the graver will just dig in as the heel is not big enough to ride on, and you will have to lower your hand just to keep it from digging in further. Too big and you will have to raise your hand high just to start a line.
I use carbide gravers, but a high speed steel (HSS) graver is useful to practice graver geometry as they are much easier to shape and grind then carbide (at the cost of durability)
Thanks! Thought I was doing something wrong in the sharpening, maybe it’s my crappy turntable that vibrates that’s causing the cmax gravers to break.
How long have you been engraving? Work looks good.
Coming up on two years! I like to think of it as my imaginary associates degree in engraving lol
@@jwsahm6703 Two years! You're doing great for only two years of experience!
@@jwsahm6703 ns. You're light years ahead of the rest of us rubes
Have you ever done engravings with slides that have black coating (ex. Glock slide/M&P)? If so how was your experience?
I have not done one yet, but I am very interested to see how it would go. No plans yet, but hopefully in the future I will try and post a video about it
What is the paint that you use to fill out the engravings called?
Rustoleum Enamel.
What kind of gravers are you using?
C max tungsten carbide from GRS. I use a .2mm flat for background, and a 120 degree v point for line work
How about your videos are very good friend. I am Mexican and I would like to learn how to make designs. Could you help me get the tool to start practicing. Greetings
Is that push engraving?
Can anyone help me in finding these hand engraving tools , please 🙏
I wonder if he’s taking on clients
Just an fyi. The handle is called. "The frame "
It's Literally called the pistol lower
Is that ink?
Rustoleum protective enamel, flat black
I am not an engraver. I wonder if you are using an air engraver or a hammer or just pushing it over the metal
I think he's using a grs machine
I use a grs pneumatic air engraving machine, it's basically an air powered hammer
Lindsay engraving??
If you mean the Lindsay handpiece, no I use a grs magnum handpiece. Always wondered what the lindsay handpiece was like to use though
Where are you based out of??
Missouri!
Thanks for showing me!
𝕠𝕦𝕥𝕤𝕥𝕒𝕟𝕕𝕚𝕟𝕘 𝕨𝕠𝕣𝕜
Frame
can I get a parts list off you please I'd like to try this on mine
What's parts exactly? If you mean EVERYTHING I used to engrave the gun... well... it's a hefty list. I plan on making a video talking about my whole set up in the future though
@@jwsahm6703 The rotating table and a liner.. to start easiest stimpling method
@@jwsahm6703 Not sure terms.. Just know I know I can do this... Seems as in the engraving runs on what air?
@@jwsahm6703 or is it all manual tap
Uhhhhh let's see.. Grs low profile ball vise, a lazy susan for a turn table. 120 degree tungsten carbide v point graver, .2mm and .4mm flat graver, tungsten carbide stipple tool. grs graversmith pneumatic engraver, AmScope microscope, and a clean, dry, compressed air systems
Puede aser la mía