Wow...this was VERY helpful...I just bought a used car that someone installed the Pioneer system in, and I was getting VERY frustrated! This cleared up some things...thanks!
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
I just got a a DMH-1500NEX but I plugged my phone in and nothing came up as far as carplay. Unless I need to find something on the stereo to make it appear?
I recommend to: 1. Install the latest version of iOS on your phone. 2. Restart your phone. 3. Press the DMH-1500NEX microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer DMH-1500NEX on the hard key panel to the far right. 4. Try a different USB cable. Just because a cable will charge the phone does not mean it will work with Apple CarPlay. Don't expect a $1 gas station cable to work. Get a good quality cable. 5. The USB extension cable must be plugged directly into the back of the Pioneer DMH-1500NEX receiver in order for CarPlay to work. 6. Are you plugging your phone into the USB extension cable that came with the receiver? Or are you trying to plug into an existing OEM USB port? It must be plugged directly into the back of the receiver. You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
@@pioneerelectronics I was trying to plug it into the existing port. Thank you for the response. But how do I run my cord from the back of my stereo into my car?
@@RushGirnty19 The Pioneer DMH-1500NEX includes a USB extension in the box. You can see it in this Unboxing Video from Pioneer: th-cam.com/video/I1XFyRiTZKc/w-d-xo.html I recommend to check the vehicle's glove box or center console, or other areas for the USB extension cable. It should have been installed when the vehicle was taken apart to install the new in-dash receiver. If you can't find it, contact your installer and ask where he put it. If the USB extension cable was not installed, ask to have it installed.
AVH-1330NEX, connected to speakers via RCAs (vehicle has existing amp/sub) in Standard mode. Guidance volume has always been too low to be usable (even at full volume for guidance volume, regardless if Apple Maps, Google Maps, or Waze). This has been a problem through multiple iPhones and iOS versions for a few years. Latest firmware on the radio. No issues with music, Siri, message volume. I've tried playing with all of the radio audio settings to no avail (and there are A LOT). You can hear it (out of front speakers only), but just too low. Thoughts/ideas?
Thank you for the detailed question. Please answer a few more questions to clarify things. When you say the guidance volume is low, are you saying the music does not mute when you hear a guidance command? Or the music is muted or attenuated, and the guidance command volume is still too low? Are you using Maestro RR in this installation? I read that you've installed the latest firmware for the receiver. I'd like to confirm that you have firmware version 18.39 installed. Have you tried to press the receiver's microprocessor reset button? You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-1330NEX at the top of the hard key panel beside eject. Next, I recommend to do a Restore Settings. You can see this demonstrated in this Pioneer How To video: th-cam.com/video/OMJ5yJ6157g/w-d-xo.html Please note: When you do a restore settings operation, you'll need to select Standard Mode again when the receiver restarts. You can find a full playlist of How To videos about Pioneer AVH-1330NEX here: th-cam.com/video/xvp2910DqQs/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics Just updated a couple days ago to v8.39 (believe you have an extra "1" in your reference. I do have an interface for steering wheel controls - 95% sure it was a Maestro as I recall having to program it (I did this in late 2017 - my kids' car that I now have back again). If I set mute to ON vs. ATT it helps slightly as the music goes totally off, but not really usable. Also, phone call volume isn’t really loud enough to use while driving either. Soooooo. Full reset. CarPlay music can get plenty loud! Guidance is waaaay too quiet. Phone calls although usable with the car off, is too quiet to be useful while driving. Not nearly as quiet as guidance, but far from ever being called loud.
@@cz9h3d Thank you for your detailed response. I think I understand now, and we can solve the issue. I believe this has directly to do with the receiver's --REAR-- RCA outputs in standard mode, being used to send signal to the external amp and subwoofer. Pioneer in-dash receivers output Bluetooth Phone Call audio and navigation instructions to the FRONT speaker outputs and FRONT RCA outputs only. Not to the rear RCA outputs, and not to the rear speaker outputs. The Bluetooth Audio source, or music played from your phone, will play through all outputs, both front and rear. Your in-dash receiver may be installed incorrectly. There is an easy way to test it. Change to the HD Radio Source and tune in any strong radio station. Next, using the receiver's Fader control, fade the audio output all the way to the front. You can see how to use the fader control in this video: th-cam.com/video/Z86fQryoRVk/w-d-xo.html Can you hear music? . If you fade the system all the way to the front and can not hear music, or the music volume is very low, that may mean the in-dash receiver’s FRONT audio outputs are not connected in your system. You may have the receiver's rear RCA outputs connected and operating front speakers in your vehicle. You can see the front / rear / subwoofer RCA outputs on the receiver in this video: th-cam.com/video/adbrQ6hUzwQ/w-d-xo.html If you change the RCA output connection to the receiver's Front RCA Output, you'll be able to hear phone calls, and navigation instructions, etc... You can find a full playlist of How To videos about Pioneer AVH-1330NEX here: th-cam.com/video/xvp2910DqQs/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics Front speaker volumes user fader are super low on HD Radio source - BUT, rears are quite loud when moving to either left or right rear. Fader adjustment is sending signal to the appropriate in-car speaker. If I have RCA's reversed, would I not see the opposite - fader to front speaker would result in sound from the rear?? Or is my OEM amp in the equation helping to create this condition? I'll swap the RCA's just for the heck of it and see what I get!! Note: adjusting the speaker inputs, +db fronts, -db rears, to get music properly distributed or even front heavy - still doesn't get enough volume for guidance...BUT the fader operates the correct speakers, and all are plenty loud for music. ;)
@@cz9h3d Please clarify What you mean here: "Front speaker volumes user fader are super low on HD Radio source" If the receiver is faded all the way to the front and the volume is low on the front speakers, this may be an issue with the OEM amp. It's possible the amp is using only one input and sending that signal to all speakers? Maybe how the gain is set, or how the OEM amp filters out certain frequencies.
I recommend to Restart your iPhone. Plug your iPhone into USB Port 1. Make sure Apple CarPlay is switched on in your iPhone Settings. Change the Cable you are using. Press the microprocessor reset button located on the hard key panel on the in-dash receiver. You'll need a paperclip or some other small point to reset the microprocessor. You can find more videos about Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html You can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
My AVH1330NEX was connecting to my iphone 13 with no issues for over two years. All of a sudden the phone connects to the car, charges the phone, but only works on bluetooth mode. Switching it to the USB/iPod input results in nothing. Even on the home screen of the radio, the app CarPlay still shows up but its greyed out. Not sure what to do with this.
1. Please be sure to install the latest iOS updates for your phone. 2. After installing phone update, please be sure to restart your phone. 3. I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the micro processor reset button. You can find the microprocessor reset button on Pioneer AVH-1330NEX at the top of the hard key panel next to eject. If you press the microprocessor reset button and this behavior persists, I recommend to try a different iPhone cable. Cables can and do fail. Don't get a $1 gas station cable. Get a good quality cable and try again. AVH-1330NEX was manufactured back in 2017. There have been several firmware updates for this product. Please be sure to install the latest firmware for your Pioneer AVH-1330NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-1330NEX#downloads You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
Does Siri need to be enabled on your iPhone in order for the receiver to utilize Siri or does the receiver have its own independent Siri? In other words if I disable Siri on my iphone will it be disabled on the receiver as well?
On the connected iPhone, Siri needs to be switched on for voice activation to work in Apple CarPlay. If you don't like using Siri, much of Apple CarPlay can be operated by touching the screen and never using voice commands. You can find more videos about Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
Are you a distributor in the Allison park area I live in the south hills and would like to buy one from a store not online and possibly check out some other units for my vehicles
I recommend Best Buy locations in your area near Century 3 or Bethel Park. Pioneer car audio products are available in store and they offer installation. Several Pioneer in-dash receivers that work with Apple CarPlay should be available including the Pioneer AVH-W4500NEX for wireless CarPlay seen here: th-cam.com/video/-JidsPPVKnA/w-d-xo.html and you can see how to make the wireless connection to Apple CarPlay here: th-cam.com/video/MkWffv3vB6Q/w-d-xo.html you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
Im getting a light static and/or hum when plugging in the phone. It sounds similar to when my phone volume was too when using an auxiliary connection .
Please clarify your question. What is the model number of your Pioneer in-dash receiver? Are you hearing the sound when you plug in the phone through USB? Is the sound only when using Apple CarPlay or on other sources such as AM/FM radio? Do you hear the sound when using a USB flash drive? Have you tried to a new or different USB cable? You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
I can’t get my CarPlay to work. My usb is hooked up and working correctly I assume because it will read my phone and charge. But it doesn’t allow CarPlay to work. I have a 8 plus and a 4200 nex
The Pioneer AVH-4200NEX has 2 USB ports on the back. Apple CarPlay will work with USB Port One only. It does not work on USB port 2. You can see it here: th-cam.com/video/g5juaKNXr90/w-d-xo.html Please watch the video for the proper Smart Phone Setup settings. Apple CarPlay must be switched on. Please be sure to have the latest firmware installed on the AVH-4200NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-4200NEX#downloads You can find more videos about Pioneer AVH-4200NEX here: th-cam.com/video/vNHEvsZ5JKc/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
What is the model number of your Pioneer in-dash receiver? Some Pioneer receivers are capable of Wireless Apple CarPlay and Wireless Android Auto. And some require a USB connection. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@stacyedwards6851 Please take a few moments to read this full response. I'll try to clarify the difference between Apple CarPlay wireless, and using the in-dash receiver for wireless Bluetooth Phone calls and wireless streaming audio. The Pioneer DMH-C5500NEX connects with Apple CarPlay and Android Auto with a wired connection through USB. I'm not aware of a way to connect DMH-C5500NEX to Apple CarPlay wireless. Just to be clear, the Apple CarPlay connection for DMH-C5500NEX must be through USB. However, if you want to connect your phone through Bluetooth for hands free phone calls and wireless streaming audio only, that can be done through Bluetooth without using a wired connection. This is not Apple CarPlay wireless. It's just hands free phone calls, and streaming audio through Bluetooth and it does not require a wired connection. You can learn how to pair your iPhone through Bluetooth in this How To video from Pioneer: th-cam.com/video/i78qojRRJUk/w-d-xo.html You can learn how to play some music from your phone through Bluetooth in this How To video from Pioneer: th-cam.com/video/TUaLxpVLg5g/w-d-xo.html You can learn how to make and receiver phone calls through Bluetooth in this How To video from Pioneer: th-cam.com/video/SZlRTKxYSDk/w-d-xo.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: th-cam.com/video/xvp2910DqQs/w-d-xo.html If you are looking for Wireless Apple CarPlay, you'll need a different receiver from Pioneer. Please consider the Pioneer DMH-WT8600NEX seen here: th-cam.com/video/QrvNkGgRo7E/w-d-xo.html Or the Pioneer DMH-W4660NEX seen here: th-cam.com/video/B2TTfJUD-es/w-d-xo.html You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
According to my iPhone under "Do Not Disturb" and then "Do Not Disturb While Driving" > Learn More... "If your car supports CarPlay and your iPhone is connected, Do Not Disturb while driving isn't activated. Instead, CarPlay uses your car's built-in display to help you stay focused on the road." You can find more videos from Pioneer here: th-cam.com/users/pioneerelectronics
Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? What are you trying to do with the receiver? Are you using Apple CarPlay? If you are using Apple CarPlay are you playing music from selected app through CarPlay? You can find more videos on Pioneer's TH-cam Channel here; th-cam.com/users/pioneerelectronics
@@tvcenerherm The Pioneer AVH-2500NEX works with Apple CarPlay with a wired connection through USB. When a compatible iPhone is plugged in through USB, I recommend to use Apple CarPlay to make hands free phone calls, and to play music from your phone through many different apps available through Apple CarPlay. It's normal operation for Apple CarPlay to disable Bluetooth on the in-dash receiver. If you want to use Bluetooth, I recommend to unplug the phone from the in-dash receiver. You can learn more about using Apple CarPlay in this How To video from Pioneer: th-cam.com/video/_P3_aPDLK2E/w-d-xo.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html Please be sure to install the latest firmware for your Pioneer AVH-2500NEX. you can find it here: www.pioneerelectronics.com/PUSA/Car/SiriusXM/AVH-2500NEX#downloads and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Yes. When plugged in through USB it will charge your phone. You can find more videos about Pioneer AVH-2330NEX in this Pioneer You Tube Playlist: th-cam.com/video/xvp2910DqQs/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
You did not mention what Pioneer in-dash receiver model you have. I recommend a few steps. 1. Restart your phone. 2. I recommend to press the Microprocessor Reset Button. You’ll need a paperclip or some other small point to press the microprocessor Reset button. I can't tell you where the button is, cause I don't know what receiver you have. 3. Install the latest firmware for your Pioneer in-dash receiver. I can't give you a link to the latest firmware, cause I don't know what receiver you have. 4. Use the cable that came with your phone and plug directly into the back of the receiver. If that does not work, try a different cable. Not all phone cables are the same. A cheap cable may charge your phone but it will not allow data to pass through. 5. If you get it to work with the cable plugged directly into the receiver, then try the extension cable. You can find more How To videos about Pioneer NEX receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Please be sure to install the latest firmware for your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2500NEX#downloads
No, the Pioneer AVH-X490BS does not support Apple CarPlay. If you're looking for an Apple CarPlay receiver, Pioneer has many options. Please consider the Pioneer DMH-W4660NEX seen here: th-cam.com/video/B2TTfJUD-es/w-d-xo.html You can find a full playlist of How To videos from Pioneer with very similar operation to AVH-X490BS here: th-cam.com/video/C6h7IJ7wpmc/w-d-xo.html Please be sure to have the latest firmware installed for your Pioneer AVH-X490BS. You can find it here: www.pioneerelectronics.com/PUSA/Car/DVD+Receivers/AVH-X490BS?tab=firmware#downloads You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
I recommend to press the microprocessor reset button on the Pioneer AVH-2500NEX. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the hard key panel to the right of the eject button. Also, please restart your phone. Please install the latest firmware for your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2500NEX#downloads What phone are you using? What version of iOS? Did you use the cable that came with your phone to connect to the in-dash receiver? A good quality cable is required. Just because the cable will charge the phone does not mean it will carry data to the in-dash receiver. You can find more How To videos with very similar operation to Pioneer AVH-2500NEX in this Pioneer You Tube Playlist: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
im getting this message on my Pioneer AVH-3500NEX in my car can someone please help me fix this usb was disconnected for device protection. do not re-insert this usd memory into the unit. please restart the unit.
I recommend to try a different USB cable to connect to your phone or USB flash drive. Or to use a different flash drive. I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button behind the detachable face on the AVH-3500NEX as seen in this How To video from Pioneer: th-cam.com/video/ibWu0o2hW24/w-d-xo.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html You can find more videos on Pioneer's TH-cam Channel here; th-cam.com/users/pioneerelectronics
If you are using iOS 13 or newer on your iPhone, you have the option of Google Maps, or Waze, or Apple maps for navigation. You can see it here: th-cam.com/video/4JHAHPfSbzw/w-d-xo.html You can learn more about Pioneer NEX in-dash receivers in this video: th-cam.com/video/Y-lL_eIB3Ug/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
My AVH2440 doesn’t launch CarPlay automatically when I connect my phone , I have to go the main screen and tap the green CarPlay icon ... it did auto launch the first times I did it .. not anymore ... any help ?
Usually, this depends on what was on the in-dash receiver screen when the phone was disconnected. In most cases, the in-dash receiver will return to CarPlay if you had CarPlay on the screen ( not the radio, or BT Audio on screen) when the phone was disconnected. You can find more videos about Pioneer AVH-2330NEX here: th-cam.com/video/xvp2910DqQs/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
Yes. Spotify shows album art. You can see it here: th-cam.com/video/pnhO83Vz4XQ/w-d-xo.html You can see more videos of Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html
There is a keyboard available for Apple Maps. The parking brake must be engaged to use the keyboard. You can find more videos about Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html
Here is a video showing how to connect your iPhone to a Pioneer NEX in-dash receiver through Bluetooth: th-cam.com/video/i78qojRRJUk/w-d-xo.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receives here: th-cam.com/video/TUaLxpVLg5g/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Can you use the Google Maps app in Apple CarPlay? No. However, if you choose to use the Waze Navigation app, it uses Google Maps, that changes the answer is yes you can use Google Maps. You can find more videos about Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
Here is a video about Android Auto: th-cam.com/video/kpKYks-17gM/w-d-xo.html All Pioneer NEX in-dash receivers are compatible with Apple CarPlay. Some are also compatible with Android Auto. You can see more here: th-cam.com/video/yoPE7eF84-0/w-d-xo.html You can find more videos from Pioneer here: th-cam.com/users/pioneerelectronics
The Pioneer AVH-1400NEX works with Apple CarPlay nearly exactly as shown in the above video. This video was made before the the Pioneer AVH-1400NEX existed. You can find a full playlist of How To videos from Pioneer about NEX receivers with nearly identical operation to AVH-1400NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
Yes, take a look at this video for audio adjustments. All audio adjustments happen while you are playing music. th-cam.com/video/Z86fQryoRVk/w-d-xo.html
You can find more videos about Apple CarPlay on your Pioneer NEX in-dash receiver here: th-cam.com/video/4JHAHPfSbzw/w-d-xo.html You can find a full playlist of How To videos from Pioneer about AVH-NEX receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
This video is linked from Pioneer (www.pioneerelectronics.com/PUSA/Car/NEX/DMH-WC6600NEX#videos) as "How To - Apple CarPlay Wireless Setup-Nex" which is exactly what I am trying to figure out. But, the video doesn't come near addressing the subject of the video produced by Pioneer. More complete, helpful, step-by-step instructions would be helpful. The user manual has you jump around from different sections, Bluetooth, Apple CarPlay, WiFi Settings without much detailed information. What are the requirements for WIRELESS CarPlay? What Wi-Fi network requirements are needed? Use of the "infrastructure" network? Using my iPhone as a Hot Spot (provided by my carrier)? Or, does the thing need to connect to my home network? It works while directly connected, which is only half of the battle!
What is the model number of your Pioneer in-dash receiver? What is the iPhone? What version of iOS in installed on the phone? If you have Pioneer DMH-WC6600NEX, please watch this video for setting up your iPhone to work with wireless Apple CarPlay: th-cam.com/video/CUrxfgBy2BM/w-d-xo.html
@@pioneerelectronics Thanks for the quick response! The model is DMH-WC6600NEX. The model of the mobile device is iPhone 13 Pro Max. The version of iOS is 15.3.1 and tried with other iPhone devices as well. I am able setup Bluetooth without issue, and even later during the process later get the prompt, “Use CarPlay” in iOS. The video provided is better instruction overall. But, so far hasn’t solved the issue. Wired CarPlay works. Wireless CarPlay doesn’t work.
One more thing…Please provide step by step instructions for each connection type. For example, Apple CarPlay Wireless AND Wired, but without mixing in instructions for other connection types (such as Alexa or Android). If these instructions are provided separately, then it will reduce confusion. ALSO - What wireless network is preferred or recommended? Do I use the Wi-Fi network the Pioneer head unit creates? Etc.
Wow...this was VERY helpful...I just bought a used car that someone installed the Pioneer system in, and I was getting VERY frustrated! This cleared up some things...thanks!
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
I just got a a DMH-1500NEX but I plugged my phone in and nothing came up as far as carplay. Unless I need to find something on the stereo to make it appear?
I recommend to:
1. Install the latest version of iOS on your phone.
2. Restart your phone.
3. Press the DMH-1500NEX microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer DMH-1500NEX on the hard key panel to the far right.
4. Try a different USB cable. Just because a cable will charge the phone does not mean it will work with Apple CarPlay. Don't expect a $1 gas station cable to work. Get a good quality cable.
5. The USB extension cable must be plugged directly into the back of the Pioneer DMH-1500NEX receiver in order for CarPlay to work.
6. Are you plugging your phone into the USB extension cable that came with the receiver? Or are you trying to plug into an existing OEM USB port? It must be plugged directly into the back of the receiver.
You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
@@pioneerelectronics I was trying to plug it into the existing port. Thank you for the response. But how do I run my cord from the back of my stereo into my car?
@@RushGirnty19 The Pioneer DMH-1500NEX includes a USB extension in the box. You can see it in this Unboxing Video from Pioneer: th-cam.com/video/I1XFyRiTZKc/w-d-xo.html
I recommend to check the vehicle's glove box or center console, or other areas for the USB extension cable. It should have been installed when the vehicle was taken apart to install the new in-dash receiver. If you can't find it, contact your installer and ask where he put it. If the USB extension cable was not installed, ask to have it installed.
AVH-1330NEX, connected to speakers via RCAs (vehicle has existing amp/sub) in Standard mode. Guidance volume has always been too low to be usable (even at full volume for guidance volume, regardless if Apple Maps, Google Maps, or Waze). This has been a problem through multiple iPhones and iOS versions for a few years. Latest firmware on the radio. No issues with music, Siri, message volume. I've tried playing with all of the radio audio settings to no avail (and there are A LOT). You can hear it (out of front speakers only), but just too low. Thoughts/ideas?
Thank you for the detailed question. Please answer a few more questions to clarify things. When you say the guidance volume is low, are you saying the music does not mute when you hear a guidance command? Or the music is muted or attenuated, and the guidance command volume is still too low? Are you using Maestro RR in this installation? I read that you've installed the latest firmware for the receiver. I'd like to confirm that you have firmware version 18.39 installed.
Have you tried to press the receiver's microprocessor reset button? You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-1330NEX at the top of the hard key panel beside eject. Next, I recommend to do a Restore Settings. You can see this demonstrated in this Pioneer How To video: th-cam.com/video/OMJ5yJ6157g/w-d-xo.html Please note: When you do a restore settings operation, you'll need to select Standard Mode again when the receiver restarts. You can find a full playlist of How To videos about Pioneer AVH-1330NEX here: th-cam.com/video/xvp2910DqQs/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics Just updated a couple days ago to v8.39 (believe you have an extra "1" in your reference. I do have an interface for steering wheel controls - 95% sure it was a Maestro as I recall having to program it (I did this in late 2017 - my kids' car that I now have back again). If I set mute to ON vs. ATT it helps slightly as the music goes totally off, but not really usable. Also, phone call volume isn’t really loud enough to use while driving either. Soooooo. Full reset. CarPlay music can get plenty loud! Guidance is waaaay too quiet. Phone calls although usable with the car off, is too quiet to be useful while driving. Not nearly as quiet as guidance, but far from ever being called loud.
@@cz9h3d Thank you for your detailed response. I think I understand now, and we can solve the issue. I believe this has directly to do with the receiver's --REAR-- RCA outputs in standard mode, being used to send signal to the external amp and subwoofer.
Pioneer in-dash receivers output Bluetooth Phone Call audio and navigation instructions to the FRONT speaker outputs and FRONT RCA outputs only. Not to the rear RCA outputs, and not to the rear speaker outputs.
The Bluetooth Audio source, or music played from your phone, will play through all outputs, both front and rear. Your in-dash receiver may be installed incorrectly.
There is an easy way to test it. Change to the HD Radio Source and tune in any strong radio station. Next, using the receiver's Fader control, fade the audio output all the way to the front. You can see how to use the fader control in this video: th-cam.com/video/Z86fQryoRVk/w-d-xo.html
Can you hear music? . If you fade the system all the way to the front and can not hear music, or the music volume is very low, that may mean the in-dash receiver’s FRONT audio outputs are not connected in your system. You may have the receiver's rear RCA outputs connected and operating front speakers in your vehicle.
You can see the front / rear / subwoofer RCA outputs on the receiver in this video: th-cam.com/video/adbrQ6hUzwQ/w-d-xo.html
If you change the RCA output connection to the receiver's Front RCA Output, you'll be able to hear phone calls, and navigation instructions, etc...
You can find a full playlist of How To videos about Pioneer AVH-1330NEX here: th-cam.com/video/xvp2910DqQs/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics Front speaker volumes user fader are super low on HD Radio source - BUT, rears are quite loud when moving to either left or right rear. Fader adjustment is sending signal to the appropriate in-car speaker. If I have RCA's reversed, would I not see the opposite - fader to front speaker would result in sound from the rear?? Or is my OEM amp in the equation helping to create this condition? I'll swap the RCA's just for the heck of it and see what I get!! Note: adjusting the speaker inputs, +db fronts, -db rears, to get music properly distributed or even front heavy - still doesn't get enough volume for guidance...BUT the fader operates the correct speakers, and all are plenty loud for music. ;)
@@cz9h3d Please clarify What you mean here: "Front speaker volumes user fader are super low on HD Radio source" If the receiver is faded all the way to the front and the volume is low on the front speakers, this may be an issue with the OEM amp. It's possible the amp is using only one input and sending that signal to all speakers? Maybe how the gain is set, or how the OEM amp filters out certain frequencies.
My car play was displaying at first but now the option does not come up. How to I fix this ?
I recommend to Restart your iPhone. Plug your iPhone into USB Port 1. Make sure Apple CarPlay is switched on in your iPhone Settings. Change the Cable you are using. Press the microprocessor reset button located on the hard key panel on the in-dash receiver. You'll need a paperclip or some other small point to reset the microprocessor. You can find more videos about Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html You can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
My AVH1330NEX was connecting to my iphone 13 with no issues for over two years. All of a sudden the phone connects to the car, charges the phone, but only works on bluetooth mode. Switching it to the USB/iPod input results in nothing. Even on the home screen of the radio, the app CarPlay still shows up but its greyed out. Not sure what to do with this.
1. Please be sure to install the latest iOS updates for your phone.
2. After installing phone update, please be sure to restart your phone.
3. I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the micro processor reset button. You can find the microprocessor reset button on Pioneer AVH-1330NEX at the top of the hard key panel next to eject.
If you press the microprocessor reset button and this behavior persists, I recommend to try a different iPhone cable. Cables can and do fail. Don't get a $1 gas station cable. Get a good quality cable and try again.
AVH-1330NEX was manufactured back in 2017. There have been several firmware updates for this product. Please be sure to install the latest firmware for your Pioneer AVH-1330NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-1330NEX#downloads
You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
Does Siri need to be enabled on your iPhone in order for the receiver to utilize Siri or does the receiver have its own independent Siri? In other words if I disable Siri on my iphone will it be disabled on the receiver as well?
On the connected iPhone, Siri needs to be switched on for voice activation to work in Apple CarPlay. If you don't like using Siri, much of Apple CarPlay can be operated by touching the screen and never using voice commands. You can find more videos about Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
Are you a distributor in the Allison park area I live in the south hills and would like to buy one from a store not online and possibly check out some other units for my vehicles
I recommend Best Buy locations in your area near Century 3 or Bethel Park. Pioneer car audio products are available in store and they offer installation. Several Pioneer in-dash receivers that work with Apple CarPlay should be available including the Pioneer AVH-W4500NEX for wireless CarPlay seen here: th-cam.com/video/-JidsPPVKnA/w-d-xo.html and you can see how to make the wireless connection to Apple CarPlay here: th-cam.com/video/MkWffv3vB6Q/w-d-xo.html you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
can ZL5150BT connect apple carplay without using usb cable?
What is the full model number of your Pioneer in-dash receiver? It may begin with the letters DMH- or AVH-
Im getting a light static and/or hum when plugging in the phone. It sounds similar to when my phone volume was too when using an auxiliary connection .
Please clarify your question. What is the model number of your Pioneer in-dash receiver? Are you hearing the sound when you plug in the phone through USB? Is the sound only when using Apple CarPlay or on other sources such as AM/FM radio? Do you hear the sound when using a USB flash drive? Have you tried to a new or different USB cable? You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
I can’t get my CarPlay to work. My usb is hooked up and working correctly I assume because it will read my phone and charge. But it doesn’t allow CarPlay to work. I have a 8 plus and a 4200 nex
The Pioneer AVH-4200NEX has 2 USB ports on the back. Apple CarPlay will work with USB Port One only. It does not work on USB port 2. You can see it here: th-cam.com/video/g5juaKNXr90/w-d-xo.html Please watch the video for the proper Smart Phone Setup settings. Apple CarPlay must be switched on. Please be sure to have the latest firmware installed on the AVH-4200NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-4200NEX#downloads You can find more videos about Pioneer AVH-4200NEX here: th-cam.com/video/vNHEvsZ5JKc/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
How do I get this to connect wirelessly via Bluetooth the entire time instead of USB?
What is the model number of your Pioneer in-dash receiver? Some Pioneer receivers are capable of Wireless Apple CarPlay and Wireless Android Auto. And some require a USB connection.
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics dmh-c5500nex. Please help because I’m about to throw the whole thing away 😂
@@stacyedwards6851 Please take a few moments to read this full response. I'll try to clarify the difference between Apple CarPlay wireless, and using the in-dash receiver for wireless Bluetooth Phone calls and wireless streaming audio.
The Pioneer DMH-C5500NEX connects with Apple CarPlay and Android Auto with a wired connection through USB. I'm not aware of a way to connect DMH-C5500NEX to Apple CarPlay wireless.
Just to be clear, the Apple CarPlay connection for DMH-C5500NEX must be through USB. However, if you want to connect your phone through Bluetooth for hands free phone calls and wireless streaming audio only, that can be done through Bluetooth without using a wired connection. This is not Apple CarPlay wireless. It's just hands free phone calls, and streaming audio through Bluetooth and it does not require a wired connection.
You can learn how to pair your iPhone through Bluetooth in this How To video from Pioneer: th-cam.com/video/i78qojRRJUk/w-d-xo.html
You can learn how to play some music from your phone through Bluetooth in this How To video from Pioneer: th-cam.com/video/TUaLxpVLg5g/w-d-xo.html
You can learn how to make and receiver phone calls through Bluetooth in this How To video from Pioneer: th-cam.com/video/SZlRTKxYSDk/w-d-xo.html
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: th-cam.com/video/xvp2910DqQs/w-d-xo.html
If you are looking for Wireless Apple CarPlay, you'll need a different receiver from Pioneer. Please consider the Pioneer DMH-WT8600NEX seen here: th-cam.com/video/QrvNkGgRo7E/w-d-xo.html
Or the Pioneer DMH-W4660NEX seen here: th-cam.com/video/B2TTfJUD-es/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
How does the Apple change that disables notifications while driving affect the use of CarPlay?
According to my iPhone under "Do Not Disturb" and then "Do Not Disturb While Driving" > Learn More... "If your car supports CarPlay and your iPhone is connected, Do Not Disturb while driving isn't activated. Instead, CarPlay uses your car's built-in display to help you stay focused on the road." You can find more videos from Pioneer here: th-cam.com/users/pioneerelectronics
iPhone must be plugged in, functions not available via bluetooth?
Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? What are you trying to do with the receiver? Are you using Apple CarPlay? If you are using Apple CarPlay are you playing music from selected app through CarPlay? You can find more videos on Pioneer's TH-cam Channel here; th-cam.com/users/pioneerelectronics
AVH 2500 NEX
@@tvcenerherm The Pioneer AVH-2500NEX works with Apple CarPlay with a wired connection through USB. When a compatible iPhone is plugged in through USB, I recommend to use Apple CarPlay to make hands free phone calls, and to play music from your phone through many different apps available through Apple CarPlay. It's normal operation for Apple CarPlay to disable Bluetooth on the in-dash receiver. If you want to use Bluetooth, I recommend to unplug the phone from the in-dash receiver. You can learn more about using Apple CarPlay in this How To video from Pioneer: th-cam.com/video/_P3_aPDLK2E/w-d-xo.html
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html
Please be sure to install the latest firmware for your Pioneer AVH-2500NEX. you can find it here: www.pioneerelectronics.com/PUSA/Car/SiriusXM/AVH-2500NEX#downloads and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
How o you pair your phone to the pioneer radio not using car play
Here is a Pioneer video showing how to pair your iPhone to a Pioneer in dash receiver. th-cam.com/video/i78qojRRJUk/w-d-xo.html
Does the USB adapter also provide power to your device?
Yes. When plugged in through USB it will charge your phone. You can find more videos about Pioneer AVH-2330NEX in this Pioneer You Tube Playlist: th-cam.com/video/xvp2910DqQs/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
Yes it will charge your phone
Why is my iPhone 8+ saying no response when connecting usb to pioneer adapter? Could it be my usb cable?
You did not mention what Pioneer in-dash receiver model you have. I recommend a few steps. 1. Restart your phone. 2. I recommend to press the Microprocessor Reset Button. You’ll need a paperclip or some other small point to press the microprocessor Reset button. I can't tell you where the button is, cause I don't know what receiver you have. 3. Install the latest firmware for your Pioneer in-dash receiver. I can't give you a link to the latest firmware, cause I don't know what receiver you have. 4. Use the cable that came with your phone and plug directly into the back of the receiver. If that does not work, try a different cable. Not all phone cables are the same. A cheap cable may charge your phone but it will not allow data to pass through. 5. If you get it to work with the cable plugged directly into the receiver, then try the extension cable. You can find more How To videos about Pioneer NEX receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Deckerd Otto Avh-2500nexIt was working when I had my Samsung galaxy S8+. I think it’s the cord that I have
Please be sure to install the latest firmware for your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2500NEX#downloads
Is it available in Avh x490bs
No, the Pioneer AVH-X490BS does not support Apple CarPlay. If you're looking for an Apple CarPlay receiver, Pioneer has many options. Please consider the Pioneer DMH-W4660NEX seen here: th-cam.com/video/B2TTfJUD-es/w-d-xo.html You can find a full playlist of How To videos from Pioneer with very similar operation to AVH-X490BS here: th-cam.com/video/C6h7IJ7wpmc/w-d-xo.html Please be sure to have the latest firmware installed for your Pioneer AVH-X490BS. You can find it here: www.pioneerelectronics.com/PUSA/Car/DVD+Receivers/AVH-X490BS?tab=firmware#downloads You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Just got an avh 2500 nex. It’s not letting me auto play. Do I need to update the firmware?
I recommend to press the microprocessor reset button on the Pioneer AVH-2500NEX. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the hard key panel to the right of the eject button. Also, please restart your phone. Please install the latest firmware for your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2500NEX#downloads What phone are you using? What version of iOS? Did you use the cable that came with your phone to connect to the in-dash receiver? A good quality cable is required. Just because the cable will charge the phone does not mean it will carry data to the in-dash receiver. You can find more How To videos with very similar operation to Pioneer AVH-2500NEX in this Pioneer You Tube Playlist: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
im getting this message on my Pioneer AVH-3500NEX in my car can someone please help me fix this usb was disconnected for device protection. do not re-insert this usd memory into the unit. please restart the unit.
I recommend to try a different USB cable to connect to your phone or USB flash drive. Or to use a different flash drive. I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button behind the detachable face on the AVH-3500NEX as seen in this How To video from Pioneer: th-cam.com/video/ibWu0o2hW24/w-d-xo.html
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here; th-cam.com/users/pioneerelectronics
I like how they had clap tone on the screen 👍
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
can i use google maps instead of apple maps? this is a dealbreaker for me. im not talking about waze. just google maps.
If you are using iOS 13 or newer on your iPhone, you have the option of Google Maps, or Waze, or Apple maps for navigation. You can see it here: th-cam.com/video/4JHAHPfSbzw/w-d-xo.html You can learn more about Pioneer NEX in-dash receivers in this video: th-cam.com/video/Y-lL_eIB3Ug/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
My AVH2440 doesn’t launch CarPlay automatically when I connect my phone , I have to go the main screen and tap the green CarPlay icon ... it did auto launch the first times I did it .. not anymore ... any help ?
Usually, this depends on what was on the in-dash receiver screen when the phone was disconnected. In most cases, the in-dash receiver will return to CarPlay if you had CarPlay on the screen ( not the radio, or BT Audio on screen) when the phone was disconnected. You can find more videos about Pioneer AVH-2330NEX here: th-cam.com/video/xvp2910DqQs/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
Does spotify show the album art?
Yes. Spotify shows album art. You can see it here: th-cam.com/video/pnhO83Vz4XQ/w-d-xo.html You can see more videos of Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html
Theres no keyboard option for maps?
There is a keyboard available for Apple Maps. The parking brake must be engaged to use the keyboard. You can find more videos about Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html
But how do you connect to Bluetooth
Here is a video showing how to connect your iPhone to a Pioneer NEX in-dash receiver through Bluetooth: th-cam.com/video/i78qojRRJUk/w-d-xo.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receives here: th-cam.com/video/TUaLxpVLg5g/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Can you use google maps?
Can you use the Google Maps app in Apple CarPlay? No. However, if you choose to use the Waze Navigation app, it uses Google Maps, that changes the answer is yes you can use Google Maps. You can find more videos about Pioneer AVH-2300NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
Yes you can.
I know it says Apple CarPlay but is it compatible with Android Auto also? Thanks for the reply in advance.
Here is a video about Android Auto: th-cam.com/video/kpKYks-17gM/w-d-xo.html All Pioneer NEX in-dash receivers are compatible with Apple CarPlay. Some are also compatible with Android Auto. You can see more here: th-cam.com/video/yoPE7eF84-0/w-d-xo.html You can find more videos from Pioneer here: th-cam.com/users/pioneerelectronics
What the hell happened to the 1400 nex?
The Pioneer AVH-1400NEX works with Apple CarPlay nearly exactly as shown in the above video. This video was made before the the Pioneer AVH-1400NEX existed.
You can find a full playlist of How To videos from Pioneer about NEX receivers with nearly identical operation to AVH-1400NEX here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
Can you adjust the bass if you’re playing music?
Yes, take a look at this video for audio adjustments. All audio adjustments happen while you are playing music. th-cam.com/video/Z86fQryoRVk/w-d-xo.html
Thanks man I didn’t know you could hold the home button to activate Siri or tell her to open apps
You can find more videos about Apple CarPlay on your Pioneer NEX in-dash receiver here: th-cam.com/video/4JHAHPfSbzw/w-d-xo.html You can find a full playlist of How To videos from Pioneer about AVH-NEX receivers here: th-cam.com/video/ObpKXwrN8us/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
This video is linked from Pioneer (www.pioneerelectronics.com/PUSA/Car/NEX/DMH-WC6600NEX#videos) as "How To - Apple CarPlay Wireless Setup-Nex" which is exactly what I am trying to figure out. But, the video doesn't come near addressing the subject of the video produced by Pioneer. More complete, helpful, step-by-step instructions would be helpful. The user manual has you jump around from different sections, Bluetooth, Apple CarPlay, WiFi Settings without much detailed information. What are the requirements for WIRELESS CarPlay? What Wi-Fi network requirements are needed? Use of the "infrastructure" network? Using my iPhone as a Hot Spot (provided by my carrier)? Or, does the thing need to connect to my home network? It works while directly connected, which is only half of the battle!
What is the model number of your Pioneer in-dash receiver? What is the iPhone? What version of iOS in installed on the phone?
If you have Pioneer DMH-WC6600NEX, please watch this video for setting up your iPhone to work with wireless Apple CarPlay: th-cam.com/video/CUrxfgBy2BM/w-d-xo.html
@@pioneerelectronics Thanks for the quick response! The model is DMH-WC6600NEX. The model of the mobile device is iPhone 13 Pro Max. The version of iOS is 15.3.1 and tried with other iPhone devices as well. I am able setup Bluetooth without issue, and even later during the process later get the prompt, “Use CarPlay” in iOS. The video provided is better instruction overall. But, so far hasn’t solved the issue. Wired CarPlay works. Wireless CarPlay doesn’t work.
One more thing…Please provide step by step instructions for each connection type. For example, Apple CarPlay Wireless AND Wired, but without mixing in instructions for other connection types (such as Alexa or Android). If these instructions are provided separately, then it will reduce confusion. ALSO - What wireless network is preferred or recommended? Do I use the Wi-Fi network the Pioneer head unit creates? Etc.
Update: It is working now after changing some non-user definable settings. Thanks!