[HOW TO] CYMA CM.045A DISASSEMBLY AND INTERNAL REVIEW
ฝัง
- เผยแพร่เมื่อ 26 ม.ค. 2025
- In this video we do an internal review and disassembly of the CM.045A AKS74U.
Come and check out how to complete this and what the quality of the internals are like.
Don't forget to like, comment and subscribe!
Pheas
![[REUPLOAD][OLD SCHOOL][HOW TO] CYMA CM.028 AK-47 DISASSEMBLY - internal review](http://i.ytimg.com/vi/q5v28-h8luA/mqdefault.jpg)
![[REUPLOAD][OLD SCHOOL][HOW TO] CYMA CM.028 AK-47 DISASSEMBLY - internal review](/img/tr.png)
These disassembly tutorials are Pheas unique selling point, simplifying the process and using a wide range of models on the market these demystification videos help me find where an issue may be . having recently acquired a used 74u i was keen to rectify some of the wear and tear issue that are very common to the model , what i did sweat over is the muzzle flash that wobbles , lo behold the grub screw , then a pin for the top hand guard , the loose fire selector, all the little wobbles and shakes , this video is invaluable teaching as well as clearly showing the whole mechanical process. And as my proctologist tells me "there is no magic to what i do " .
This.. this comment right here. Made my whole day! Thank you so much! I am so glad you have found the videos so useful! Pheas
I love the video, I was hoping for a modern internal review of this gun because after all parts change through the years!
Awesome review, it's always nice to see some love for the AK platform!
I've got a 045c and was exactly looking for a disassembly video to learn how to open it and swap out some parts, this is just perfect.
Note The first time when you unscrew the flash hider, it will be very hard, make sure to push the button catch down and use a screw driver on the edge holes to crank it loose, I couldn't unscrew it by hand because it was very stiff, after that it could be detached and reattached easily
They may have stopped using the loctite or whatever it was making it hard.
I bought one a couple months back and the flash hider come off smoothly by just pushing the button down. The threads are completely clean on mine
I been trying to re-attach it and cant because theres a screw inside of the muzzle brake
already at 3.76k it was only a week or two ago when you hit 3.5k i think youre going to hit 4k before this year ends for sure!
CYMA makes awesome AKs!
Thank you for this, mine didn't come with a manual so I had to download the Engrish pdf of it. This video will help a ton
Thank you. I found your channel a few days ago and have been looking at this gun. Cheers for this.
God bless you..this is just what i needed to start opening mine for cleaning....also have a problem with the trigger..on single shot after i fire a couple of times..the trigger remains blocked
Could you do a review and strip of a Cyma cm128 hi capa pistol
Hiya. Thanks for the suggestion. I have virtually no experience with teching on pistols, BUT I am willing to give it a shot. I will add it to the list and get one when I can. Pheas
I work for a subcontract company making these and suddenly all orders double. I bet you didnt know CYMA subcontracts, but if theire is one complaint they track it down to the worker! Oh yeah, great video giving me flashbacks.🤠 I think we changed the compression springs that are more flimsy, but the seals have been more improved and lubricated. There's a couple other things I saw that look different from now but I think they are trying to improve it because it's become more popular. I think you can expect an official upgrade soon and upgrade parts available like better battery, battery housing with charging port, and larger compression chamber in 2024.
Do you know if the receivers are unique to the AKS-74U model? I am looking to swap my front end with a cyma AK-105 front end and am not sure.
Hey I have the full metal version and I have been unable to take the upper hand guard off? How?
Hiya, is it the one with the Railed handguard? Pheas
Perfect video, and exactly what I was looking for. Pheas.. you are awesome. Thank you!
Glad I could help you out!! Pheas
@@PheasAirsoft Every time I get a new gun, your channel is my first stop. 💪💪
I’ve been having a tough time putting the trigger back into its place. It seems like the spring is just not cooperating. And tips on how to get it to work?
Do you know if the dust cover can be removed? Great video btw.
I tried to remove the flash hider but it sense to scratch up the threading I removed the orange pin but seems to be tough to take off. I tried to heat it up to heat the glue so it can twist but seemed to ruin the threading. Any advicev
I have the railed and m4 crane stock version
@@simplicit9737 Is there a grub screw or anything? Feel free to drop me a message on insta / facebook or email one pheasairsoftyt@gmail.com with some pics of it and see if we can figure it out. Pheas
@@PheasAirsoft thanks for the quick reply. I know what I did wrong. gonna rotate clockwise 1st the remove the 24mm. Then counter to remove the adapter. Correct? That’s the thread was stripping
@@simplicit9737 yes, thats right. the larger outer one is normal positive thread, the inside one to get to the smaller 14mm is a negative thread.... Cant believe I didn't think to check!
Pheas
How did you get the flash hider of so easily I can’t even move the pin without a tool
I think I got lucky with the casting / build of mine that it was just so easy to push back. Or maybe I am freakishly strong and didn't realise... This is now the story I will stick with ha ha ha. Pheas
Hi Pheas! Can you use the plum handguard and wooden handguard interchangeably? Im thinking of buying this with the wooden hanguard, but buying the plum one for different kits.
I've switched my wooden ones for the plum as I intended to paint over them, although, it's worth to mention you can't use one of each. The upper has to be the same as the lower handguard otherwise they wont snap into place.
@@method0G ok, thanks!
Thank you! This is so helpful :)
Ak parts weren't actually made from Bakelite at least not commonly, that was a 40s material that quickly got replaced by various plastics. The Ak series used AG-4S which is a glas reinforced plastic in a sort of ember color that often got mistaken for bakelite. Also thanks for the tutorial, my airsoft didn't come with one, interestingly enough that lock on the handguard is installed the other way on mine which lead to a bit of a confusion, it was also unlocked when I got it.
Dude! Thank you! Im gonna get this gun,and get a zenit rail a bit later and needed to know how to take the handguard off.
Hi, real AK owner here. The hinge on the folding stock isn't easily replaceable. The m4 stock adaptors are meant to go on the back of standard stamped recievers (fixed stock AK'S). They literally just don't have the right reciever for the job, but luckily in airsoft its not that hard to replace recievers.
Hiya. Thanks for that. I do love getting to know the real side of it and often wondered if this style of system was available for AK series or not. Thanks for the info! Pheas
How do I put a 14mm negative supressor on this?
Whats the type of motor ? Thanks !
Thanks for this. Currently half and half between this and the high speed mp5. Will definitely come in use down the line.
If you get the mp5 just dont get the sd
@@dilbertduck hi. It was the sd6 I was looking at. Why what's up with it?
@@hal752 The sd6 has no thread for tracer and is a pain to even get a tracer in there. 2. Bullets like to bounce off the end of the silencer and then don't go straight. The hand guard feels very flimsy aswell
@@dilbertduck thank you for your reply. I was going to stick in a barrel to extend it to the end of the actual surpressor. Personally I've never used tracing BBS so not to much of a issue.
Also the sd6 has a kinda shitty trigger unit it cycles horribly in semi
Is it possible to unsolder the trigger connections without taking the gearbox apart
Yes it is, In the AB++ install video I have done (link below) i didnt have to open it at all. th-cam.com/video/_lCpluWWYZ8/w-d-xo.html
Pheas
My pin to remove the muzzle break won’t budge…..?
Can you do one of the e&l gun? I can’t get my gas tube off
how did you get the dust cover off i too out the pin but now its stuck
im about to hpa one of these !
any tips? also my first ak !
loving this video, thinking about getting one myself
so I got it, first time dissembling my krink, had to quit after like and hour and a half because of a stripped screw under the hop up plate
What do you mean by teeth on the pins? Are you using a hammer and punch to remove them?
Hello, the body pins have "teeth" / ridges / parts to help them grip and not slide out, which I generally use a punch and hammer to tap out. Pheas
Did you hit the side with the teeth or the opposite? @@PheasAirsoft
@@dwightriley554 if pushing out, hit the side without the teeth. If pushing in, the teeth should be the last part back in( hit the teeth side) pheas
Hello friend, I just received exactly the same replica, what internal improvements do you recommend for it, or what do you think is the most convenient to change to take this into account? Thank you very much in advance, greetings
Hello! It all depends on what you are look to get out of it. Out of the box they are pretty damn amazing! If you want faster rate of fire... then a new motor would be a good option, and is realtively easy to swap. If you want more range, then a tight bore with a good quality hop rubber (maple leaf MR or a Delta Armouries Rhop rubber plus an omega nub with either will do well) after that... a mosfet is ALWAYS a good investment, but those are harder to install and set up. Pheas
My flash hider must have been cross threaded at the factory. Removing it required heat, pliers, and a wrench and it destroyed the threads and hides.
Mine as well
bumped the rear pin out, unscrewed the barrel plate in the magwell, and got the set screw, but still won't even budge. been bashing on the front sight block with a mallet and no go. am i missing something?
fuck me, im a total idiot and didnt bump the big pin out, thanks for the walkthrough very helpful when you watch it properly lmao
@@FSM1138 Glad you got sorted in the end! ha ha h. Pheas
do you know the lenght of the muzze device? it seems like the inner barrel is ''hidden'' inside part of it and I wanted to put a tracer on it but I'm worried if it is gonna work
Hello! I dont have this anymore, but I think the actual inner barrel runs to the end of the proper outer barrel (maybe a little longer) if you remove the muzzle device, there is a 14mm negative to 22mm adapter, this needs (usually) a grub screw removing, then this will expose the 14mm threads, then you can fit a tracer. You might need to add a 1" outer barrel extension or replace the inner barrel for a touch shorter one. Pheas
The pin holding in my muzzle break isn't moving. Is there anything else that needs to be done before it moves? Thanks!
Actually, I can answer this: Yes, there's a set pin holding the muzzle break pin in place. Also, a set screw holding the whole thing on. They wanted to make damn sure it didn't come off. lol
@@jonmacq6622 Glad you got sorted in the end!! Pheas
If you can't take off the underbarral handguard take off the flash hider
What do you think about APS brand? Im planning to buy a full metal version of an ak74 but i havent heard the best about this company even though most reviews were old. Thanks
Hello! I have only unboxed one APS product and I was not impressed with alot of the design decisions they had made internally. Externally it looked amazing, but it was not the best quality of cast or paint work, the guy who then bought it said things broke very easily and he has had to replace things. I hear a lot of negative things about APS so I would consider possibly avoiding. Pheas
Bruh, the stock locking latch broke, and I need to replace it. I have a different AKS-74u, and I need to get the glued orange tip off, which I don’t want to do. Anyway I can get the gearbox out without the barrel and hop up? Can I just jimmy it out?
Hiya. If it is this style of AK then you have to take that front assembly out to remove the gearbox I believe. You might be able to just remove the screws in the hop unit and see how far forward it will go to allow the gearbox out, but still might not go. Good luck with it, Pheas
So there's no capability to quickchange the spring?
Nope! Pheas
I’m thinking about getting one of these is there a tracer unit do you recommend that wouldn’t break the bank
To be fair they are all much of the same, the only one I havent had a good experience with is the nuprol ones. Had a couple now and seemed to have dropped unlucky and found they had loose soldering connections so would just turn off after one shot. But find one that matches your budget! Pheas
Do you know where I can get a replacement dust cover the Krinkov I got had the iron sight off center and bent to the side
Hello, if you are outside the UK, then : www.taiwangun.com/mount-rail/ak-receiver-cover-rail-cyma?q=AK+cover thatr should cover you Pheas
How do you put the bottom hand guard back on
Hello! CHeck out this video, part way though, it should give you what you need for the handguard: th-cam.com/video/TReXI0oPsR4/w-d-xo.html Pheas
I have this model and it shoots to fast for my local airsoft range. It’s over 330fps and even with the hop up at the lowest it’s still like 10fps lower. They said to change springs. I don’t see any springs in your disassembly. Any ideas?
At around the 12:34 mark in the video, the big long spring, that is the spring you need to change, I would recommend an M95 or 90 spring to make sure you are below 330fps. Pheas
@@adamwatkin6584 thank you so much. I must have fast forwarded to much and missed the part of the spring.
At 1:26, my pin is like gluedd in tight, what do i do?
Hmm, that is very very odd, they are 99% of the time on a spring that can be pushed in and out of the way. Does it not even move side to side? Pheas
@@PheasAirsoft no it does not, i had to bang it out with a hammer and screwdriver sadly
Just got mine and love it. Great video. In depth. Do you think it would handle an 11.1 15C lipo? Someone told me it could fry the trigger connectors? Another friend told me just send it lol.
Hiya! Glad you are liking my content! It would certainly handle an 11.1v lipo, it will put added wear on the trigger contacts from "arching" which is basically the electricity jumping between the contacts and burning it slightly. Now this is a slow process and will occur more quickly with an 11.1 than a 7.4v but still talking ages and ages before it causes issues. You could replace all your wring and install a moset based system with control wires on the contacts, this stops arching and increases the amount of power from the battery getting to the motor (as it is direct from battery to motor and not via the trigger block) but this takes money and a bit of expertise to install. You will be fine with an 11.1v ...as your mate says... Send it! Pheas
@@PheasAirsoft cheers from California man!! Gonna send it! Haha. Thank you.
@@dethpig420 You are very welcome! Enjoy! Pheas
Hi , i have a cyma cm045C. If i want to add a tracer unit ,given that it has a long inner barrel that protrudes to the flash hider. What are my options in oder to install a tracer unit? Oh btw mine seems like the muzzle is hard glued in as well.
Also, if i want to lower the fps, what would i want to change?
If possible, can you post me some links to the stuffs i would need to buy, that would be great. Thank you in advance and Have a nice day sir.
Hello! First thing you will need is an outer barrel extension to cover the inner barrel ORRR change the inner barrel to be shorter (more hassle). As for changing the spring, then you will need to disassemble the full gun and swap the springs out and put a new one in and then reassemble. Pheas
@@PheasAirsoft Thanks for answering. Sorry im new to this sport. Do you know what size of the shorter inner barrel should i need if i were to go that way in order for the tracer unit to work sir given that its stock now is 265mm , i think?
Thank you again.
@@soirung0727 It will depend on how far the inner barrel sticks out, they come in 1inch and 2 inch sizes, so take the muzzle off and measure roughly how much is exposed then you will know what to get. Welcome to the world of airsoft... your wallet will hate you for it! ha ha Pheas
dang i must have a old gen cm045A cuz i bought mine the day it was released and it have the brass cylinder and plastic cyl head and piston/head
its nice to see that they are improving their parts
I was surprised that they have what they do. I knew about the neo motor but i didnt know everything was blue. Also the air nozzle was a brittle plastic a couple years back. Now its blue instead of clear. They also dont cake green shit inthere. Now its a much smaller amount of blue shit. I thougjt i was going to have to regreese to make it easier to work with. The only upgrades you can do not counting rof or fos are regrease, shims, and aoe. Still needs a weaker spring.
Pheas, hi. i would to ask if the 30$ for the tune up service are useless on taiwangun...do u know something about?
Hello! On something like a cyma, especially the recent cyma I would say not to bother, but on other brands I would consider it, especially something like APS or JG, as their shimming and grease etc are a bit sub par. That $30 is likely to extend the lifetime of your gun and something you are likely to need doing before long anyways. So good idea to get it done at source. Pheas
Are your sights canted? Mine were. Any fix?
Not that I noticed at the time. Pheas
is there a way to adjust the sight on the back? mine came twisted to the left.
Hello! I have not heard of that, like actually broken / twisted or just pushed to the left side of the bracket? Could you send me a pic via insta or email or discord or facebook to see what it looks like. Thanks! Pheas
@@PheasAirsoft its kinda pushed to the side.pushed like a lever sorta. and sorry i can't send images because i dont use any of those
@@seventhest super late reply, but my first gun came like that too. It had been riveted on crooked at the factory. I sent it back to Evike for an exchange.
whats the barrel length on the 045c?
what hop up rubber do you use? do you have a link?
Hiya. My typical go to rubber is a Prometheus airseal purple rubber as I always have great results. I will sometimes use maple leaf MR rubbers with omega nub, but they are picky about which hops they feed with / in. Pheas
@@PheasAirsoft Thanks :)
Any place I can get a another 74u barrel, mines completly stripped.
Hiya, if you are in the EU, i am pretty sure Taiwan gun has them in stock. Pheas
Can you disassemble the cyma cm040b ak 105
Hello! If i do it wont be for some time, working through a back log, This disassembly here should be very very close to it though! Pheas
Why are there no VFC versions of the AK47? There's AKM's and AK74's but no 47's.
I honestly do not know... Very good question. Pheas
Want to take apart and upgrade my cyma ak but i know i’m going to bugger it up
Its tricky the first time or too, but take it slow and take photos at each stage (for reference) then it should go back together without too much effort. Pheas
Hey, I thought of buying my first airsoft weapon for bday just a few days ago; a APS-made AKS-74U (because of the really neat aesthetics and the blow-back) but in the last moment I went for the CYMA one since EBB drains the battery more, there is quite an amount of hate on APS (due to the internals they put into their weapons, latest opinions I noticed were from 2y ago even from Reddit which is the worst place possible for advice) and there were little reviews about the gun itself*.
I can't believe I'm asking this stupid question on a platform like this instead of a specified ASG forum, but did I just actually dodge a bullet? I know, that's a lot of text but I am purely honest.
*There were in fact some videos on YT showcasing the gun, but they were made by non-English and/or non-Polish speakers.
Hiya. My past experience of APS has been bad, where the inernals were of very questionable quality and didn't last long before breaking. In terms of their AK I can't comment on it, but if it is still the same as the older one then you may have dodged the bullet there. The new stuff, although they have still made some questionable choices at times, seems to be fair solid internally and externally. The e-boar we had, is with its new owner now and he has had no issues at all, and he has put a fair few rounds through it now.
I will add the APS AK to the "to get" list to see what it is like and bring a modern review to the table and disassembly as well of course.
The Cyma one is an excellent piece of kit though and will serve you well!
@@PheasAirsoft I have no words other than a absolute thank you for a word of objectivity.
@@coloneldawid2472 you are very welcome!
Just avoid EBB
APS stands for a piece of shit. The cyma VFC spec aks (this is a video on one) are actually amazing and solid choices.
Ah yes, very useful. Will receive my ak74u in a couple of days myself. Hopefully that piece of kit will last a while.
Hello Pheas, I was excited to receive my 1st airsoft gun. I first fired it a few days ago and everything was fine. Last night I tried again and now it isn't working. The trigger and everything works as usual but the pellets won't feed from the magazine and shoot out the barrel. This gun is brand new so I'm not sure what the issue is. Can you please help me solve this issue? Thanks
Hiya. Sorry to hear you are having issues. The first thing I would like to ask: Is the magazine wound up? and have you kept winding it up? as it will need you to keep winding it up.
Next thing, Have you set the hop on it? and if you have, could you have set it too high causing a jam in the hop unit?
You could also make sure the hop isnt jammed too (use the clearning rod, with the mag out) just to be safe.
Let me know how you get on! Pheas
@@PheasAirsoft thanks for the reply. The gun is a Cyma Aks74u 045. I have put a jamming rod into the barrel, there is no obstruction and yes I have wound up the magazine fully. The only way the gun will shoot a bb is if I physically drop a pellet into the hole where the magazine goes into. Is a pellet suppose to be able to be dropped from the front of the barrel and fall all the way back into the air nozzle area? The pellet stops right before the hole opening and I have to use a jam rod to push it all the way into the back. Not sure if that means anything. So I'm wondering if this a magazine issue or a barrel issue. Also since I'm a noob and dumb I used some solid colored .12 bbs in the magazine. Did this ruin my gun?
@@kenshiroFNS the 0.12 BBS may not have helped but I can't see them having broken the gun. If you leave the mag out completely and look down the feeding tube, when you pull the trigger can you see anything moving in there? It might be very fast so maybe use full auto to watch. If there is nothing moving in and out them it could be that the tappet plate has broken (which can happen at any time really) let me know how they gets on. Pheas
@@PheasAirsoft yes, there is no movement. Is it an easy fix? I'm going to use my warranty if I have one
@@kenshiroFNS i would send it for a Warranty repair. It sounds like the tappet plate is broken. It'll be a quick repair and sent back out to you. Pheas
Is this long motor or short motor?
Short shaft in Ak. Pheas
@@PheasAirsoft will shs short motor high torque go in there ?
@@MrvaInfluencer Hiya. Yes it will. Pheas
How do I get the threded pin to come out?
Hiya, the one on the stock ?
@Pheas Airsoft thank you for responding. I eventually figured it out
Is there a way to remove the sights?
The front site can be removed, but it basically leaves you with nothing to retain the handguards with. The rear one cant really without mods to allow a different dust cover. Pheas
@@PheasAirsoft Thanks
always remember that working on AKs is more akin to blacksmithing than gunsmithing.
@@reflectivism true
the big pin for the outer barrel is not coming out
Class pheas love it
Hey what's the best battery for this gun?
Hello! Something like this would be ideal: www.taiwangun.com/lipo-7-4v/battery-li-po-1200mah-7-4v-25-40c-8fields?from=listing&campaign-id=19 Or you could get an 11.1v in similar dimensions and use that. Pheas
Can the Iron sights be taken off?
Hello The front sight could be replaced I think with a low profile gas block (or just shaved down if you needed to) the rear sight is part of the actual top cover so would have to stay, You might be able to get a similar styled / sized cover without a sight, but it would not be hinged like this one and might need modding to it properly. Pheas
Thanks for video!
the hop from the outher barrel do you know what kind of screws are that by any chaces becasue gave my gun to repair shop and they bascialy fucked it and i am missing those screws i am not going back there fuck them so from now on doing everything my self but any way do you know the size of those screws by any chacnes ?
Hiya, do you mean the 2 screws that hold the hop in place in the outer barrel? They are M3 type screws, Pheas
@@PheasAirsoft thank you !!!!
I can’t figure out how to take off the top hand guard
Does it not come off the same as this one? WHere you lift up the top cover and that allows the top handguard to come off? Pheas
My muzzle won’t come off, any recommendations
Hiya, the whole muzzle or just the adapter inside? Its not cast as a single piece is it and needs to be taken off the opposite way to normal. Some of the older models had the muzzle cast as part of the front assembly. Otherwise you could wrap it in some duct tape and get some grips on it and use the greater force from them to see if that helps. Pheas
@@PheasAirsoft I’m trying just to get the muzzle off, I tried the duct tape thing couple of days ago but my clampers broke through and scratched the muzzle.
@@solomonbristow7201 Bugger. The only other thing I could think is if it is glued on as well as threaded. Without seeing it in person not much else I can do, sorry! Pheas
@@PheasAirsoft thanks anyway man
Anyone know what type of screw this is and size?
How do I remove the flashhider, because of the glue, boiling water trick?
Hiya, the main one should just come off by pushing the pin in and unscrewing. the one underneath it (which is 22mm I believe but has 14mm ccw under it) should come off by undoing the grub screw in it and using your hands, if it doesn't have a grub screw and there is glue, then I would try a hair dryer or heat gun first (as these are probably more effective, if they aren't available make sure it boiling hot and try that. Pheas
@@PheasAirsoft I pushed the pin in, but mussel break wont turn, I'll try to find the grub screw.
Im assuming the mussel break is glued on because it won't turn.
@@Hondurez7 Then I think the heat gun / or heat source will be a must to get it going. I have never heard of them being glued on before. Good luck with the removal! Pheas
@@PheasAirsoft well, I tried hot water, nothing, I used a vice clamp, and still nothing, but the grub screw started grinding the threads, So I decided fuck it, I drilled a small hole to the grub screw and removed the mussle break most of the threads are fine, but the threads on my 10 year old ak broke off, and the 10 year old threads on my gemtech suppressor are fucked up. Dam... well at leat the mussel break is off my new ak and with a little JB weld I'll fill the hole at a later date. Thanks for telling me about the hidden grub screw!
Even a coue years later, some places still have the old ones on hand. however i did notice one thing about mine. The cylinder is wrong. Old cyma's have brass cylinders. Mine wasnt. It was silver. The rest was all still old cyma. The endbell in the motor was white the plastuc was white. The airline was a clear bfittle plastic. It should last a while and then the time comes i will change it out for a metal one. For now i will leave the gearbix as is. The motir has no torque or speed. I only get 10.2 rps on a 25c 1300mah 7.4 lipo. I checked ti see hiw stuff the pinion gear was and it wasnt at all. I did feel a little resistance but i could spin it with my thumb. Even my finger nail could turn it.
Hei bro i want buy a CM.045C its a really good gun right? Have you this gun? Can you make a video how to upgrade it to the limit?
Good video !
Hiya, unfortunately I don't have it anymore, with a lot of these guns, I get them in to do an unboxing and a disassembly and then they are sold on so I can buy others in.
Out of the box, if this was mine to keep, the only thing I would change is the motor, I would swap it to a better, high speed motor. As the range and accruacy and build quality is great. After 6 to 21 months, I would consider maybe a better inner barrel (like a 6.03 inner diameter) and a better hop rubber. But the quality is excellent out of the box!
Hope that helps!
Pheas
@@PheasAirsoft hmm okey :) i dont know what gun i buy :) i buy a gun next year not this year.
@@iamnotlegend_8879 It can be hard to pick a gun, especially when there are a few options. The CYMA stuff is very good recently and they are making some very affordable, but very good guns. I would look at the kinds of places you are likely to play. IF you are going to play a lot of CQB then you would probably want something smaller, like this one. If you are majority woodland where its more open, then just go for what you like the look of. Most of them can be upgraded to shoot how you want them to.
Good luck with picking your gun!
Pheas
I own this AK and lately I've tried to put a 20C 11.1V Li-Po in it and my piston fucking shattered. For some reason I got one with plastic teeth. (And I've bought it from a reputable seller in my country and had it worked on by a reputable techican in my area.) So I think that the internals may be worse from the factory nowadays so be careful out there.
Ok, this is my next purchase for sure.
You are a legend!
i cant get my flashider off, anyone know why?
Now i just need a video how to put it back up
Is it LiPo ready
Hiya, Yes it is, technically any / all aegs are lipo ready its just a term that marketing use to clarify that they can be used. Pheas
What Motor has it?
Hiya. I believe it's a neodymium magnet based motor somewhere between 16 and 18 TPA. Pheas
@@PheasAirsoftHey! I just got confused on where the motor is located, is it in the handguard?
@@landongilbert4042 Hiya, the motor is in the pistol grip, behind the trigger, the battery goes inside the top cover. Pheas
@@PheasAirsoft Thanks man! I really appreciate it!
Where can i purchase this? (Link)
hiya! sorry for the delay! Here is a link to where We got this one from : www.taiwangun.com/assault-rifle-aeg/cm-045a-cyma?q=cm.045&campaign-id=14 Pheas
Can u remove the stock?
Yeah just push the bolt holding it in from underneath and it will fall right out
is there a way i can contact you? im in big trouble with my gun
Hiya, you can reach me through Instagram DM, Facebook messaging or through email on pheasairsoftyt@gmail.com. pheas
@@PheasAirsoft thank you!
why would you not show the reassembly??? my gun is in all sorts a pieces and I have no idea how to put it back together. mostly my fault by i need help.
@@trethetruth527 this video is years old, I didn't know at the time people wanted the reverse process. The newer ones all show it. If you find one of my double bell ak disassembly they are nearly identical , so the rebuild section works a treat . Pheas
@@PheasAirsoft Thank you. My ak is still disassembled and I could really use some help. DO you think you can link the video you're referencing? It would really help.
Ooooo so close to ronin 47s coming in !
Pheas,I didnt rly heard good what is your e mail on livestream,you said that I e mail you about video where you dissasemble cyma svd s,can you please write your e mail in comments?Great video like always👍
Hiya. My email is pheasairsoftyt@gmail.com cheers! Pheas
I just got this gun today its supposed to shoot 1,5 joules but mine shoots 0,7 joule could this be a bad airseal? Im not good at taking the guns apart
Hiya. If it's brand new... Send it back and have them sort it for you, sounds not very good at all. If it's second hand, then sounds like a combo of potentially spring and Airseal. Pheas
@@PheasAirsoft so i went back to the shop and they tested 2 other replica’s turned out they had it wrong on their page LOL
Mine had absoulutely shitty airseals when I got it. Probably your case as well.
Nice vid Phes. Did chuckle at the "Loosen the grubscrew a bit more, oops". Just like when I do a stripdown, always something falling on the new laminate floor and disappearing.
Ha ha. I'm so clumsy as it is and then to try and do things whilst they are up in the air and on camera just makes it worse. You wouldn't believe how many cut bits there are of stuff like that! 🤣🤣🤣 Pheas
thank you
My flash hider pin does not move at fucking all. Tried heat etc nothing works.
Took some acetone on some q-tips and it got some of the glue around it, finished out with a cloth so I didn’t mar it up, a socket style screw driver and hammer and just gently tapped it down, about to boil some water and then get the first chunk of the glass hider off then the smaller part leading to the 14mm threaded section. Hope this helps.
AKS 74U CYMA CM045A or AK S 74 CYMA CM.040 or Specna Arms RRA SA-C14 CORE
If it was my money to spend... My personal choice would be CM.040. For the full wood externals, just such a beautiful piece of kit!
@@PheasAirsoft thank you!
@@ПјесмеСрпскеРепублике You are very welcome! Which ever you get send me a pic! Pheas
Bit of PTFE on the head will do the trick lol
Cyma screwed my build, when they put glue on the front, they didn't glue the adapter to the gun, but they did glue the adapter to the muzzle brake so I couldn't access the grub screw whatsoever no way to grab no way to twist absolutely appalling CYMA SHOULD BE ASHAMED OF THEMSELVES luckily I've already rethreaded a few guns so I already have proper threading to fix this bullshit but big middle finger to CYMA
Rip people who lost some screws
That is not a fast spring change how tf can the store say this…
It could be that the newer version has a quick change spring system in the back of the gearbox, it's still not accessible without lifting the gearbox. Pheas
Not full disassembly
Hiya. What do you feel is missing from the disassembly? Pheas
@@PheasAirsoft the dust cover
But to be fair I didn't found a single disassembly video where someone did that
@@jefferu2577 I think it's mostly because there is nothing to them in this style. It's just a metal rod with a spring on. The rod is detached from the button that releases the cover and slides out backwards, then the dust cover can move towards the selected and comes out at the back. It just generally comes out so quick and easy they people don't spend time on it. Is it something you would want me to do a quick video on? Pheas
@@PheasAirsoft yes if you don't mind:)
@@jefferu2577 Yep, If you can give me a couple of days and I will sort one out for you! Pheas.
ok