Roasted Coffee Density

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ธ.ค. 2024

ความคิดเห็น • 17

  • @jcsouthard1830
    @jcsouthard1830 2 หลายเดือนก่อน

    Wow,loved the simple but powerful instructions in Roasted Density. One more tool to add checks and balances to your quality control!! Thank you, jc

  • @Poundy
    @Poundy 5 ปีที่แล้ว +2

    great to hear the simple stage gate for QC - if it doesn't meet the goal on-pipe then it gets stood aside for further evaluation. Easy day 1 check to do

  • @VirtualCoffeeLab
    @VirtualCoffeeLab 2 ปีที่แล้ว

    Thanks for your helpful educational videos. Will this density measurement range work with a coffee that has green low density score of 550? I'm wondering how green density differences from one cofee to the next might influence the roasted density results.

    • @VirtualCoffeeLab
      @VirtualCoffeeLab 2 ปีที่แล้ว

      I see you already addressed this around the 4:05 mark on the video. Thank you again for your video. So are these weights you present based on your experiences roasting the different types of coffee or are you using some sort of calculation based on the green coffee weight and density? Thanks again!

  • @vineshbissoon1310
    @vineshbissoon1310 5 ปีที่แล้ว

    Is it safe to say that as long as the roasted density is within those parameters then the coffee is acceptable .i have found two roasts measuring out the same 380gm/litre with one being in roaster a minute longer yet measures out the same

  • @the_original_mathwiz
    @the_original_mathwiz ปีที่แล้ว

    Can you tell us how to make the cylinder you use in video? Diameter of PVC, schedule of pipe and length. This would really be helpful. Thanks

    • @rudimassyn3015
      @rudimassyn3015 6 หลายเดือนก่อน

      I another video he said it was 50mm PVC pipe. Filll it up with 250ml water. Cut at the level of the water.

    • @the_original_mathwiz
      @the_original_mathwiz 6 หลายเดือนก่อน

      @@rudimassyn3015 I made one from a clear plastic amber colored medicine bottle. I filled it to 200ml and cut it off. It works great. Thanks for the response anyway.

  • @shanewilson2152
    @shanewilson2152 2 ปีที่แล้ว

    Enjoyed your video

  • @lemonchicken3740
    @lemonchicken3740 5 ปีที่แล้ว

    Dose the g/l vary depending on the type of roaster? UG 22 vs P5

  • @zenASDF
    @zenASDF 2 ปีที่แล้ว

    Would a shorter roast but with a higher end temp make a coffee more developed than the same coffee roasted for longer but with a lower end temp?

    • @kg-Whatthehelliseventhat
      @kg-Whatthehelliseventhat ปีที่แล้ว

      Hello, if I may...
      I believe low altitude coffee starts low and slow then ends high.
      High altitude can go hot fast then drops to lower heat towards the end.
      The high altitude can handle the heat right off the bat.
      The low altitude needs to be brought up to roast temp in an almost timid manner.
      You can't just blast low altitude with high heat right away.
      Usually high altitude = high density
      And low altitude = low density.
      I hope that helps. Please let me know if you experimented this way and if it worked for you.
      Check out the channel Virtual Coffee Lab. Mike is a great guy and will always answer questions

  • @osamaalharbi9859
    @osamaalharbi9859 3 ปีที่แล้ว

    I like your videos
    Thank you

  • @chefalbino
    @chefalbino 5 ปีที่แล้ว

    don't see, what i gain by messuring this parameter

    • @smecik1
      @smecik1 4 ปีที่แล้ว

      quick check on consistency?

  • @jpjay1584
    @jpjay1584 5 ปีที่แล้ว +1

    gm/litre??? guys, don´t try to be creative.
    it is g/liter