把圖拉進去後直接按queue prompt顯示以下這個,請問該怎麼處理? Prompt outputs failed validation CheckpointLoaderSimple: - Value not in list: ckpt_name: 'flux1-dev-fp8.safetensors' not in ['flux1-schnell.safetensors']
So it still has to be the original team strength bull, unfortunately, flux for some of the requirements of the graphics card is a little high, I can only through the mimicpc online to run flux, the details of the processing is really better than sd3, but I for some of the handling of fine-tuning is not yet very proficient, so flux to learn the road will be more and more long piles!
感謝😊😊
感谢博主的分享。🌹
你好。 好喜歡你的教學片段 十分有用 想問一下你用哪個app 去錄你的屏幕。
謝謝老師教的好好 "比心"
謝謝~
👍👍👍👍👍
想玩flux首先得有塊好顯卡...
Localization may be required. But I went online to run flux on Mimicpc and it was a good experience for the whole operation!
請問可以使用多於一個 LoRA 嗎🤔
可以,串聯起來就好了,不過目前只有現在這個 LoRA ,以後應該會有更多。
🌹🌹🌹🌹❤️❤️❤️❤️❤️❤️❤️❤️
dos显示 using pytorch attention in vae
不好意思,我也不知道這會造成什麼問題。
把圖拉進去後直接按queue prompt顯示以下這個,請問該怎麼處理?
Prompt outputs failed validation
CheckpointLoaderSimple:
- Value not in list: ckpt_name: 'flux1-dev-fp8.safetensors' not in ['flux1-schnell.safetensors']
Load Checkpoint 這個 node 有選擇正確的 checkpoint 嗎? 請確認是否將影片中所提到的 checkpoint 放到正確的資料夾,還有不同的 checkpoint 的使用方法不一樣,這個簡單版的 checkpoint 就只能用影片中提到的那個。
Flux的大火和sd3的失敗不無關係,真替stability捏把汗,先前釋出的sd3 medium據説訓練數據剔除了nsfw畫人體會出現奇怪的動作扭曲
Flux 是 stability AI 的人離職以後做的,真材實料。
So it still has to be the original team strength bull, unfortunately, flux for some of the requirements of the graphics card is a little high, I can only through the mimicpc online to run flux, the details of the processing is really better than sd3, but I for some of the handling of fine-tuning is not yet very proficient, so flux to learn the road will be more and more long piles!
@@Huang-uj9rt It seems like NF4 has slightly lower hardware requirements, but I'm still researching this part.
原來丟圖可以跑出流程喔!!!
那存json的意義在哪.....
之前還傻傻的1個流程配一張圖
分享給其他人,還有檔案比較小。
請問這個LORA可以給NF4跑嗎?
不知道,還沒測試,還在研究 nf4
老師,請問如何掉圖進工作流
把圖拉進去,不過那張圖必須在存圖的時候有把相關資訊寫進去才可以。
3060爆显存。。全退了
國外有用 8G 顯存跑,可以跑。不過還是建議 12G 顯存以上,會跑得比較順。
現在有解決方法,不過要等 comfyUI 更新 civitai.com/models/638572/nf4-flux1?modelVersionId=714092