How To Install LED LCD PDP TV Wall Mount Bracket 26"- 63" Tutorial | DIY |
ฝัง
- เผยแพร่เมื่อ 7 ม.ค. 2021
- Tutorial on How to install LED LCD PDP TV Wall Mount Bracket for TV size within 26" to 63"
#TVBracket
#TutorialFixTV
#HowToInstallTV
#TVWallMount
#DIY
#50inch
Drill Bit Size( Drill hole at the wall ):
Most fixing either use 8mm or 10mm drill bits size . In this video use 10mm drill bit size. Its also depend on your wall plug size.
* Led TV install in this video is 50 inch (SHARP Brand)
Top Search:
TV wall mount installation
Flat panel tv wall mount
Led lcd pdp flat panel tv wall mount
How to mount a tv on the wall
How to install tv bracket on the wall
TV bracket installation
Soporte para tv
Como instalar soporte de tv
Como instalar el soporte de tu TV
Cara pasang Bracket TV di Dinding
Cara pasang Bracket TV
Perkongsian yg menarik tuan👍
Thanks for watching!
Esperamos a ver cuándo colocabas la tele que lo q uno no se anima hacer jajaja pero igual bien gracias 🤗
That's true
Perdón por no mostrar eso en el video. Espacio limitado para grabar video.
tysm dude, very helpful :D
Youre welcome!Thanks for watching
Thanks for this video making.Its help me as guide to install tv bracket.Keep upload more DIY video.
Welcome!Pls subscribe for new video update
Instablaster...
Very helpful. Thanks😅
Thanks for watching! Kindly subscribe my channel for more video update.
Los aumentos de plástico, se deben de colocar en las barras verticales. Para aumentar la distancia y poder colocar las conexiones. Ya que al ser una base muy sencilla no hay espacio suficiente para las conexiones traseras. Instalación incompleta.
Yo tengo la misma base, sin colocar todavía y viendo el vídeo me sobrarían 4 tornillos gruesos q vienen en la bolsa y dos arandelas.
Es necesario seguir el manual de instrucciones del producto para la instalación. El ajuste depende del tamaño del televisor.
Siga las instrucciones de funcionamiento del producto. Algunos productos se suministran con tornillos juntos.
@@TonaziTube no entiendo...
necesito traductor de google
(Need Google Translate)
Se puede dejar solo los 2 tornillos de arriba en las bases del televisor?
¡Lo siento, señor! No recomendado
Good tutorial...
Thanks for watching!
That's wrong tutorial because he use the spacers into a washer.
Hola, con cuatro tornillos alcanza para cualquier tamaño de tele? O hay que ponerle más?
¡si! Ya es suficiente usar cuatro tornillos para cualquier tamaño de televisor.
yes! Already enough use four screws for any tv size.
How did you determine where to put those holes without checking for the location of studs? Or is the mount hanging on just drywall?
You need to measure the wall distance first before marking the holes.It depend on your wall distance where to places the TV.(centre position or not).Sorry for not shares the measurement process in this video as reference.
Wrong. Attach legs to back of tv first so you can then measure to the top of the tv and decide at what height to fix the bracket to the wall.
Missing tutorial
❤
@randiatmaja5476 😍
Hi, I have the same bracket as you. What did you buy that is not inside the package of wall bracket?
Hi!Thanks for watching.
I did not buy extra part from the package.Screw at tv panel(black colour)Im use back screw supply from tv suppliers.
Simple illustration of the practical knowledge of installing TV to wall mount!
Its Simple
Para que pantallas es ese soporte yo lo compre y no le quedo a la mía Samsung
En este video, el tamaño del televisor es de 50 pulgadas y la marca es Sharp
Those black rubbers go on the back of the TV not on the wall mount itself.
Thanks for advise
It's both , you can even put them on the back of the TV,it's fine
@epifanomoyojr9625 Thanks Sir!
Como se ponen los tornillos auxiliares de anclaje ya que mi desarmador no llega para atornillarlos .
necesita una punta de destornillador de extensión flexible.
Those small screws that you used installing legs at the back of your plasma did they come with the brackets or plasma
That screw is original from TV supply.You can get from TV stand leg.Its same size.
@@TonaziTube I bought mine there are no screws, I have to go back and complain...Thank you
Sorry for that! Hope can get the screw.May be also can search at hardware shop
Can i mount my 49 " tv on it and. How is the quality ? Of this product
Hi!Thanks for watching.Base on specification this bracket can support until 63”.In this video , tv size mount is 50”.So far the quality is good 👍🏼.Already use more than 1 year without any issue.
Una pregunta y también se puede cambiar de altura es decir se puede bajar con los huecos qué tiene la base?
Sí, puede cambiar la altura del televisor moviendo el orificio del soporte. La altura depende de la distancia del televisor y la posición del área.
@@TonaziTube mucha gracias
Una duda para que lado va las garritas que van al televisor las que encajan en la pared? Son hacia arriba o hacia abajo
lado superior
Hacia arriba
Gracias por ver
Thanks. I bought the same brand from Walmart for $14. I paid to have both options: tilt and straight. Unfortunately, the tilting device had to be removed in order for the entire bar to fit, which defeats the purpose of purchase. You get what you paid for.
Thanks for watching and sharing your experience.
Los cauchos de la parte de atrás del tv es necesario poner donde del soporte
Osea los aumentos
Si , es necesario colocar una goma si tiene
Yes you need to place a rubber is have
Thanks pretty cool by the way this size is already ok to 50 inches tv correct me if I'm wrong?
TV size in this video is 50 inch.
@@TonaziTube oh thanks
Welcome 🤗
Good morning....
Good Morning..Thanks for support
Compré ese soporte pero es muy débil, casi le doblo, si es seguro?
Haz la instalación correcta. Sería seguro.
Whats the size of the drill bit did you use to make the four holes on the wall?
Drill Bit Size( Drill hole at the wall ):
Most fixing either use 8mm or 10mm drill bits size . In this video use 10mm drill bit size. Its also depend on your wall plug size.
He visto varios videos de estas bases y en todos lo único que yo quiero ver es cuando cuelgan la tele en la base y ningún pinché video sale eso.. 🤦🏻
El ángulo puede tener un problema para mostrar.
👍🏻
Thanks for watching
El soporte es de buena calidad?
sí ! el soporte es de buena calidad.
(Yes! The support quality is good)
What size are the screw you use to put the bracket on the wall
Hi!Thanks for watching.
The wall screw size is 9.8mm Head diameter and 50mm length.
Bueno el video pero deberias haber filmado cuando instalas el tv para ver el detalle
lo siento, el espacio es limitado para la grabación de video.
mejorará aún más
Que tipo de tornillos usa?
Sorry!Please comment in English
There only 2 holes for wall mount screw at yhe back of the tv. Is that okay?
It not recommended.Worry not strong enough bracket hold the tv weight.
Tqq😭
Que tipo de broca es ?
Siempre es mejor utilizar brocas para mampostería o tornillos con punta de diamante para hormigón.
Buescando raks q cuelguen del techo
posible encontrarlo en la tienda online.
What size drill bit?
Its depend on your screw size.Pls measure your screw diameter.
Good video butLast wall fitting not ceared
Thanks for watching! Sorry for that Sir.
Como coloco último parafusos que coloca em baixo
você precisa instalar do lado inferior do ângulo da tv
Is this size OK for 32 inch TV?
Yes ! Can fit to 32 inch.This bracket suitable for TV size range 26 inch to 63 inch.
Can the tv be mounted on MDF Sheets?
It depend on the board condition.If strong and sturdy ,it can be use
@@TonaziTube Thank you
Welcome Sir
How do you put the last 2 screw
You need long screw driver or tool to fix it.
Sir my stand screws are miss place please guide me what i have to do now
Mostly tv screw are common type with other brand.You may search nearby tv shop or hardware shop to buy a new screw for replacement.
Para una tele de 65 Pulgadas ¿ se podra?
Basado en la especificación del soporte, solo admite hasta 63 pulgadas
Es fácil de instalar pero lo más importante no te lo muestran en el video
Lo siento por no mostrar todo en el video.
Puede consultar el manual de instrucciones del soporte más
@@TonaziTube no viene con manual y es el mismo que mostraste
Yong screw na kasama as pag bili ng TV nawala po saan po mkaka bili?
maaaring gumamit ng orihinal na tornilyo mula sa tv. Maaari ring bumili ng online shop o tv shop
Para colgar una daewoo?
Sus pasos son similares para otras marcas de televisores como Daewoo.
what is brand of your tv?
“SHARP” brand
What’s the big screw for at the end?
You may refer step 3 diagram in video.Screw at bottom of bracket.
How many kg this bracket can hold.
Load capacity: 100lbs(50Kg)
What drill size that fit with wall plug that come with the bracket?
@takanome9521 Using 10mm size
Is it possible that the tv fells off ?
Depend on method and way of installation.If wrong drill hole and wall plug use may cause tv fells off.
I bought this and the screws is to small for the back of my tv I need some help
For some TV model, bottom leg stand of the tv have a screw and can fit to the back of tv.Please check your tv model.
@@TonaziTube i've got the same problem and the screw from the leg doesn't fix.
Need to check your tv screw size.What type of screw use.May be can get at hardware or TV repairing shop.Below link as example of tv screw type.
shopee.com.my/product/503190764/4596959290?smtt=0.44896870-1656392248.9
como coloca la tv entonces??..🤔
Lo siento por no mostrar el lugar del televisor, es necesario colocar la ranura del soporte. siguiente atornillarlo.
por favor siga el manual del producto
@@TonaziTube no viene con manual
Can it fit 55 inch
Base on specifications, it can support until 63 inch
is this size applicable for 24 inch tv? thanks
Sorry ! Base on specification, only support tv size range 26 to 63 inch only.
Pwdi ba yung Ganyan sa Samsung 32 inches
Hi! Thanks for watching.This bracket can support 32 inch tv
Al ultimo no entendi ayuda
Puede consultar el diagrama de instrucciones de la caja.
What size of your tv sir ?
Led TV install in this video is 50 inch (SHARP Brand)
@@TonaziTube okay tq for info sir
@mhydra4247 You’re most welcome 🤗
what is the size of drill bit plzz
You may refer at video description.
Drill Bit Size( Drill hole at the wall ):
Most fixing either use 8mm or 10mm drill bits size . In this video use 10mm drill bit size. Its also depend on your wall plug size.
How to Use drill Bit No. Please say
Already mentioned in description for drill bit size.
What happens if I don't put the last two screws?
Okay but not lock the TV angle to avoid accidently move.Recommended to apply screw for locking the tv bracket from falling down.
Anu size ng drill bit mo sir
Most fixing either use 8 mm or 10mm drill bits size (Wall hole). In this video use 10mm drill bit size. Its also depend on your wall plug size.
Sir same type stand fit in hisense 50inches TV plez Replay me
Hi ! Base of product specification, bracket can stand/fit until 60” lcd TV size .(Any brands)
You can adjust the bracket base on screw hole of the TV backside.
Hope it might useful.
Base on video, Fit to 50” SHARP Brand
El último tornillo que ajusta de abajo para que sirve? Es muy corta la imagen y a poca distancia no se entiende y parece importante
El último tornillo es para bloquear entre el soporte del televisor y el soporte de la pared, siga el paso 3 en el video. Puede consultar el tiempo del video 4:54 para el PASO 3 para ver el diagrama.
The last screw is to lock between tv bracket and wall bracket follow step 3 in video.You may refer video time 4:54 for STEP 3 for diagram.
Que diámetro es el tornillo
lol the last video for screw underneath is out of the blue.. like how do you even screw it while the view was so open 🤣 like you screw it before install the tv on the wall
The screw method is the same.Difficult to show under the TV view (bottom view)for screwing process.
The black spacers go on tv not on wall bracket
Both works
como lo saco??
Estoy comprando en la tienda en línea
You didn't show how you put up the TV on the bracket 🙁
Thanks for watching Sir!Sorry for that which are not included in the video.
D naman pinakita ung pag assemble enebeyen
Thanks for watching!Sorry for the missing video step
46
✅
Es muy débil ese soporte
depende de la calidad del producto.
Compré el mismo y siento que se romperá si aguanta de 55"?
No se preocupe, puede admitir 55 "para realizar la instalación correcta
No entendí nada
repite viéndolo. ¡Seguro que puedes!
tak faham lah step ke tiga tu
Step ke tiga perlu skru angle di bawah TV.Susah nak tunjuk sebab terlalu gelap dan sempit untuk di rakam video.Hanya buat simulasi .
No sirve se dobla facil
depende de la calidad del producto,
la mía está bien, no te doble
P
Thanks for watching
ض
Thanks for watching
Thu
🤗
Wrong, made me make it the wrong way😢
What wrong?
The plastic circles must be on the vertical bar to increase the distance of the tv from the wall
pure bs 🤣
🤗
You fitted it wrong
Which part?
Hello, I'm having a problem installing mine
What issue Sir?
Black screw washer install?
Use screw washer provide by TV supply.
Poda punda
Enna atu
Wrong
Thanks for watching