I Made A Flying Beyblade- & Other Insane 3D Printables

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 352

  • @JettKuso
    @JettKuso  2 หลายเดือนก่อน +40

    Click here to get the A1 Mini Combo! shareasale.com/r.cfm?b=2420414&u=4262224&m=138211&urllink=&afftrack=

    • @hollynelson2449
      @hollynelson2449 2 หลายเดือนก่อน +1

      Question would I be able to make this if I bought this 3-D printer

    • @JettKuso
      @JettKuso  2 หลายเดือนก่อน

      @@hollynelson2449 I’ll be putting my custom designs on MakerWorld soon, so yes.

    • @AlphaRaptor3000
      @AlphaRaptor3000 2 หลายเดือนก่อน

      Ever thought about creating 3D Printed Bakugan including ones that never got released to the public but were only shown in the anime or games since I seen a lot of people made like 3d printed Bakugan like
      Silent Naga
      Leonidas
      Omega Leonidas

    • @Nerofromyeeps
      @Nerofromyeeps 2 หลายเดือนก่อน

      @@JettKusocan you link the bits you 3d printed here because I tried the one in the comments and it didn’t work plus it didn’t have supports so if you could explain or link the right one it will be greatly appreciated

    • @yoyobird8427
      @yoyobird8427 2 หลายเดือนก่อน

      you didnt reverse the spin again on the last one just to see if that worked better?

  • @coolforall6215
    @coolforall6215 2 หลายเดือนก่อน +484

    You clearly just need to get one of those Life size anime stadium and try again

    • @JettKuso
      @JettKuso  2 หลายเดือนก่อน +81

      this is the secret

    • @Ghost-go4hs
      @Ghost-go4hs 2 หลายเดือนก่อน +19

      next video my backyard is a bayblade arena

    • @darknessblades
      @darknessblades 2 หลายเดือนก่อน +10

      and have it be 3D printed

    • @hekusblaze7042
      @hekusblaze7042 2 หลายเดือนก่อน +11

      @@JettKusoI personally use a satélite dish, it works wonders and it is epic if you have modded launchers to make them faster to better traverse the bigger arena and fights are just explosive

    • @narrativeless404
      @narrativeless404 2 หลายเดือนก่อน

      Lmao

  • @leftygurl
    @leftygurl 2 หลายเดือนก่อน +310

    close enough, welcome back ninjago airjitzu spinners

    • @Nugget111uh1
      @Nugget111uh1 2 หลายเดือนก่อน +11

      Honestly, if you properly balanced and weighed it, giving it a soft forward leap as you pull the cord, I could totally see this being used as a gliding "technique" for the Ninja. Pretty sure they've almost always used Spinjitsu for short glides or quick jumps, so it's not absurd that they'd randomly remember "oh yeah, Airjitsu!"

    • @jbh269
      @jbh269 2 หลายเดือนก่อน +17

      i think you mean bionicle rhotuka spinner

    • @bigfan10-gaming79
      @bigfan10-gaming79 2 หลายเดือนก่อน +7

      @@Nugget111uh1 Apparently "Way of the Departed" revealed that Airjitzu is "Edo Magic" which weakens Elemental Ability

  • @thedog-random
    @thedog-random 2 หลายเดือนก่อน +195

    Jett has gone into the age of Beyblades

    • @jaywhy7150
      @jaywhy7150 2 หลายเดือนก่อน +7

      Who could blame him

    • @quandaledingleofficial6
      @quandaledingleofficial6 2 หลายเดือนก่อน +18

      @@jaywhy7150 Yeah who could blame him because look how bakugan is doing rn.

    • @jpuc5568
      @jpuc5568 2 หลายเดือนก่อน +7

      @@quandaledingleofficial6bakugan is so dead rn idk wtf they were thinking I hope they actually reboot it again

    • @quandaledingleofficial6
      @quandaledingleofficial6 2 หลายเดือนก่อน +3

      @@jpuc5568 spin master only cares about paw patrol. thx god we have hasbro

    • @blurryperson2685
      @blurryperson2685 2 หลายเดือนก่อน

      Yeah x is fun. It's got me to play again as an adult ​@@jaywhy7150

  • @loganstynes8738
    @loganstynes8738 2 หลายเดือนก่อน +71

    GOTTA combine the smaller propeller with the screw bit, so it can jump into the air AFTER the first launch!!!

    • @bigfan10-gaming79
      @bigfan10-gaming79 2 หลายเดือนก่อน +6

      Ah so a Take Off combination

  • @toast_channel
    @toast_channel 2 หลายเดือนก่อน +49

    Glad to see my design in your video! (big fan btw)
    I made a 3D printable Optimus Prime kit as well recently, let me know if you want the files!

    • @Kasstiron741
      @Kasstiron741 2 หลายเดือนก่อน

      Toast :)

    • @Maruchipawa
      @Maruchipawa หลายเดือนก่อน

      TOASTER

  • @UnderTheSkin13
    @UnderTheSkin13 2 หลายเดือนก่อน +40

    The fact that it actually generates lift is impressive!

  • @star_seraph
    @star_seraph 2 หลายเดือนก่อน +12

    Gotta thank you for your last Beyblade video. I wouldn't've come across Beyblade X without it! And now I'm obsessed.
    On a more personal note, that quote "Marketed to boys of all ages and genders" hit me in the frickin' soul!

  • @average_internet_dweller9750
    @average_internet_dweller9750 2 หลายเดือนก่อน +18

    This is literally the irl equivalent of video game mods that add features left out by the developers, which blows my mind. Also I totally thought you were gonna back into traffic at 11:49

  • @gtafan110010
    @gtafan110010 2 หลายเดือนก่อน +79

    this was absolutely an add..... but printing beyblades IS cool

    • @nanoman172
      @nanoman172 2 หลายเดือนก่อน +7

      I mean, I would do an ad too if it meant I got a free Bambu printer, those things are pricey

    • @SLVYER1
      @SLVYER1 2 หลายเดือนก่อน +1

      I can't wait for a video where he makes the heaviest beyblade possible, because that's going to be the first TH-cam video where someone dies.

  • @diskdem0n
    @diskdem0n 2 หลายเดือนก่อน +49

    have you finally gotten into plastic generation and got the missing piece for dranzer

  • @cecillewolters1995
    @cecillewolters1995 2 หลายเดือนก่อน +4

    Thank you JettKuso for introducing me to the world of Beyblade X!
    The hobby grabbed me hard and I already have 8 beys, waiting on more ^^'
    Best part is that I started a local community together with my local gamestore and last Wednesday a few of us came together and we all battled against other bladers for the first time, it was an amazing experience :D
    So if anyone lives in or near Drenthe in The Netherlands, feel free to join :)
    Thanks again and have a nice day, bye~

    • @JettKuso
      @JettKuso  2 หลายเดือนก่อน +1

      Beyblade X is a very very good community hobby. My experiences so far have been incredible.

  • @88Spint
    @88Spint 2 หลายเดือนก่อน +1

    Can't think of too many hobbies where 3d printing fits more then competitive plastic toys :D Absolutely love it! Made me wanna look into Beyblades :D

  • @mysticmind4563
    @mysticmind4563 หลายเดือนก่อน +2

    They possibilities for custom bey part us impressive. However, when you said Bionicle pieces that hit me right in the nostalgia. Btw if they ever make another Beyblade anime, I hope that they reference you as a devoted fanatic that inspired things such as custom launchers, display cases and other accessories.

  • @BugsyFoga
    @BugsyFoga 2 หลายเดือนก่อน +24

    Once again, 3D printers show how crazy they can get when creating things

  • @kr0nekxg347
    @kr0nekxg347 2 หลายเดือนก่อน +14

    13:18 ITS WORKING THO!! THATS SOO TRIPPY

  • @kenji6492
    @kenji6492 2 หลายเดือนก่อน +5

    This was an excellent sponsor spot. Glad you got to run wild with the machine!

  • @tyrant5337
    @tyrant5337 2 หลายเดือนก่อน +1

    Please keep making beyblade content , this is unironically some of the best beyblade content and it’s made by someone relatively new to the community

  • @Blanktheposer
    @Blanktheposer 2 หลายเดือนก่อน +16

    We need more Beyblade videos

  • @-phrog-
    @-phrog- 2 หลายเดือนก่อน +1

    The fact that it actually hovers in and does so fairly well is really cool

  • @juserfan9089
    @juserfan9089 2 หลายเดือนก่อน +2

    Awesome Video! :3
    I really liked how they final bey could jump, it made me thing that a spring tip could maybe be extra fun, maybe it could jump a little more :3

  • @archeogaming
    @archeogaming 2 หลายเดือนก่อน +1

    JettKuso I just found out about your channel for the first time checking out Beyblades and I am in love with your content! Keep it up man that’s great stuff.

  • @Draiconicbro21
    @Draiconicbro21 2 หลายเดือนก่อน +8

    Where would I be able to get one of the mini trypios you made? I would love to have one mainly because it floats but doesn’t fly out of the stadium like the big one

  • @whitewolfworld9842
    @whitewolfworld9842 21 วันที่ผ่านมา

    Keep developing this!! This is major to think you got the lift and its playful! Please just build the 90s anime stadiums to then test it in, FULL SIZE!! ;)

  • @PMGangsta
    @PMGangsta 2 หลายเดือนก่อน +1

    That's so awesome dude. Seeing you put so much effort in is great to watch!

  • @Skiwii45
    @Skiwii45 2 หลายเดือนก่อน +2

    I wasn’t expecting to see my display stands when I clicked your video. Happy to see you liked it, I really appreciate the support 😁

    • @JettKuso
      @JettKuso  2 หลายเดือนก่อน +1

      They’re so good!! Thank you for making cool stuff for the community

  • @stephonhicks5129
    @stephonhicks5129 20 วันที่ผ่านมา

    This dude is nerdy as idk what . . And I'm HERE FOR IT!!! keep at it brother!

  • @ABean56
    @ABean56 27 วันที่ผ่านมา +1

    Toast resin printed a functional mini toilet, that made me start watching him, oh yeah I started watching him before this, both amazingly creative channel

  • @WIImotionmasher
    @WIImotionmasher 2 หลายเดือนก่อน

    So I never was into Beyblade at all
    I'm nearly 30 , and I've been watching Beyblade X's anime each week as episodes come out. And have been thinking "Man Beyblade's pretty cool" lol
    I'm glad to hear the new toy series for Beyblade X is spawning such excitement, it's not just me getting pulled in.

  • @NonJohns
    @NonJohns 24 วันที่ผ่านมา +1

    I just have to say, 200 bucks for a printer as well kitted as this is really insane as someone who bought a cheapo $130 one
    70 is not a bad upgrade for a smaller plate but convenience and reliability
    Which you'd be spending anyway to make the cheapo unit to be more convenient and reliable (or time spent tinkering)
    3d printing is definitely worth the upfront costs to prevent getting demotivated and owning a dust collector

  • @p2mhp917
    @p2mhp917 2 หลายเดือนก่อน +13

    Dude if you made an video 3Dprinting real size bionecle mask i will for sure buy this neat printer FRr! I love masks!!

    • @linkeroniw
      @linkeroniw 2 หลายเดือนก่อน +2

      there's a channel called frankly built that did a video on that a while back, he has lots of other cosplay things as well

    • @p2mhp917
      @p2mhp917 2 หลายเดือนก่อน

      @@linkeroniw Ohhh thanks!! i will check this out! ;)

  • @jonathanventura9183
    @jonathanventura9183 8 วันที่ผ่านมา

    i feel like a bearing tip in conjuction with the flying ring might be a potential combo. to add weight i think you should honestly make the middle bit capable of holding some coins that stack and any rings. that way you can give it enough weight to not instantly die.

  • @JosephJoestarPants
    @JosephJoestarPants 2 หลายเดือนก่อน +8

    0:27 "FAN-made" i see what you did there🤔

    • @YofuwProd
      @YofuwProd 2 หลายเดือนก่อน +1

      its sad how I didn't notice at first

  • @krittip14
    @krittip14 2 หลายเดือนก่อน +1

    After you did this experiment, I understand now Tommy was right to cancel Trypio blade and came with DB and E bits instead 😂
    Maybe you can try to make a Bit that has a propeller larger than blade

  • @enderdude7
    @enderdude7 2 หลายเดือนก่อน +1

    You should add the screw but so it jumps and kinda flies by itself or at least hover.

  • @nethanielpetrillo9537
    @nethanielpetrillo9537 2 หลายเดือนก่อน +4

    Those looks very nice for custom made, 10/10 for this video

  • @JollyMecha
    @JollyMecha 2 หลายเดือนก่อน +4

    frigging awesome, i love your vids, your enthusiasm makes my day

  • @metauniverse8028
    @metauniverse8028 2 หลายเดือนก่อน +1

    What would be wild with this is adding metal fight’s Storm Capricorn quake tip mechanic to make this beyblade continually “hop” and avoid the opponent while jumping and staying in the air.

    • @icefinch
      @icefinch 2 หลายเดือนก่อน

      Not 100% sure if it would work but might be able to set a straight tip inside of a shell with little side bits in the tip so the tip wouldn't fall out and set up a empty section in the middle of the tip with a spring set in there so when it hits the stadium it would bounce.

  • @morallygary9098
    @morallygary9098 2 หลายเดือนก่อน +1

    It’s like storm Capricorn on steroids- functions as advertised but objectively awful as a result. Love it

  • @xonjurethewarlock2413
    @xonjurethewarlock2413 2 หลายเดือนก่อน +1

    How does this not have more views.
    Also, i propose if you were to size it down. Just a tad bit more and tweaking the design to include the weight of a metal layer. You may be able to, given the extra weight and the design update, make it a viable hovering x bey. Shit, I wouldn't be surprised if the marketing team from beyblade x hasbro contacted you already.

  • @jakeilano6821
    @jakeilano6821 2 หลายเดือนก่อน +1

    6:51 I liked the 3D printed double string launcher and 7:31 the display holder for the Beyblade.

  • @goldsocks9999
    @goldsocks9999 หลายเดือนก่อน

    After watching this for the 10th time (plz do more beyblade videos i love them), a propeller beyblade x could work theoretically, like if it was the ratchet or less prominent on the blade, having a bey that acts lighter than what it really is would be facinating to see

  • @bigfan10-gaming79
    @bigfan10-gaming79 2 หลายเดือนก่อน

    Yeah The Scenes from the Metal Fusion Episode when Madoka accidentally switched Dark Bull and Flame Saggitario's Spin Tracks leading to Benkei and Kenta trying out different part combos where so cool, They'd show the Beys Splitting apart and the new part sliding into it's Place

  • @plaarwnleelrl
    @plaarwnleelrl 2 หลายเดือนก่อน +2

    The test battles remind me of trying to beyblade with parents and having them fail to launch properly.

  • @ninjacats200
    @ninjacats200 2 หลายเดือนก่อน +1

    I have a 3D printer I've been using for a few years now. When I got into Beyblade X the first thing I printed was a custom grip for the launcher. It's so nice. The next thing was I only have one string launcher and one normal launcher. But I had a few proto launchers from the marvel colab and the 2 starter kits I got. So I printed a double proto launcher holder. It works well but its hard to test them if I was in a real battle with the other person using a normal launcher. I wanted to get the Japan stadium so I got the battle stadium that comes with Wizard rod and one other bey along with 2 normal launchers. So once that comes in I'll print another grip and something to launcher both at once. Cannot wait for that to come. I also cannot wait for wave 3 and for the Star wars collab.

  • @Kidwaizer
    @Kidwaizer 2 หลายเดือนก่อน +1

    I can't believe I literally got fed a 15 minutes ad and I liked it

  • @Ahhhahhaha
    @Ahhhahhaha หลายเดือนก่อน

    for the rolling ball bit, could you put a metal bearing in instead? print it 2 intervals. I wanna see what that does ahah, dope vid.

  • @gamemaster4947
    @gamemaster4947 หลายเดือนก่อน

    I just got back into metal fight last year after being obsessed with it all of my childhood. The sad part is that there are no more metal fight tournaments that go on in my area, and no one else has them, so the fun of battling others is gone.

  • @Aldo.flores
    @Aldo.flores 2 หลายเดือนก่อน +1

    No way, I had many blades on my childhood but trypio was one of my favorites despite it won’t fly I enjoyed so much launching from the second flow trying to make it fly, even years after on my first years at engineering designed in rhino an upgraded version but it needed more power to really works so designed an electric launcher, but now this toroidal helix design change it all and make it way cooler than it was!, there are many Japanese fans that make really fast and dangerous blades, I can imagine this with those ones impressive speeds and it might put this game in a whole new level

  • @gjhc1990
    @gjhc1990 2 หลายเดือนก่อน

    What if you printed the top with the propeller the other way around si it pulls it down, and you used the helicoidal tip that makes it jump? When it jumped, it would go back down very fast (hopefully on top of the other beyblade)

  • @paille-boy
    @paille-boy 2 หลายเดือนก่อน

    tbh that would be hecking epic to have irl beyblade matches with big stadium and stuff... seemingly we are very close to that! we can just fight more and more advanced design of beyblade and strategy together!

  • @SmexiiWade
    @SmexiiWade 2 หลายเดือนก่อน +2

    Subbing!!!! I'm so excited to see whatever you produce next man!

  • @xscitobor1233
    @xscitobor1233 2 หลายเดือนก่อน

    I would like a video on how you learned the 3d modeling program you used and all the prototypes you made/changed while making the flying beyblade

  • @JuanAcosta15X
    @JuanAcosta15X 2 หลายเดือนก่อน

    My favorite 3D-printed Beyblade parts are the level chips for the beys of the Turbo/Cho Z system. They’re such a simple part that can improve a bey’s performance a lot but Takara Tomy locked the official ones behind very high costs. But thanks to 3D printing you can have basically the same thing for less.

  • @mctheprotagonist569
    @mctheprotagonist569 2 หลายเดือนก่อน +1

    you should put the smaller version of the flying beyblade on the quake bit so it hops around the stadium more

  • @teddiandersson6744
    @teddiandersson6744 2 หลายเดือนก่อน

    Ok but What about combining you smaller fan spinner top with the spiral ratchet bit?! Theoretically you could get som decent airtime multiple times throughout the match, instead of only during launch. I'd love to see what that would look like in practice.

  • @mechakinggidora
    @mechakinggidora 2 หลายเดือนก่อน

    Dude...with the small one, use the plastic design and put it into a sand mould. Then melt some metal down in a crucible to make the metal ring. I'd be so incredibly hyped to try and make a metal version of that

  • @Phantom3616G
    @Phantom3616G 2 หลายเดือนก่อน +2

    I would say making your own beyblades is very creative but what about your own bakugan sets with those certain character that didn't get to be made as toys in the market but in that area you would have make adjustments on making it fold into a ball or sphere shape of that bakugan

  • @kakalis2323
    @kakalis2323 2 หลายเดือนก่อน

    Ooooo yeah baby. Getting that fo sho.
    After I catch up on all the beys I missed during my recent beyblade hiatus
    HMS too. Gonna be printing me a ton of HMS parts

  • @smnio5619
    @smnio5619 2 หลายเดือนก่อน +2

    11:30 Angel Trypio

  • @PolishBigfootCircle11
    @PolishBigfootCircle11 25 วันที่ผ่านมา

    Watching that bey slowly fall is so mesmerizing!

  • @EmeraldSpencer
    @EmeraldSpencer 2 หลายเดือนก่อน +1

    It might work if you could somehow modify it to take metal parts from a past gen (my first thought was from plastic, but a metal fight fusion wheel might also do the trick if implemented correctly) to add the extra heft it needs.

  • @chocofro3
    @chocofro3 2 หลายเดือนก่อน

    I have watched a great many videos about 3D printing and never once wanted a 3D printer until now. I still have my OG Beyblades but I would love to make my own.

  • @nicodalusong149
    @nicodalusong149 2 หลายเดือนก่อน

    Huh, that smaller version would work real well with that tip that makes the bey jump. The whole tactic would be to play keep away by trying to stay airborne as much as possible. So, very much a stamina type beyblade.

  • @spyderexe2324
    @spyderexe2324 2 หลายเดือนก่อน

    You should try using a resin printer for higher resolution prints when strength doesn't matter

  • @PCBWay
    @PCBWay 2 หลายเดือนก่อน

    This is so GOOD!

  • @borowiecz9534
    @borowiecz9534 2 หลายเดือนก่อน +2

    11:55 2024 mustang gt on the background tho lmao

    • @kiefervandenberg
      @kiefervandenberg 2 หลายเดือนก่อน

      Look more like the s550 than s650 gt

  • @br117p7
    @br117p7 2 หลายเดือนก่อน

    What if you do the same except it being a reverse spin bey, and also try adding some texture to steal anergy from normal spinning beys?

  • @phantomV630
    @phantomV630 2 หลายเดือนก่อน

    3:30 Yes they have done that beyblade x quake bit and beyblade burst operate driver

  • @skoubidou00
    @skoubidou00 2 หลายเดือนก่อน

    what is the music used from the meme "it sucks" highlight ? :)

  • @ventikazamiaudios
    @ventikazamiaudios 2 หลายเดือนก่อน

    This rlly makes me wanna see you talk about those 3d printed bakugan that have started being made

  • @Datcajunboi
    @Datcajunboi 2 หลายเดือนก่อน +1

    These videos are awesome

  • @Frost_Tiger
    @Frost_Tiger หลายเดือนก่อน

    need to add weight on the tip 3 of the tip of trypio or where the sudo weight disk is at to really get it working

  • @RaghunathTambde
    @RaghunathTambde 2 หลายเดือนก่อน

    I had an idea. How about making only using rubber tip just like the one uses in Pegasus and make the Beyblade a combination of plastic with metal so that it gets enough weight to continuously jump everytime it lands

  • @zarlus8
    @zarlus8 2 หลายเดือนก่อน +1

    As an og Trypio owner I can tell you the top is a massive gimmick. It's one of the worst blades out there because of its size and the downward force reducing spin longevity.
    It is one the the most visually impressive tops and seeing this gyro implementation is really neat.

  • @forbreakingdown1109
    @forbreakingdown1109 2 หลายเดือนก่อน

    I would love to see trypio wings shoot upward instead of downward.
    Probably gonna be one of the best destabilizer layer/blade and i also thought thats how maximum garuda works in burst.

  • @King_Pig69
    @King_Pig69 2 หลายเดือนก่อน

    I’ve been waiting for the hexbug comparison video, why haven’t you made that video yet?!

  • @ebmario874
    @ebmario874 2 หลายเดือนก่อน

    Loving these beyblade videos!

  • @abdelali9279
    @abdelali9279 2 หลายเดือนก่อน

    Wait, so if you put the blade backwards would it shoot down directly to the arena?

  • @teoinanutshell2314
    @teoinanutshell2314 2 หลายเดือนก่อน +1

    9:36 bro plays cyberbug 1987

  • @sergioontiveros4984
    @sergioontiveros4984 21 วันที่ผ่านมา

    What about making the same design but in reverse causing it to push air up and stay more grounded and possibly harder to get thrown around?

  • @TheMightyRuneStone
    @TheMightyRuneStone 2 หลายเดือนก่อน

    My first and favorite Bey was called Phantasus (can’t remember how to spell) and it was a BEAST!!!!! He dominated every battle until new beyblades entered the house and over usage. Now he’s a relic of an ancient past. I even sent a letter to Hasbro asking if they could make a custom beyblade for me called Nitro Nocue, where he could (somehow) change directions mid battle, without losing much momentum and speed. What a stupid boy I was.

  • @billykid6745
    @billykid6745 2 หลายเดือนก่อน

    This would probably work better if you used a taller middle part (the part that connects the tip with the main body). So as to be taller and the wings don't get hit as much

  • @jesuspool5675
    @jesuspool5675 2 หลายเดือนก่อน

    Any thoughts on 3D printed hexbugs and custom tracks for hexbugs and hotwheels? 👀

  • @MagmaIfrit04
    @MagmaIfrit04 2 หลายเดือนก่อน

    The way metal needle would actually be good for this kind of combo
    Also try putting 7-60 on it

  • @James09892
    @James09892 2 หลายเดือนก่อน +1

    As someone who is way too much into aerospace engineering even though I’m not an aerospace engineer, hearing him call lift thrust hurt me to my core

    • @JettKuso
      @JettKuso  2 หลายเดือนก่อน

      **puts on my well-worn dunce cap**

    • @James09892
      @James09892 2 หลายเดือนก่อน

      @@JettKuso Hey it's all right, we all make mistakes.

  • @multiversalblader
    @multiversalblader 21 วันที่ผ่านมา

    When are you gonna finish the Flypio design?

  • @Justadude780
    @Justadude780 2 หลายเดือนก่อน

    I’m currently 3d printing my own beys for burst, it’s super fun!

  • @dustinfaulkner5970
    @dustinfaulkner5970 2 หลายเดือนก่อน

    One thing I tried was looking back at the metal series or even beyblade burst. What beys where really good at stamina? The ones with all the weight on the outside almost like a bicycle wheel or similar. So I printed out a disc where all the plastic was out on the end with small supports and it does really well against burst beys without being as heavy as some other beys. Might be something to try. I guess the closest would be like Garuda but beef up the outside ring and use less material closer to the center. \

  • @cheoplays6477
    @cheoplays6477 หลายเดือนก่อน

    How many of those ring things are you able to add to the flying beyblade before it is too many to fly

  • @onerian8178
    @onerian8178 2 หลายเดือนก่อน

    maybe if you added metal weights to the tips it could increase stability and duration and allow it to slowly hover down.

  • @blueblaze7312
    @blueblaze7312 2 หลายเดือนก่อน

    1. Use a life size stadium.
    2. This is a GIMMICK Beyblade. Use something like Quake. The jumping bit?

  • @coledavidson5630
    @coledavidson5630 2 หลายเดือนก่อน

    5:27 hold up. Where'd you get the files for these

    • @Kokin0
      @Kokin0 2 หลายเดือนก่อน

      Probably on thingieverse

  • @switchbro6622
    @switchbro6622 2 หลายเดือนก่อน

    How do you make supports for this stuff

    • @JettKuso
      @JettKuso  2 หลายเดือนก่อน

      BambuStudio auto-generates em

  • @jorgecegarra169
    @jorgecegarra169 2 หลายเดือนก่อน +1

    Soo when will you 3d print bakugans?

  • @MTI_beyblade
    @MTI_beyblade 2 หลายเดือนก่อน

    This is the Trypio I didn't know I needed 🤣 W video

  • @amirullfadzli1310
    @amirullfadzli1310 2 หลายเดือนก่อน +1

    Now all we need is some genius to make gill scorpion's Quick Loading Core in Core change system or emblem charge system b daman

  • @prathambansal5585
    @prathambansal5585 2 หลายเดือนก่อน

    It will be knocked out pretty easily
    Interested to see the results when you invert the disc and make the bey stick to stadium surface

  • @Mattzere
    @Mattzere 2 หลายเดือนก่อน

    This reminds me of a lego ninjago thing that came out when I worked in the lego store. I got so good at using those, I could make them hover in place or aim them across the store... that was a fun job.

    • @D1ngus10
      @D1ngus10 หลายเดือนก่อน

      The airjitzu spinners right?

    • @Mattzere
      @Mattzere หลายเดือนก่อน

      @Belial143 yeah, that's the one!

  • @MysticFactorGodo
    @MysticFactorGodo หลายเดือนก่อน

    3:44 I actually do think they would they haven’t ever really limited themselves on what they can and cannot do with a beyblade and it’s parts Vex Lucifer and Regelia Genesis are pretty good examples