Designing a Simple DIY Wallet (+Multitool Card)

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 พ.ย. 2024

ความคิดเห็น • 230

  • @MarkArnold-England
    @MarkArnold-England ปีที่แล้ว +495

    My experimentation with Capri Sun pouch seems to provide a cheap and simple way to block RFID without having to purchase specialist material. Certainly blocks my car's keyless entry well enough. Bonus is that you get a drink too!

    • @notanimposter
      @notanimposter ปีที่แล้ว +13

      I'll have to try this for my purposes

    • @Fuzzled369
      @Fuzzled369 ปีที่แล้ว +35

      We really are living in a dystopian sci fi movie

    • @MarkArnold-England
      @MarkArnold-England ปีที่แล้ว +3

      @@notanimposter I'd be interested to have confirmation that it works, it isn't something I've seen anyone else test. Feedback please!👍
      For clarity, it doesn't prevent me pressing the fob buttons through the pouch, but I can be stood right by the door and the keyless entry doesn't know I'm there.

    • @wrathvenge
      @wrathvenge ปีที่แล้ว +1

      Used to use anti static pouches to do similar, but both still make very poor faradays.

    • @theofficialczex1708
      @theofficialczex1708 ปีที่แล้ว +2

      Respect the pouch. Respect it!

  • @tanmaynaphe2748
    @tanmaynaphe2748 ปีที่แล้ว +45

    He's back with a project. 😄

  • @mikefoy3579
    @mikefoy3579 ปีที่แล้ว +252

    So glad to see you posting again. I've dipped my toes back into the hardware hacker space recently and you have been a big inspiration for me for years now. Going to have to run this off for a try as my own 3D printed wallet is starting to wear down now.

    • @ryanlillie8469
      @ryanlillie8469 ปีที่แล้ว +4

      Yeah I always try to find this channel cause it's got some pretty neat and simple yet useful and great ideas. The videos are so satisfying as well. I hope you keep posting node. It's always difficult to find your channel though because the - in the name. When I can't remember it.

  • @bigchurn
    @bigchurn ปีที่แล้ว +26

    Glad your are putting out content again mate.

  • @RustyBrakes
    @RustyBrakes ปีที่แล้ว +84

    The aesthetic of your videos is so enjoyable to watch! And the project ideas are always brilliant

  • @echonuim
    @echonuim ปีที่แล้ว +1

    You, sir, have given me the motivation to set up my 3d printer again.

  • @_IanOfEarth
    @_IanOfEarth ปีที่แล้ว +1

    5 of the coolest minutes of TH-cam I've watched recently.

  • @wickeddubz
    @wickeddubz ปีที่แล้ว +1

    Respect to all dudes like you, I realize how much R&D and fails you need to overcome to succeed.

  • @williamsillustrate
    @williamsillustrate ปีที่แล้ว +1

    Glad to see you back!
    And with a new project I can feel confident attempting!

  • @DriftingMunki
    @DriftingMunki ปีที่แล้ว +45

    USB Hub idea: Use resin, or something similar, to enclose and secure the components. No need to change the design, just add a manufacturing process/step. Great work as always! 🙌✨

    • @PanoptesDreams
      @PanoptesDreams ปีที่แล้ว +3

      Immediately my thought.. Just drown it in Resin!

    • @ericvauwee4923
      @ericvauwee4923 ปีที่แล้ว +2

      or as an alterntive just solder two pcbs on both sides, thinner ones obviously so the LED can shine through. should be easy with castellated holes and it can be accessed if necessary

    • @IbbiAhmed
      @IbbiAhmed ปีที่แล้ว

      same thought. just fill up the empty spaces around components so the entire thing is just one solid piece

  • @blackberrybold9300
    @blackberrybold9300 ปีที่แล้ว +5

    just in time for the holidays. have a good december mr n-o-d-e.

  • @hightech-lowlife
    @hightech-lowlife ปีที่แล้ว +7

    Thank you for your efforts man!

  • @bearnaff9387
    @bearnaff9387 ปีที่แล้ว +10

    Wonderful to see you back, and with such a nice and straightforward project!

  • @mrmysterius
    @mrmysterius ปีที่แล้ว +4

    What a great Wallet. Love your Video/Designing Style

  • @MrManafon
    @MrManafon ปีที่แล้ว +1

    Wauw. This is some DIY stuff reminiscent of 2006 Instructables days. I remember back in the day, a popular DIY movement was starting and I was hoping it would look exactly like what you are doing with the magazine (next issue when pls) and these products. It turned out just to be an excuse to open IT coworking spaces (that were initially named DIY innovation hubs) and sell 3ds max classes and 3D printing services to guys printing anime figurines and VCs printing figurines of themselves, at a scale. It fills my heart with joy whenever you release something new.

  • @jameswoll
    @jameswoll ปีที่แล้ว +1

    lol this is perhaps my favorite of all your projects. isn't it funny how the simplest things can sometimes be the best. well done!

  • @rodrigotellom
    @rodrigotellom ปีที่แล้ว

    You're the best hardware designer hacker in the world my friend.

  • @ahsanmasood1459
    @ahsanmasood1459 ปีที่แล้ว

    I am a simple man, I got a notification of a new video from N-O-D-E. I come, I comment, I like.

  • @jasonnorton9822
    @jasonnorton9822 ปีที่แล้ว +1

    Glad to see that you're still about. Love the idea of the USB hub and whilst it might not be great for long term use, it could definitely get someone out of a tricky spot.

  • @edwardfletcher7790
    @edwardfletcher7790 ปีที่แล้ว

    I love the versatility & amount of thought you put into this 👍

  • @mvaneijgen
    @mvaneijgen ปีที่แล้ว +21

    Cool concept! I would love a more in depth guide on all the different charging port options. Have you made them your self or can they be bought? These seem really interesting!

  • @WhateverTechComestoMind
    @WhateverTechComestoMind ปีที่แล้ว +1

    I just finished sewing it together and it’s awesome! I’m so happy you’re back!

  • @andrewleslie2401
    @andrewleslie2401 ปีที่แล้ว

    One of my favorite channels by far. Glad you started posting again, keep it up!!

  • @kohtalaisenleveahomer
    @kohtalaisenleveahomer ปีที่แล้ว +4

    If the 3D files were converted to a format that could be used for PCB manufacturing, would it be possible to add a copper layer with a solder mask? Then you would have RFID protection and possibly better manufacturing tolerances.

  • @dafoex
    @dafoex ปีที่แล้ว +2

    Probably one of the better minimal wallets I've seen, especially with the multitool. The only thing I don't like about minimal wallets is that there's rarely any space for coins, which I still carry around with me. The best solution I've found are those pound coin organisers, which kind of resemble a fidget spinner and hold five £1 coins (or ten 20p coins if you put two in each slot). Its not perfect as I also want to carry a few other coins (mainly 10p's, but sometimes £2's too) so I should probably see if I can design something that suits my needs.

    • @serineaaskold8428
      @serineaaskold8428 ปีที่แล้ว +1

      You could adjust one of the wallet plates to be a coin holder, so that the elastic strap holds the coins in holes in the wallet side plate against the cards inside

  • @pasemek2501
    @pasemek2501 7 หลายเดือนก่อน

    I love this! Recently been getting my printer up and running again and this seems like a lovely thing to do.
    Had this video saved in a bookmark since the upload and just never got around to it.

  • @razzix2
    @razzix2 ปีที่แล้ว +6

    Man I have been itching for another vid - I was just scrubbing through the old vids to get my fix. This is going right into the print queue to get knocked out - love this setup - its so practical and useful. Also - any useful links for that usb to sd kingston reader? I cannot find them any longer and cannot find anything remotely in that form factor.

  • @petejandrell4512
    @petejandrell4512 ปีที่แล้ว

    Thank you N-O-D-E, what a marvellous and useful little stocking filler. Cheers.

  • @drteletubby
    @drteletubby ปีที่แล้ว

    The public charging / data port blocking adapter is friggin genius. So many people do not understand the risks of plugging into random USB ports.

  • @AlbertPhan
    @AlbertPhan ปีที่แล้ว

    I really like the idea of a small pcb with the components inset in the board. Could make for a cool fun pcb project. Side firing leds could light up the inside of the board.

  • @piotrnod6489
    @piotrnod6489 ปีที่แล้ว

    Yo, you can fill holes with paint, clear lacquer. It will look awesome and you will make them waterproof. Love your style man. Stay safe

  • @beauslim
    @beauslim ปีที่แล้ว +3

    Great stuff. Your USB power-only adapter is interesting. Some 3D printers have a bug where they feed power back over USB, and people have to either open up a cable to cut the 5V conductor or cover the 5V pin with tape. A PCB data-only (2 data pins + ground) plug adapter might be very useful.

    • @jan_harald
      @jan_harald ปีที่แล้ว +1

      bonus is that it's SO simple, you could prolly just buy a thousand of them and give them out for like, free, or almost free (perhaps "first 2 for free, next ones for 10 cents per two")

  • @window.location
    @window.location ปีที่แล้ว +1

    Glad you're back.

  • @alfioemanuelef
    @alfioemanuelef ปีที่แล้ว +4

    Thank you! Could you share some details on the microsd reader you used? I'm assuming you deshrouded it?

    • @lewinfranke5496
      @lewinfranke5496 ปีที่แล้ว

      I would like to see that as well :)

  • @natec1
    @natec1 ปีที่แล้ว +1

    I really like the customization options here. I wonder how well adding the metal into the print could work. Just put down a few layers, add a super flat piece of metal in there with a bit of glue, and then finish the print. I think that could be pretty cool.

  • @tokiomitohsaka7770
    @tokiomitohsaka7770 ปีที่แล้ว +6

    Welcome back! This wallet design is really cool. I still prefer softer fabric over hard(ish) plastic so it won’t scratch anything, but I really like the multi-tool card you came up with. I am probably going to make one with a few tweaks like a built in caliper to measure things accurately (especially if I make the card from steel in a CNC machine).
    By the way, removing the data from USB would certainly remove any kind of support for fast charging, so I wonder if there could be an adapter that will talk to the device and ask which standards it supports, and then talk to the charger and relay that information while keeping any other data from passing; allowing you to protect your device without sacrificing fast charging.

    • @nullvoid3545
      @nullvoid3545 ปีที่แล้ว

      As far as I can tell, A communication protocol like this is built into every usb device as is but, the issue with relying on usb communication protocols is that devices don't usually have USB security in mind. (and usb killers can still get you)
      When you plug something into your system, not only should it prompt you on weather it should make the connection at all, but it should also tell you what the device is announcing itself as. When you plug in A keyboard, it should ask if you just plugged in A keyboard, and if you didn't and it was supposed to be A flash drive, then you know somethings fishy.
      The saddest part of all this is that if you have the will to, you can change these behaviors in almost every OS for both PC's and smartphones, but the people that need A protective measure the most get it disabled by default.

    •  ปีที่แล้ว

      I always have a power bank with me, and that basically does this, if you plug that in the wall, and your phone into it. It's going to provide the fast charging it is capable of. But then you probably don't need the wall :D (and it's overkill)

  • @toddsheppard3387
    @toddsheppard3387 ปีที่แล้ว

    This is awesome! I really love the multi tool!

  • @TrekIsrael
    @TrekIsrael ปีที่แล้ว +1

    Welcome back Mr.Node

  • @swellbee
    @swellbee ปีที่แล้ว

    your editing skillis are too good like tooooo good, most underrated chanel
    love your content

  • @JohnWeland
    @JohnWeland ปีที่แล้ว

    We've missed ya dude! Welcome back and awsome work as always!

  • @maddads6492
    @maddads6492 ปีที่แล้ว

    Great to have you back.

  • @mohsenalbo5533
    @mohsenalbo5533 ปีที่แล้ว +2

    Bro you should try recording a podcast, the cyber dump series were amazing

  • @mrbeanington8806
    @mrbeanington8806 ปีที่แล้ว

    What's up! Glad to see you're still creating amazing projects!

  • @DawsonFord
    @DawsonFord ปีที่แล้ว

    One of the best channels

  • @corvusaflame713
    @corvusaflame713 ปีที่แล้ว

    One of my favorite TH-camr. 😎

  • @640kareenough6
    @640kareenough6 ปีที่แล้ว

    That usb hub is really neat! I would probably just fill the holes with epoxy resin so all the parts are held in place

  • @krisjanisvanags6864
    @krisjanisvanags6864 ปีที่แล้ว +1

    This is super cool, like the idea of the super small USB hub and would love to see how you improve it!

  • @Ashkimbo
    @Ashkimbo ปีที่แล้ว +6

    Hey Node, do you, or does anyone, have a source for the Kingston MicroSD card readers show in this video? I've been trying to track them down since one I got from your store years back is becoming worn out and the metal exterior slides off!

    • @Turntekuu
      @Turntekuu 6 หลายเดือนก่อน

      Model name is FCR-MRG2, seems to be available in bulk, may have to roll the dice with a sketchy parts distro 😢

    • @Ashkimbo
      @Ashkimbo 6 หลายเดือนก่อน

      @@Turntekuu yeah I had managed to track them down once but could never find any in-stock. Where did you see them?

  • @TheAkashicTraveller
    @TheAkashicTraveller ปีที่แล้ว

    I use those active RFID blocking cards instead of a super thin peice of metal. An RFID skimmer uses a much more powerful transmitter than a usual reader so you can't realy be sure that passive blocking will actually work unless you have one. The active cards on the other hand work like a normal RFID card where they're powered by the reader or skimmer but instead of exchanging data they transmit interference making reading a card impossible also a stronger transmitter just results in stronger interference.

  • @ADiConsultores
    @ADiConsultores 7 หลายเดือนก่อน

    Great contribution to the Make community!

  • @chrissre7935
    @chrissre7935 ปีที่แล้ว

    Looks great. Nice ergonomic use of space.

  • @poulpymlgmlg3659
    @poulpymlgmlg3659 ปีที่แล้ว +1

    this project is really insane i love it ! glad you are still posting , i'm going to make the same thing when i find time thanks a lot for the idea !!!

  • @sourvenom359
    @sourvenom359 ปีที่แล้ว

    The man himself is back! Great to see your new content, keep up the good work

  • @qwerty123443wifi
    @qwerty123443wifi ปีที่แล้ว

    You could pot the exposed chips and coat the other side lightly in epoxy too, that should greatly improve reliability (something like hot glue or cyanoacrylate might work too)

  • @eccodreams
    @eccodreams ปีที่แล้ว

    the return of the king

  • @surrealdynamics4077
    @surrealdynamics4077 ปีที่แล้ว

    I really like these kind of sandwich wallets. The idea of making a compact version of the classic wallet seems simple, but there are so many alternatives. And this one I really really like.
    I've been meaning to make it since I saw a very similar one some years ago in the "one minute workbench" channel, it was named wooden wallet diy or something similar, in case anyone wanted to check it out too

  • @nicholasemig6502
    @nicholasemig6502 ปีที่แล้ว +1

    Where do you get usb adapters that small! Love the idea I've been trying to find something like this but everything I can find is too bulky

  • @hahalolha
    @hahalolha ปีที่แล้ว +1

    Wow, Excellent project (or projects I should say). I'll definitely be making a few for myself and for others I know. That USB Hub design especially looks spectacular, I could definitely use it quite regularly 😀

  • @Scrogan
    @Scrogan ปีที่แล้ว +23

    Neat, really like the idea of embedding electronics in a PCB to make a low-profile project like that. I’ve been thinking it must be possible to get a 3.5mm headphone socket made of castellated vias in a similar way. Be it for audio, or for serial data like on the Pinephone.

    • @rya3190
      @rya3190 ปีที่แล้ว +2

      Would that serial data be used like the old cassette tape setups for early PCs? If so, that would be a very compact and "universal" system.

    • @Scrogan
      @Scrogan ปีที่แล้ว +1

      @@rya3190 well it would be RS232 but at TTL logic levels, also known generically as “UART”. Lots of microcontrollers have dedicated hardware for it, you just need a MAX232 or equivalent IC to change it to RS232 logic levels.

    • @rya3190
      @rya3190 ปีที่แล้ว

      @@Scrogan Yeah, I just picked up one of those MAX232 boards (it's already installed with pins, resisters, and the port), so I'll get to mess with those ports. I suppose the two data lines could run across 3.5mm mic/stereo lines and power can be received from somewhere else.

    • @Scrogan
      @Scrogan ปีที่แล้ว

      @@rya3190 generally RS232 doesn’t carry power to peripherals anyway, as unfortunate as that may be. I was definitely disappointed when I found that the Pinephone didn’t use a TRRS jack for a power rails also.

  • @supersmasher1495
    @supersmasher1495 ปีที่แล้ว

    He’s really back this is amazing 😆

  • @DrMoofK
    @DrMoofK ปีที่แล้ว

    welcome back again! always looking out for your vids.

  • @Kyle-wb7wx
    @Kyle-wb7wx ปีที่แล้ว

    I always enjoy your content! Thanks again!

  • @ErtugrulOzdemir-mf1gl
    @ErtugrulOzdemir-mf1gl ปีที่แล้ว

    Fantastic video and design as always

  • @yuGtahT
    @yuGtahT ปีที่แล้ว +5

    Very cool!

  • @welshdave5263
    @welshdave5263 ปีที่แล้ว +4

    Cool, I've been tempted to do something like this, thanks for the inspiration.
    One material you didn't mention, PCB itself, like the USB hub could be integrated into one of the covers.
    Send off the file, open a box :-D

  • @BigBananaBread
    @BigBananaBread ปีที่แล้ว +1

    welcome back!
    have you considered for something like this selling them on etsy? either as individual bits or as a pack?

  • @xEqualsRandom
    @xEqualsRandom ปีที่แล้ว +1

    Would it be possible to make a USB C cable that's a card sized PCB, similar to the USB hub you showed?

  • @SubwayToSally90
    @SubwayToSally90 ปีที่แล้ว +2

    Looks neet! Any idea if you are going to sell it and what the price tag could/will be? I sadly lack the time and utilities to make one myself.

  • @noisytim
    @noisytim ปีที่แล้ว

    That is mighty nifty! Great work :)

  • @casey5618
    @casey5618 ปีที่แล้ว

    Missed seeing you upload your videos are always really enjoyable

  • @ghostify6502
    @ghostify6502 ปีที่แล้ว

    The Gerber Barbill wallet is my ideal minimal wallet. Might care to give it a look for inspiration

  • @-indeed8285
    @-indeed8285 ปีที่แล้ว

    Happy to know you are back, take love dear.

  • @usbgamers123
    @usbgamers123 ปีที่แล้ว

    Nice to see you back!

  • @nick-firstest
    @nick-firstest ปีที่แล้ว

    Your stile of design is beautiful

  • @goodboiadvsp3297
    @goodboiadvsp3297 ปีที่แล้ว

    So glad you are back to making videos Cant wait to see what more fantastic open source tools the hive mind thinks up.

  • @SkullTraill
    @SkullTraill ปีที่แล้ว

    Yooo, so hyped to see you back! Hope you are doing well, also, happy holidays!

  • @BaldyTron
    @BaldyTron ปีที่แล้ว

    You could add a torch/laser pointer to the shell or other micro tools

  • @jameswoll
    @jameswoll ปีที่แล้ว

    Nailed it! EDC peeps eat your heart out.

  • @DIYTinkerer
    @DIYTinkerer ปีที่แล้ว +3

    Hi N-O-D-E,
    Thanks for all the videos, I've been a subscriber for a few years now and love the style.
    I recently made a version of your slim wallet in hardwood veneers on my channel - I won't put the link in here as I don't want to offend you with my poor editing and filming skills! Thanks for the idea.😀

  • @AcidiFy574
    @AcidiFy574 ปีที่แล้ว

    Good to see you whenever you upload

  • @PAPERSCHOOL
    @PAPERSCHOOL ปีที่แล้ว

    Could you embed the rfid sheeting in the plastic body, by pausing the print and layering it inside? I think if you are strategic about the holes cut out of rfid sheeting and where the recievers usually live in the cards you should still preserve much of the bond surface between print layers. Might be worth a go!

  • @notpidogs
    @notpidogs ปีที่แล้ว

    I've been looking for a slim wallet I can print. Thanks for the great timeing!

  • @opus1520
    @opus1520 ปีที่แล้ว

    glad to see youre back

  • @dylancarson4538
    @dylancarson4538 ปีที่แล้ว +1

    as some one who just lost there wallet this is the perfect way to find out your back

  • @wesleysantana2238
    @wesleysantana2238 ปีที่แล้ว

    I love your videos.

  • @RacoonMedia
    @RacoonMedia ปีที่แล้ว

    Glad to you you posting again. I'missed the content. This is a very good one. Really love your style.
    Any chances on newer cyber Dumps?

  • @goofydavid100
    @goofydavid100 ปีที่แล้ว

    The Goat is back

  • @estebanod
    @estebanod ปีที่แล้ว +1

    Where can I buy the black minimalist pcb adapters ??

  • @Rok_Satanas
    @Rok_Satanas ปีที่แล้ว

    This, but made with pcb and ordered would be pretty cool. Guess i have a weekend project.

  • @spamfilter2966
    @spamfilter2966 ปีที่แล้ว +1

    Hello,
    Over here in Europe we still use coins on a regular basis. Is there any variations you have made that helps carry them? If not I recommend taking inspirations from the aviator wallet, which has the same concept. Lastly, I was wondering whether I can transform this wallet into a tungsten one, the price however is quite expensive for that, and I recommend aluminium, as it is farm cheaper and most aluminium stores can make them.
    Thanks for your time.

  • @toastielad4760
    @toastielad4760 ปีที่แล้ว

    Right as I was thinking of making a wallet! This looks like it works great for what I had in mind, though I’ll see what mods I can add.

  • @dan_rad
    @dan_rad ปีที่แล้ว

    Would be good to see this with a channel cut for a small USB cable built in.

  • @ShadowFandub
    @ShadowFandub ปีที่แล้ว

    its so great job node as usual

  • @dinoDonga
    @dinoDonga ปีที่แล้ว

    Loving it. I am not versed in pcb design but would it be possible to cover the components with clear epoxy or would that pose a heat dissipation issue. maintaining the aesthetics would be definitely a plus

  • @SilverSmrfr
    @SilverSmrfr ปีที่แล้ว

    Wow a new video. Thank you so much.

  • @peterferencz
    @peterferencz ปีที่แล้ว

    Really cool idea, it's nice to see you making something useful and sharing it with others.
    A constructive comment: could you try making the video dark-themed all the way? Other than that your video is brilliant as always.

  • @SergioGugliandolo
    @SergioGugliandolo ปีที่แล้ว

    Woooooow, people think I'm crazy when I let them see my wallet, It's similar to your design and I loooooove it(i'm shurelly using the idea of adding lines on the side to make it similar to cards xD)! I really like the idea of the "security" cable that connect just power, do you think It might be a good idea to make a whole card that split (only power) from a female type-C to many female type-A ports all around (as always as flat as possible)? I like this idea because I might keep just one charger on the go but still have a splitter for many devices that I need to charge.

  • @derekslifer7774
    @derekslifer7774 3 หลายเดือนก่อน

    Absolute genius!!

  • @pasikavecpruhovany7777
    @pasikavecpruhovany7777 ปีที่แล้ว +1

    I'd love to see a low profile wallet that can safely carry microsd's and usb goodies but also hold cash and coins

  • @evilfluff6634
    @evilfluff6634 ปีที่แล้ว

    The hub you can use a epoxy to protect the chips and small parts