Thanks. I currently have Smoke Saber and Smoke Centurion and I alternate between them from test to test. Also I ended up blowing out the detector with canned air but it wasn’t shown in the video for time reasons.
The system in my area that is common (other than firelite/notifier and system sensor) is a firelite addressable system with wheelock notification appliances
My setup is set up though when there's no power. This my box actually it's the lights and brings a bell my room to tell me there's no power. It sort of works or doesn't work but it worked great the last time I used it. May 2021 because there was a tornado warning issued. I'm a heavy sleeper that Bell is only going to wake me up. And the weather where you go off crazy it's a good thing to have.
That video was taking on my birthday! By the way, your MTL is 110CD? What's the model No. for the 110CD models? I've never seen any other youtuber with an 110CD Cerberus Pyrotronics MTL.
Cool video man! Do you have the LED on your 2098-9806 key switch directly wired to a NAC on your ms5ud? Have you had it wired like that for a while on your old house system test series? Thank you for your help!
Surprised the alarms didn't freak out after the power outage... I did a whoopsie when I was doing work on a locker box and pulled the power cord for a power cycle... Didn't realize it was also powering the firelite system. First thing I notice is beeping which I thought was weird for the locker and the alarms go off. Plugged it back in but no one said anything... I'm guessing I'm not the first person to fuck that up.
Most of the time the only thing that will happen is the control panel will beep in trouble indicating an AC fault. Older systems can have issues where the alarms will sound in a power failure which isn’t by design.
At my grandparents house 🏠.The exit sign was on.not the emergency lights. The power lines got strucked by lightning ⚡ and the exit sign combo stays on when the power goes out
In North America most smoke detectors on fire alarm systems do not have any built in sounders. However you can get some with a sounder base or internal sounder. These are mostly common in hotel, dorm, or other sleeping rooms.
@@ExitSign250 ok mate, we get sounders in ours quite a lot (Apollo, Gent, Roshni to name a few, (fire alarm brands we have in the UK) Pull stations (aka call points) (idk the actual names) KAC Call Point, Apollo XP95 Call Point, and this one old one I forgot the name of, it’s the old push to break glass one, while the first two are push to activate but u can reset them
How much current does the system draw when it’s in alarm? I imagine the batteries would drain quite a bit while the fire alarms are going off compared to a normal state.
Good question. I’m not sure of that information on the top of my head, and it varies depending on what devices are installed. Fire alarm code requires alarms to sound and flash for a minimum of 15 minutes if the system is operating on the backup batteries. So in theory it should at least last around that time.
Fire alarm can still go off because when I was at school the power went out then a few mins later the fire alarm go off then they say disregard the fire alarm and every since the power when out the fire alarm kept turn on and they have to keep say disregard the fire alarm and it only happened in the morning when we are waiting outside
i have a house and i want to install a fire alarm system but im not a profesional and i dont know what things i need so its not gonna be easy to install
Both the AS and NS are two wire alarms. They are able to be audibly silenced with Wheelock’s sync protocol; which the Fire-Lite MS-9200UDLS is capable of and was set to in this video.
@@ExitSign250 Very cool! Thanks for the quick response :) ! I'll look into how this works, I think it's pretty interesting! I think your videos are great, keep up the good work!
@@ExitSign250 Sorry for bothering you, but I have one more question. I recently purchased a Wheelock 31T, which, if I recall correctly, is an AC horn. I have a DC panel, so I'm not exactly sure how I would make that work with my DC panel. Do you have any idea on how I could do that?
@CrappyPastry99 Hey again! No worries, you aren’t bothering me at all. Unfortunately with an AC horn it cannot be used with panels with DC outputs. However, if your panel has an alarm relay, you can connect your horn to it with an AC power supply if the relay is rated for it. While this method will allow the horn to sound when the panel is in alarm, you cannot silence or change the coding as the alarm relay is triggered when the panel is in alarm and resets when the panel resets. I hope this makes a bit of sense and feel free to ask anymore questions!
I've always wondered how fire alarm systems would operate during a power outage. Got this idea when one of my schools lost power
Yep. Fire alarm systems are required to remain functional in a power outage for a minimum of 24 hours. (At least in the US)
Looks like so many people are doing tests with Wheelock Ns’s this weekend. Nice video!
Thanks! Haha yeah that’s just a funny coincidence. I’ve had the devices planned for this system test for a few weeks now.
We had a bad storm to
2:07
“It’s currently installed in the pull station.... location on my demo system”
Idk why but I thought this was hilarious
Great no power test. I have different kinds of smoke detector testers including smoke sabre. I also use compressed gas duster to blow the smoke out
Thanks. I currently have Smoke Saber and Smoke Centurion and I alternate between them from test to test. Also I ended up blowing out the detector with canned air but it wasn’t shown in the video for time reasons.
Very nice! I loved the small clips in the beginning and end.
Thanks! Yeah I wanted to try out something new. Thanks for the feedback!
Great video as always that intro was really cool 👍
Thank you! I appreciate it!
Lovely to me
Wait, I’m subscribe to him that one. TH-camr you have all the fire alarms and security systems ¿right?
Do your neighbors get mad!?
Haha, usually they don’t!
Great us system!! The netherlands.
@@ExitSign250 hi
Cool. It’s neat to see a system function with no power and no way to restore power. Great video! The intro and ending was cool! :)
Thank you so much! I’m glad you enjoyed it.
Batteries are chad
You’re awesome at fire alarm videos!
Probably one of the coolest tests I’ve seen
I think the AS and the NS sound amazing together.
We had a tornado warning 4 days ago while I was in a different house for the weekend. The Power didn’t cut though but it did start flickering
I'm impressed you're able to operate a fire alarm system in no power!
That cerberus pyrotronics sounds like a siemens UMMT! Interesting
That's my favorite alarm!
That’s some quality stock footage there in the beginning.
Great test! Love the neat editing!
Thank you! I wanted to experiment and try something different.
Very nice. I think this is one of the best tests you’ve made, well done.
Awesome system test! I enjoyed this one!
Thank you very much! I’m glad you liked it!
The system in my area that is common (other than firelite/notifier and system sensor) is a firelite addressable system with wheelock notification appliances
My setup is set up though when there's no power. This my box actually it's the lights and brings a bell my room to tell me there's no power. It sort of works or doesn't work but it worked great the last time I used it. May 2021 because there was a tornado warning issued. I'm a heavy sleeper that Bell is only going to wake me up. And the weather where you go off crazy it's a good thing to have.
THAT INTRO WAS SO SICK
I hear the AS more than the NS. I wish they were seperated. then you could hear it better.
Great test! I did really like the intro!
That was one hell of a sweet intro
great editing on the power Failure scene, Really grabs attention
Thank you!
nice bro. I really liked this one
lol this vid was taken on my 20th bday! Great video!
That video was taking on my birthday! By the way, your MTL is 110CD? What's the model No. for the 110CD models? I've never seen any other youtuber with an 110CD Cerberus Pyrotronics MTL.
Hey exitsing250 you are the friend of ser safety.
0:14
Omg when the power went out, it scared me🤯
Scary lightning 🌩
Cool video man! Do you have the LED on your 2098-9806 key switch directly wired to a NAC on your ms5ud? Have you had it wired like that for a while on your old house system test series? Thank you for your help!
Surprised the alarms didn't freak out after the power outage... I did a whoopsie when I was doing work on a locker box and pulled the power cord for a power cycle... Didn't realize it was also powering the firelite system. First thing I notice is beeping which I thought was weird for the locker and the alarms go off. Plugged it back in but no one said anything... I'm guessing I'm not the first person to fuck that up.
Most of the time the only thing that will happen is the control panel will beep in trouble indicating an AC fault. Older systems can have issues where the alarms will sound in a power failure which isn’t by design.
Ohh really cool video!! I enjoy your videos!! Stay safe and have fun!! ...
2nd system made me think: vibein during the fire alarm
Love Code 3 alarm sound
0:15 power went out because it’s thunderstorm
No shit Sherlock
4:45 the trouble light with the lights off looks scary
That one alarm on the far side sounds like a UMMT horn strobe
The beeping makes me think about that weird beeping at the McDonald's kitchen
That's actually true, and that's facts.
And I really like how those panels connected
I had a power outage while I was watching this.
They sound pretty cool like the ones at my elementary school I believe
And 7:35 sounds like the ones at the mall I go to (the white one does)
I wish I could do all this stuff
Isn’t this your second power outage test with the ms 5ud
Not sure. I don’t remember making one before, but I might’ve.
@@ExitSign250 link to power outage video you made:th-cam.com/video/J_jp4eHLbG4/w-d-xo.html
At my grandparents house 🏠.The exit sign was on.not the emergency lights.
The power lines got strucked by lightning ⚡ and the exit sign combo stays on when the power goes out
Hey. What happened to your old power outage videos?
Stay safe out there my friend!
I like how it sounds like a Siemens ummt
What if you tried to make almost every spot a strobe and had none of them synchronized so when the system goes off it’s just flashing lights galore
The power went cutoff and my exit sign/emergency light combo turned on and the exit sign stayed on
Do a new series called: board 3
Where you use both boards
What would you do if you had a air raid siren
Do the smoke detectors actually make sound?
In North America most smoke detectors on fire alarm systems do not have any built in sounders. However you can get some with a sounder base or internal sounder. These are mostly common in hotel, dorm, or other sleeping rooms.
@@ExitSign250 cheers mate
@@ExitSign250 ok mate, we get sounders in ours quite a lot (Apollo, Gent, Roshni to name a few, (fire alarm brands we have in the UK)
Pull stations (aka call points) (idk the actual names) KAC Call Point, Apollo XP95 Call Point, and this one old one I forgot the name of, it’s the old push to break glass one, while the first two are push to activate but u can reset them
I got a bg12 lx addressable pull station for my birthday
My area had two thunderstorms nothing new just normal, feel really bad towards the west coast where summers get hot and people don't save their power
Nice Video
How much current does the system draw when it’s in alarm? I imagine the batteries would drain quite a bit while the fire alarms are going off compared to a normal state.
Good question. I’m not sure of that information on the top of my head, and it varies depending on what devices are installed. Fire alarm code requires alarms to sound and flash for a minimum of 15 minutes if the system is operating on the backup batteries. So in theory it should at least last around that time.
0:16 fire alarms: why is the power out?
I know all about fire alarms that I made want myself by hand
Fire alarm can still go off because when I was at school the power went out then a few mins later the fire alarm go off then they say disregard the fire alarm and every since the power when out the fire alarm kept turn on and they have to keep say disregard the fire alarm and it only happened in the morning when we are waiting outside
How does it work at No power?! I throughly the fire alarm panel was working
cool test
Noticed How The LED (or LCD) On The Panel Turned On In Fire Alarm Mode?
i have a house and i want to install a fire alarm system but im not a profesional and i dont know what things i need
so its not gonna be easy to install
Well that's cool!
How to light ur room in a power outage: get bigger building fire alarm and pull it
Cool I’ve had bad storms before and lost power
Quick question: are the AS and NS alarms the 4 wire variants? If not, how are the strobes still flashing if the alarm is silenced?
Both the AS and NS are two wire alarms. They are able to be audibly silenced with Wheelock’s sync protocol; which the Fire-Lite MS-9200UDLS is capable of and was set to in this video.
@@ExitSign250 Very cool! Thanks for the quick response :) ! I'll look into how this works, I think it's pretty interesting! I think your videos are great, keep up the good work!
Thank you very much! I’m always happy to answer any questions!
@@ExitSign250 Sorry for bothering you, but I have one more question. I recently purchased a Wheelock 31T, which, if I recall correctly, is an AC horn. I have a DC panel, so I'm not exactly sure how I would make that work with my DC panel. Do you have any idea on how I could do that?
@CrappyPastry99 Hey again! No worries, you aren’t bothering me at all. Unfortunately with an AC horn it cannot be used with panels with DC outputs. However, if your panel has an alarm relay, you can connect your horn to it with an AC power supply if the relay is rated for it. While this method will allow the horn to sound when the panel is in alarm, you cannot silence or change the coding as the alarm relay is triggered when the panel is in alarm and resets when the panel resets. I hope this makes a bit of sense and feel free to ask anymore questions!
I’m impressed how much money he gets he literally has 3 panels and an anuncinater that’s like $4,000 like oml
love it
I am adding a new system to my office. What fire devices do you recommend?
I live in Colorado, USA. Fire central
was the whole system including the fire alarms running off of the battery?
Yep! Those batteries power the entirety of the system.
@@ExitSign250 Cool! Nice video by the way
How do they still work if there’s no power in just wondering
Last Thursday my power went out because of so many people using the air conditioning
Im traumatized by the genesis
The volume of this video was very low. Hard to hear your.
My audio levels are fine. The issue must be on your end.
How did the power go off?
Fire alarm pulled at tornado warning
Yeah, I say so has no Wi-Fi single I know you’re neighbors probably got mad because yeah and pretty much It was calling the cop sometimes I think
10:19 would this scare u?
No power
The power went out in my grandparents house
A powder outage happened like that
Wait is this the new vidoe
I have one of the wheelocks but one of them is old
Good morning to all
Panels: what the heck is happen ing?!?!?
pull station- location lmao
Ser safety from where did you get that lighter i want one
its exitsign250 not s.e.r safety..
The exit sign one on
was this a stage power outage?
Damn p yo exercise 250 can you send me do you have a bb8 with the key and the Chipmunks 499 no singplex 499-499l
How dose it work when there's no power
External power box battery
you are so funny lol
should I make a Instant gram account
No Power = No lights
Can i look system test 11
W
E
L
L
At 7:29 the 2nd is in White and red
10:07 that is pretty ironic