ESP32 Home Automation Using Blynk 2.0 With Online Simulator ||Wokwi
ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2024
- Welcome to our TH-cam video on Home Automation using the ESP32 microcontroller and the Wokwi online simulator!
In this video, we will be demonstrating how to use the ESP32 and the Wokwi simulator to create a simple home automation system. The Wokwi simulator is a free online tool that allows you to program and simulate the behavior of electronic circuits and devices, including the ESP32.
We will start by introducing the ESP32 and the Wokwi simulator, and then walk you through the process of setting up a home automation system using the ESP32 and the Wokwi simulator. We will show you how to connect and control various devices, such as lights and appliances, using the ESP32 and the Wokwi simulator.
By the end of this video, you will have a solid understanding of how to use the ESP32 and the Wokwi simulator to create a home automation system, and you will have the skills and knowledge to build your own home automation projects using these tools. So, if you are interested in home automation or want to learn more about the ESP32 and the Wokwi simulator, be sure to watch our video!
Code drive.google.com/drive/folder...
#openai, #wokwi, #esp32project #chatgpt - วิทยาศาสตร์และเทคโนโลยี
Basically I'm from doctorate background but only bcoz ur channel Ani ur guidence now I'm became a electrical engineering....thankk u sirrrrrrrrrrr.......
Thank you for your step-by-step instructions. It worked for me, it just didn't seem to be connected the first time I ran the simulation, but it worked on the second run.
One problem in the code:
On the line
//During Starting all Relays should TURN OFF
digitalWrite(relay1_pin, HIGH);
it should say
digitalWrite(relay1_pin, LOW);
The same goes for the other 3 relays.
I looked at this part of the code when I noticed all relays being ON from the start.
thank you for this information i actually run to the same problem , and followed the instructions and it actually worked
Hope this is helpful for you..
Thank you so much it helped a lot and implemented this project for my academics
I'm glad to hear that my response was helpful in your academic project. It's always rewarding to know that the knowledge I provide can be put to good use. Keep up the good work and don't hesitate to reach out if you have any further questions or need additional assistance. Good luck with your project! :)
@@technicalshubham789 bro code link plz
Amazing. Thanks for share your project.
I appreciate your support! Thank you for taking the time to watch and comment. 💫
Thank you so much sir 🔥
Thanks Bro..
Its Working...
Very good Shubham.... Keep it up
Thank You Sir 💫
Gurujii aap kaha the etne din....
Meri sansse atk rhi thii...apka video nhi dekha too..gurujii aap update rahiye....
Good job bro,
but can you please tell me where you find your sounds ?
Sir, will this show how much electricity has been passed or monitor the electricity?
Nice video bro❤ .
Bro I need simulation video for under this topic
Topic name :Automated controller of street light
management systems
Topic Description:Develop an automated system for real-time street
light fault detection, precise location tracking, and
efficient maintenance in cities.
It's looking cool .....I will try
Sure 😊
Thanks
thank you so much
Rather than adding bgm,if you explain things .it would look even more appealing ,thanks ;)
I'll do that thanks for suggestions..
Hi sir may i ask where is the code that you said in the discription below?
Check again
hello brother.. if i want to add ultransonic sensor ?? how the code will be? can you do?
Do u still want the code?
hello, there is a way to start the simulation from the moile app??
I think its works on desktop mode. Please try on that and if possible use the PC for simulation.. Thank You
Can someone explain about this
sir 6 input 6 output ground dene par led blink kare ek video banaye please next video wait for me.
I'll make circuit for you : )
WHAT CODE?
Please to clarify
Bro how ur are rotating components
Preee R for rotation of components
@@technicalshubham789 haa yesterday got it bro.. Tqq for code. It's really helpful
i m making this on hardware but i m a little confused about wiring....can u please help?
Yeah Where you stucked ..?
connecting push buttons
see i am asking that should i connect esp32 on the breadboard
because i m using the same code so i need to make sure that connection is also the same
The connection is same for the code
by which name can i get this relay at shop?
It's 5v,3A DC relay module.
@@technicalshubham789 thankyou
Sir u have simulator video of nodemcu
In this Simulation platform, There is no any ESP8266 board soo , I didn't having simulation for NodeMCU ..
How can I turn this into voice controlled home automation
You can use VC-02 module to control home appliances with voice control
What are the home automation technology except this and how to design in wokwi with coding
Pls reply bro
You can add multiple sensors like smoke detectors, Soil moisture detectors, Temp sensors For Fan speed regulation, Also you can make automatic door opening system using ultrasonic and PIR sensor the possibility is endless you can make anything. Here in Wokwi there is limitation of sensor but you can Also try TinkerCAD where you can find multiple sensors but there you cannot use IOT device board like ESP or Raspberry Pico . You can try both TinkerCAD and Wokwi. Also to build the circuit you can try Circuto.io site
@@technicalshubham789 thankyou bro
Home automation means connect only blynk2.0? but( think speak)
Pls reply bro
can I use this on arduino ide? how?
You can copy the code from simulation OR You can download the zip file from share option, where you get Circuit diagram and code which you can import in Arduino IDE
can you provide me with the code
Bro it will not work in new version
It works..
How to rotate circuit bro pls answer
By pressing R on Keyboard
Tq bro
shubham?? Can you reply pls, before 30 June, 2023
Which type of explanation do you want is it working or Circuitry?
.Hi Sir coding file does not open
Please response
The link is working proparly in that you will find a zip file loaded with all necessary data for project..
The code is page is not opening
I apologize for the inconvenience. To resolve the issue, try clearing your browser's cache or using an alternative browser. These steps can help refresh the page and improve its accessibility. the code link is working properly.
🙂
Bro link code not in description
wokwi.com/projects/351989123979936341 All the Best 🙌
It's done
On my college project bro
Thank you so much
Your video useful for me
Keep rocking
Thank you so much for letting me know that my video was useful for your college project! I'm glad I could help. Keep up the good work on your project!
Sir how to edit code?
You can either edit the code in simulator or you can download the code file n edit offline..
@@technicalshubham789 Thank yu 🙌
Can i get source code
"Sorry for forgetting to include the code link in the video description. It's available now. Please use it to follow the tutorial and customize the code. Thanks for your support!"
not a coding in the discribsion
Yes
I just wanted to quickly address a mistake I made in the video description. I realized that I forgot to include the link to the code used in the tutorial. I apologize for any inconvenience or confusion this may have caused.
But the good news is, I have now updated the description with the correct link to the code. So if you were having trouble following along or getting the code to work, please check the description again and you should be all set!
Thank you for your understanding, and as always, if you have any questions or feedback, please don't hesitate to let me know in the comments.
Bro code link plzz
wokwi.com/projects/351989123979936341 ........ Please Check ✌
could do without the annoying music
Provide code plz
drive.google.com/drive/folders/1c8MUOoeQwTnGt8PyfQYZYzQhtFuaPPtn?usp=sharing
@@technicalshubham789 dude this link is not working
bro please provide code
drive.google.com/drive/folders/1c8MUOoeQwTnGt8PyfQYZYzQhtFuaPPtn?usp=sharing
I can't extract the code , please can you send my email id
Drop your mail I'll share