Thank you so much po for this tuitorial. Balak ko na sanang idispose yung speaker ko na to at bumili nang bago, buti na lang nakita ko video mo at bumalik sa dating tunog yung JBL 2 Go ko. Life saver ka po. Maraming salamat!
mas madali po tanggalin yung takip kung may heatgun kayo. Wag niyo masyado painitan dapat sakto lang para lumambot yung adhesives, besides napakalaki ng tulong mo bro nabuhay ko ulit yung 4 yrs ko nang JBL kala ko talaga sira na to ahahaha
Finally nabulas kona halos 2 hours ko atang inoopen ang hirap sumakit na kamay ko then pagka open nya may sira nga.....Thankyou so much po dito sa viddd🫶🏻🤍 Kala ko diko na magagawa😭
Napakalaking tulong po.. mejo nasira nalang yung katawan nia pagbubukas kasi lumutong na yung rubber. Pero sulit parin itong go2 ko kasi ilang taon na sia.. nilagyan ko nalang silicon protector. Thanks boss
I would not recommend this hack, especially if the torned part is big. At this problem, I would recommend you to replace the whole speaker driver, the size for the speaker driver for JBL Go 2 is 40mm 3.1 watts, you can also put a 5 watts 40mm speaker driver.
You used the so-called “low frequency mode.” There’s no such thing as low frequency mode. It’s just a debug mode that turns off digital signal processing and limiters.
Thank you so much po for this tuitorial. Balak ko na sanang idispose yung speaker ko na to at bumili nang bago, buti na lang nakita ko video mo at bumalik sa dating tunog yung JBL 2 Go ko. Life saver ka po. Maraming salamat!
Buti na lang nakita ko to. Tinry namin sa JBL Clip 2, EFFECTIVE!! Scotch tape supremacy hahaha. THANK YOOOUU!! 🔊 🔊
I used rugby to cover the cracked part, let dry for 24 hours or more and everything back to normal. 100% working and easy to repair.
You are a life saver kuya. Totoo nga pag bukas ko may punit nga siya. So sinundan ko lang ang ginawa mo and it works. Super thank you😊😊.
Wow! Nice repair tutorial. Very simple and effective
Kagagawa ko lang nito. SUPER EFFECTIVE. Thank you
Enjoy.
YEY! IT Worked po! THANK YOU VERY MUCH! tapos yung sa gilid lang pala tlga madali buksan yung takip. salamat! salamat!
Thank you so much!!!! Super helpful po 🥰🥰🥰
Hjlk
Thank you so much! What a life saver man
Thanx bro I fix my problem through ur fixing tutorial video ❤
Welcome 👍
Thanks youuuu.....mantap jiwa mempesona👍👍👍👍👍👍👍
Very Helpful, Thank You Very Much! ❤️
Thanks! Sobrang nakatulog
mas madali po tanggalin yung takip kung may heatgun kayo. Wag niyo masyado painitan dapat sakto lang para lumambot yung adhesives, besides napakalaki ng tulong mo bro nabuhay ko ulit yung 4 yrs ko nang JBL kala ko talaga sira na to ahahaha
Finally nabulas kona halos 2 hours ko atang inoopen ang hirap sumakit na kamay ko then pagka open nya may sira nga.....Thankyou so much po dito sa viddd🫶🏻🤍
Kala ko diko na magagawa😭
Salamat bro, nakatulong sya sa jbl ko 😭😭 tatapon ko na sana eh
solid to muntik ko na matapon jbl ko salamat ditoooo approve
thanks man. I see the cracks after opening it.
Tnx nagawa ko ung skin hehe buti nlang nakita ko ito balak ko sana na itapon 😅
Napakalaking tulong po.. mejo nasira nalang yung katawan nia pagbubukas kasi lumutong na yung rubber. Pero sulit parin itong go2 ko kasi ilang taon na sia.. nilagyan ko nalang silicon protector. Thanks boss
Thank you for this tutorial. Pwede kaya mapalitan nalang instead itape?
Thank you! ❤
Maraming salamat po :)
That just a temporary solution. It won't last
Yung marshall emberton ko parang wala namang butas akong napansin pero ganyan din ang tunog. Haha kainis. Sayang pera ko don
thankyou 💯
The top cover is not coming out.. how come it was so easy for you? Did you use heat gun or something before?
Thank you so much
Rubber adhesive T7000 paps,👍
Thanks!
mas magandang gamitin na tape ung gamit sa gasa ung pang medical ung fiber... pang matagalan un tas papatakan mo ng super glue
I would not recommend this hack, especially if the torned part is big.
At this problem, I would recommend you to replace the whole speaker driver, the size for the speaker driver for JBL Go 2 is 40mm 3.1 watts, you can also put a 5 watts 40mm speaker driver.
Yung gilid nasira ko na lang. Masyadong madikit diko matanggal yung cover ng speaker
Try nyo po cutics mas matibay .
You used the so-called “low frequency mode.” There’s no such thing as low frequency mode. It’s just a debug mode that turns off digital signal processing and limiters.
Silicone the best🎉
Ayaw mabuksan ung cover po ng akin😭
Na damage na ung rubber nya😭
di ko mabusan yung akin sobrang dikit HAHA
Tuyip
I
pde kaya electrical tape? haha
Mas maganda po double sided tape para tumagal yung dikit
Bro mine is fully cracked
Rigaz