It seems that you are aware of the charlatanism of the Colossi employees and you decided to make your own threads in the hub shell. It was a painful task to install a SG75 on the colossi low pro I received from them a couple of weeks ago, due to low quality control, parts of metal were chipping while I was tightening the taper. I'm already using SG75 in 7 other bikes, some of them I bought used, and it was always installed finger tight, like spreading butter on the bread. Then the paint on the seatpost was stripped, because they didn't install properly the seat clamp.
It’s not just them, most of the bike manufactures are not doing this final touches so we always cut paint of bottom bracket shell, clean threads, same for the head tube…
At 1:20 we cut a bit more so that bearing would sits better and to make less gap between fork and headtube. At 5:40 we cut the paint to make surface flat and make bottom bracket sitting fully inside and straight which extend bottom brackets life and prevent squeling noices.
Because by cutting in one spot saw will bend and cut it crookedly while rotating and cutting you will get perfect cut. We explained this in Cinelli Vigorelli Special White Vlog video 11:45.
It could be paint overspray or the channel for headset/BB bearings might not be perfectly flat or parallel. So the point is to eliminate any potential creaking or play in the bearings.
Exactly that’s the case with bottom bracket. Like this we make sure that bottom bracket sits 100% straight and because of that also last longer. With headtube is the same case but here we cut bottom part a bit more so the bearing sits more inside headtube and there is less gap between headtube and fork. Check RadPlatz Instagram account in one of the new videos Marc explained why we are doing that.
It's because they think the bearings are threaded 😂😂 just like the bottom bracket it actually does nothing they just do it Stupidly thinking it's gonna do something don't overthink it bruh grinding those parts is just destroying your bike
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
That dropbar!!
That was therapeutic.
Thank you! ❤️
12:05 gotta love a Continental that goes on hassle free
That’s experience 😃
@@fixiecorner facts but occasionally there’s that one that gives us the fight of our lives 🤣
@@christianishima7098 😂😂😂
love colossi
What handlebars are those 😲
BIKEDOC HB23 Sprint Track
I found a fixed gear carcai bike at my job is the good brand for starters
تصميم جميل جدا رياضي 😮😮
تسلم يادك 😮
نسر 🦅 مفترس سريع جدا 😮😮😊❤
Hello cool bike! What is the name of the golden lubricant?
It’s a copper paste
It seems that you are aware of the charlatanism of the Colossi employees and you decided to make your own threads in the hub shell. It was a painful task to install a SG75 on the colossi low pro I received from them a couple of weeks ago, due to low quality control, parts of metal were chipping while I was tightening the taper. I'm already using SG75 in 7 other bikes, some of them I bought used, and it was always installed finger tight, like spreading butter on the bread. Then the paint on the seatpost was stripped, because they didn't install properly the seat clamp.
It’s not just them, most of the bike manufactures are not doing this final touches so we always cut paint of bottom bracket shell, clean threads, same for the head tube…
Very Nice....
Thanks ❤️
shhheeeeeeeessshhhhh take my card already 🥶🥶
No worries, come by RadPlatz. 😃
نسر 🦅 جميل 😮
Awesome build but may I ask whats going on at 5:40 and 1:20? Why is that step needed?
At 1:20 we cut a bit more so that bearing would sits better and to make less gap between fork and headtube.
At 5:40 we cut the paint to make surface flat and make bottom bracket sitting fully inside and straight which extend bottom brackets life and prevent squeling noices.
@@fixiecorner Oooh that makes a lot more sense thank you haha
What brand is that dropbar? And where to buy?
BIKEDOC HB23 Sprint Track
Aliexpress, Alibaba or Velodrome.shop
where can I get the crit frame tho I have been searching everywhere for it
Contact us at info@fixiecorner.com or on Instagram and we will help you.
waiting
pls build a Cinelli Mash Histogram 2013, it is one of my dream frame.
Once someone come to us to build it we will film the process. ✌🏻
What is the price for a custom like yours?
With all parts plus labor it’s around 3000€
What the ring at 9:30 for? 🧐
It’s for a preload so you don’t overtighten bearings and ruin them.
is facing the headtube really necessary?
Not but in this case we wanted smaller gap between headtube and fork
how much
Around 3000€
10:55 why cutting the steerer like this when u have cutting guide in a bench vise? 🥴
Because by cutting in one spot saw will bend and cut it crookedly while rotating and cutting you will get perfect cut. We explained this in Cinelli Vigorelli Special White Vlog video 11:45.
linda a bike
мебель, что бы стоять в углу и собирать пыль.
Not really, it’s built to be riden and it is.
What's the theory behind grinding down the bottom bracket? Also, the head tube?
It could be paint overspray or the channel for headset/BB bearings might not be perfectly flat or parallel. So the point is to eliminate any potential creaking or play in the bearings.
Exactly that’s the case with bottom bracket.
Like this we make sure that bottom bracket sits 100% straight and because of that also last longer.
With headtube is the same case but here we cut bottom part a bit more so the bearing sits more inside headtube and there is less gap between headtube and fork.
Check RadPlatz Instagram account in one of the new videos Marc explained why we are doing that.
It's because they think the bearings are threaded 😂😂 just like the bottom bracket it actually does nothing they just do it Stupidly thinking it's gonna do something don't overthink it bruh grinding those parts is just destroying your bike