So i got all 4 signals installed and working, thanks to this great video...no thanks to Chinese distributor...but i still have hyper-flash because i havent installed the necessary resistors. What im wondering is...is it harmful to any electronics or computers to run it in hyper-flash? Cuz i like the hyper-flash...its eye catching
I did everything in the video, and the lights won’t even turn on, did I do something wrong? Also my engine light turned on as soon as I disconnected the old turning lights
It sounds like you caused a short circuit during installation. Please look through all your fuses to see if one of them blew. Then resolve the problem causing the short circuit. Finally change fuse.
10 mins eh?? Maybe if youve done it 10 times before, and you have the resistors installed, and you have all the correct mounting hardware. Fkn nightmare for me! All i got from China is 4 LED signals...and thats it!! But thankyou for enlightening me with your video. Much appreciated
I have a 2018 CB500F. Where can I find the harness converters? I've looked online & they are seemingly hard to find, not to mention whether or not they are the right fit. Do these harness converters have another name? Appreciate your help.
hmmmm....this is a strange question. We are the company that makes them. We film videos that instruct on how to install our parts. If you follow the link in the description of the video it takes you to the signal bundle we showed installed on this bike. If you want a similar thing but for the 500 then you just navigate to the appropriate category for the 500 model on our website and you will be served up with the correct parts.
I bought some barracuda turn signals and they came with bullet connectors, I cut them off and soldered the original connectors onto the wire for the turn signals and re-heat shrunk the exposed wire independently and then an outer layer around both but the turn signals don't flash despite all being wired correctly, (I can feel movement in the LEDs when I flick the turn signal switch) any idea why this might be? I'm going remove the original connector and reattach the bullet connector to the indicator and use the TST products listed above with the stem style indicators, would 2-2 be okay on a CBR650f or would i need a 3-2 (despite nothing going into the 3rd) Any advice/help given would be hugely appreciated as i'm fairly new at this and jumped in with both feet. Thank you for taking the time to read this.
The best course of action for you to get these answers is to contact our customer support through our website. There are a few missing pieces of information in your statement here that will have to be supplied for us to make some recommendations.
I have a Cbr650f do you have a video on how to install on rear plate?
If you mean fender eliminator then yes.
@@TSTindustries I’m sorry I meant do you have a video of how to install the turn signals in the rear plate not the fender eliminator
So i got all 4 signals installed and working, thanks to this great video...no thanks to Chinese distributor...but i still have hyper-flash because i havent installed the necessary resistors. What im wondering is...is it harmful to any electronics or computers to run it in hyper-flash?
Cuz i like the hyper-flash...its eye catching
this is a good Question ?
if you have stripped m6 screws, where can I buy sum?
I did everything in the video, and the lights won’t even turn on, did I do something wrong? Also my engine light turned on as soon as I disconnected the old turning lights
It sounds like you caused a short circuit during installation. Please look through all your fuses to see if one of them blew. Then resolve the problem causing the short circuit. Finally change fuse.
would you recomend to unplug the
battery?
That's not entirely necessary. If you leave ignition switch off most electrical systems aren't under power.
Great video
Glad you enjoyed it
LED in headlight as well?
All new Hondas come with Led headlights from factory.
@@soldiers303 Nice didn't know that!
Where I can buy switch winker left honda Cb650f? Can u help me?
Partzilla, mrcycles, your Honda dealer, used stuff on Ebay
Where can i get those small turning signals which you didn't install?
You can find them on our website using the link below:
tstindustries.com/tst-led-front-flushmount-turn-signals-honda.html
i know Im kinda randomly asking but do anybody know a good site to stream newly released tv shows online?
@Skyler Harlan I watch on flixzone. Just google for it =)
@Eddie Kamryn definitely, have been watching on FlixZone for months myself :)
@Eddie Kamryn thanks, signed up and it seems like a nice service :) I really appreciate it!
10 mins eh??
Maybe if youve done it 10 times before, and you have the resistors installed, and you have all the correct mounting hardware.
Fkn nightmare for me! All i got from China is 4 LED signals...and thats it!!
But thankyou for enlightening me with your video. Much appreciated
I have a 2018 CB500F. Where can I find the harness converters? I've looked online & they are seemingly hard to find, not to mention whether or not they are the right fit. Do these harness converters have another name? Appreciate your help.
hmmmm....this is a strange question. We are the company that makes them. We film videos that instruct on how to install our parts. If you follow the link in the description of the video it takes you to the signal bundle we showed installed on this bike. If you want a similar thing but for the 500 then you just navigate to the appropriate category for the 500 model on our website and you will be served up with the correct parts.
@@TSTindustries Hahaha, sorry, I haven't heard of TST, til now. I am frickin happy I found you though. :) Found the part! THANK YOU!
I bought some barracuda turn signals and they came with bullet connectors, I cut them off and soldered the original connectors onto the wire for the turn signals and re-heat shrunk the exposed wire independently and then an outer layer around both but the turn signals don't flash despite all being wired correctly, (I can feel movement in the LEDs when I flick the turn signal switch) any idea why this might be? I'm going remove the original connector and reattach the bullet connector to the indicator and use the TST products listed above with the stem style indicators, would 2-2 be okay on a CBR650f or would i need a 3-2 (despite nothing going into the 3rd) Any advice/help given would be hugely appreciated as i'm fairly new at this and jumped in with both feet. Thank you for taking the time to read this.
The best course of action for you to get these answers is to contact our customer support through our website. There are a few missing pieces of information in your statement here that will have to be supplied for us to make some recommendations.
Where do i buy the pod signal adapter kit?
on our website TSTindustries.com
Great 👌🔥😀
Idk. I feel like this makes you so much less noticeable on the road.
From what I heard it helps because it allows people on the side to see your signal blinking vs only in the front.