Came to TH-cam once again to setup my new toy - and sir you saved me and my son from some life long trauma today... This was exactly what we needed - you taught him and I a very valuable lesson - your never to young OR old to learn something new! RTFM sure, but also find people like you!! Cheers and happy installs!
Wow, you're really good at this! You're knowledgeable, easy to understand, and you have a great clear and inviting speaking voice. Thanks for the great videos!
I’ve done many cams before but never a red tiger well I hooked it up to my mustang and for the parking mode it’s saying please connect acc hardwire kit but I have confirmed which is keyed and which is battery hot always so idk if mine is mislabeled or not but the camera works with the car off no key on and works fine when the car starts so idk what’s going on
Hi S! When correctly hardwired the dash cam will turn off and enter park mode (if enabled in the dash cam's setting) when the car is off. I would have the installer check all the connections (ACC, BATT & GND) to confirm that they connected to the correct locations for ACC and BATT (I seen cases where the dash cam stays on constantly if ACC and BATT are reversed or connected to the incorrect locations that does not provide power at the correct time for both ACC and BATT) Here is my follow up detailed hardwire install if you want to see that process th-cam.com/video/K2iKXj82354/w-d-xo.html Cheers!
Hi! Here is my follow up video where I cover how I find ACC and BATT on any car th-cam.com/video/K2iKXj82354/w-d-xo.html However I strongly recommend profession installation due to the dangers mentioned on that video and the dangers mentioned on my full install video th-cam.com/video/uZp95NbNlmM/w-d-xo.html Cheers!
@@cameronwilliam653 Hi C! Here is my follow up video where I cover how I find ACC and BATT on any car th-cam.com/video/K2iKXj82354/w-d-xo.html However I strongly recommend profession installation due to the dangers mentioned on that video and the dangers mentioned on my full install video th-cam.com/video/uZp95NbNlmM/w-d-xo.html Cheers!
Hi! Most dash cams that require a 3 lead hardwire kit will usually need all 3 wires to be connected in order for the dash cam to work correctly. What I recommend when someone does not need park monitoring, is just to turn it off in the settings menu (most dash cams will let you turn off this feature) Cheers!
ok, but.. what if I don't want the dash cam running while the car is parked/off? I connected the yellow "constant power" to an ACC fuse (per instructions), both leads are now on ACC, which should only record when the vehicle is on or in accessory mode... results: when the car is running OR on ACC mode, my dash will not power on, however my phone will charge and shut off when the ignition and ACC is off, as intended... only solution I can think of is to wire the constant (yellow) to a constant fuse but then the camera will keep running after the ignition is off (according to the instructions, I don't want/need that... help?!
Hi N! Most dash cams that require a 3 lead hardwire kit will usually need all 3 wires to be connected (to their correct ACC, BATT and GND locations) in order for the dash cam to work correctly. What I recommend when someone does not need park monitoring, is just to turn it off in the settings menu (most dash cams will let you turn off this feature). Cheers!
Hi D! A Voltmeter can also be used, but I find the probe easier since it's a one hand operation here is my follow up video where I use a probe to I find ACC and BATT on any car th-cam.com/video/K2iKXj82354/w-d-xo.html I placed the link to the probe in that video's description, however I strongly recommend profession installation due to the dangers mentioned on this video if erroneously tapping a critical system of the vehicle and the dangers involved with air bags mentioned on this video th-cam.com/video/uZp95NbNlmM/w-d-xo.html Cheers!
Hi! All of the Redtiger hardwire kits use the standard 3 color wire system shown on the video (Red, Yellow and Black). Links to the kit in the video description, Cheers!
Hi G! The hardwire kit is independent of push start vehicles, no need for push start. Here is my video showing the install process th-cam.com/video/uZp95NbNlmM/w-d-xo.html if you want to see how that looks, Cheers!
Came to TH-cam once again to setup my new toy - and sir you saved me and my son from some life long trauma today... This was exactly what we needed - you taught him and I a very valuable lesson - your never to young OR old to learn something new! RTFM sure, but also find people like you!! Cheers and happy installs!
Thank you Ivan!
Wow, you're really good at this! You're knowledgeable, easy to understand, and you have a great clear and inviting speaking voice. Thanks for the great videos!
You're welcome and thank you T!
Thank you for this video. I purchased a Carpuride dash for a old ford focus. This helps a lot.!
You're welcome!
Thanks, i kind of knew how but this clarified things for me. You do great vids.
You're welcome and thank you!
thanks you did a GREAT video
You're welcome!
I’ve done many cams before but never a red tiger well I hooked it up to my mustang and for the parking mode it’s saying please connect acc hardwire kit but I have confirmed which is keyed and which is battery hot always so idk if mine is mislabeled or not but the camera works with the car off no key on and works fine when the car starts so idk what’s going on
Hi S! When correctly hardwired the dash cam will turn off and enter park mode (if enabled in the dash cam's setting) when the car is off. I would have the installer check all the connections (ACC, BATT & GND) to confirm that they connected to the correct locations for ACC and BATT (I seen cases where the dash cam stays on constantly if ACC and BATT are reversed or connected to the incorrect locations that does not provide power at the correct time for both ACC and BATT) Here is my follow up detailed hardwire install if you want to see that process th-cam.com/video/K2iKXj82354/w-d-xo.html Cheers!
On a 2021 GMC Sierra 1500 which fuse panel and fuse numbers should I use for the ACC and the B+ Thank You!!!
Hi! Here is my follow up video where I cover how I find ACC and BATT on any car th-cam.com/video/K2iKXj82354/w-d-xo.html However I strongly recommend profession installation due to the dangers mentioned on that video and the dangers mentioned on my full install video th-cam.com/video/uZp95NbNlmM/w-d-xo.html Cheers!
@@AlexAutoFun Thank you for the quick reply!!!
@Jimmayer67 You're welcome!
On Honda 2019 crv, which fuse number should be used for always power and which one for ACC
@@cameronwilliam653 Hi C! Here is my follow up video where I cover how I find ACC and BATT on any car th-cam.com/video/K2iKXj82354/w-d-xo.html However I strongly recommend profession installation due to the dangers mentioned on that video and the dangers mentioned on my full install video th-cam.com/video/uZp95NbNlmM/w-d-xo.html Cheers!
👍
What if connect red alone +black, will it work when vehicle is on?
Hi! Most dash cams that require a 3 lead hardwire kit will usually need all 3 wires to be connected in order for the dash cam to work correctly. What I recommend when someone does not need park monitoring, is just to turn it off in the settings menu (most dash cams will let you turn off this feature) Cheers!
ok, but.. what if I don't want the dash cam running while the car is parked/off? I connected the yellow "constant power" to an ACC fuse (per instructions), both leads are now on ACC, which should only record when the vehicle is on or in accessory mode...
results: when the car is running OR on ACC mode, my dash will not power on, however my phone will charge and shut off when the ignition and ACC is off, as intended... only solution I can think of is to wire the constant (yellow) to a constant fuse but then the camera will keep running after the ignition is off (according to the instructions, I don't want/need that... help?!
Hi N! Most dash cams that require a 3 lead hardwire kit will usually need all 3 wires to be connected (to their correct ACC, BATT and GND locations) in order for the dash cam to work correctly. What I recommend when someone does not need park monitoring, is just to turn it off in the settings menu (most dash cams will let you turn off this feature). Cheers!
Do I need a probe?? If so where do i buy one
Hi D! A Voltmeter can also be used, but I find the probe easier since it's a one hand operation here is my follow up video where I use a probe to I find ACC and BATT on any car th-cam.com/video/K2iKXj82354/w-d-xo.html I placed the link to the probe in that video's description, however I strongly recommend profession installation due to the dangers mentioned on this video if erroneously tapping a critical system of the vehicle and the dangers involved with air bags mentioned on this video th-cam.com/video/uZp95NbNlmM/w-d-xo.html Cheers!
I have the black wires, where is that video?
Hi! All of the Redtiger hardwire kits use the standard 3 color wire system shown on the video (Red, Yellow and Black). Links to the kit in the video description, Cheers!
😎👍
😎🍻!
How do we use this on a push button vehicle?
Hi G! The hardwire kit is independent of push start vehicles, no need for push start. Here is my video showing the install process th-cam.com/video/uZp95NbNlmM/w-d-xo.html if you want to see how that looks, Cheers!
@ thank you
You're welcome friend!
👍👍🙏🙏🇬🇧
Thank you Mvirdi, Cheers from USA!