Thank you for your video. Ive been researching how to build sheds with pallets. And your design is different. It gave me more perspective on how I will eventually build. You have some really great ideas. So, yeah....thx!!
excellent work. I work with pallets sometimes too.Removing individual boards without splitting them is hard sometimes. The pallets I get have spiral nails in them..... Unless ya have all the other materials already (nails. screws, plywood,tar paper), ,I bet it costs more than $40. ... I try to re-purpose those things too, or buy damaged goods like plywood.
I reclaim Used wood from pallets and a recycling center for old bed mattress box springs. a sawzall on the side of the pallet to just cut the nails can help prevent splits. It takes a few minutes though to get the blade in. Then just cut the middle as you go down the pallet removing the wood. There's a special air tool to move the nails quickly too. Good luck.
I'm in the process of making a shed from pallets. Only mine is not 2 pallets high. I tried removing the nails but they were way too rust, so I used wood screws for my project. I'm 70 yrs old, so it's taking me a lot longer to do it, since I'm doing it by myself. I'm using paneling for the outside and will paint it. I'm using a big tarp to cover the roof over the plywood. Next time, I will go 2 pallets inside of 1 for the walls. Thanks...
I like the way you prepped and structured the roof. So much easier to get the cripples up by anchoring them to the rafter than putting them all up and anchoring the rafter to them. Good tip for a shorty like me. Thx
Thanks for sharing your DIY Shed Project - WOW! I have thought about the idea of building a DIY Pallet Shed, but I can never find clean useful pallets. I have a very limited toolbox and I am a amateur DIY Carpenter/Electrician/Landscaper/Mason/Mechanic etc.,
I have been looking at building a Lean tube for my boat. Since my wife works at auto parts store and getting trucks each week I can get pallets for free. I figured that would be a good boat house
loved this build, cept you pushed too close to house. Mould and garden debris rot will git that siding and infiltrate your house. I say jack it up and drag it at least a rakes width away. Best of luck to you, again, great build.
Same here. The camera is still doing okay but there is definitely some issues with scratches on the lens, I'll keep using it for as long as I can though because this same model is going for even more than when I bought it two years ago now.
might consider waterproofing the wood especially near the ground any part touching the ground will rot faster , oil based paint or stain will help just to make it last longer and you probably need to keep the gaps for air flow just cover with screen or something to keep mice and critters out
So far waterproofing the wood hasn't been an issue since the asphalt paper creates a water barier for the inside, and the wood is heat treated so it takes quite a few years for it to rot or degrad to the point of needing replaced. It definitely does let in some critters but spiders and other things make it into our house as well so I think that would happen regardless of the seals haha.
Just so you know the trapping that is used as lumber covers. Is a lot better than what you can buy. And as long as it's not the lumber covers with paper on the insides. They will in most cases last more then 3 times longer than what you can buy!!
I don't normally comment on videos. Your video has been the video i have been looking for.... I don't care about measurements, i like to see the process. So many videos where they build it and then talk about it. Cool bro, but i want to see what you did when you did it. Thanks brother for this video!!! One question, how many pallets in total did you have in this build?
I keep seeing people build shed walls by stacking pallets on edge. Just screwing them together edge to edge doesn’t make a roof bearing wall. Would you stack layers of 2x’s on edge and expect them to stay put? Won’t take much to make them buckle like snow piling up against it or leaning junk up there inside or out. Don’t get me started on racking. If they put a through stud between every stacked pair it would stand a lot longer. Of course if you doubled the number of studs it took to do that and added some top and bottom plates you could make a real wall.
You started by spending some time taking about how u were going to clear the area etc. which was fine. But u then said nothing about how u were connecting the pallets together, how u were actually building the shed. I would have preferred it was the other way round. Still, great looking shed!!🙂👍
Great video. I can certainly say that the suspence was certainly worth it. The scooter shed looks superb. I really like the various weathered boards used on the outside. It gives the shed a rustic look. Nice little touch with the ramp. Certainly makes moving your scooters in and out easier. I have a question about the pallet structure of the walls. I noticed you don't over lap each layer of pallets like you'd get with a brick house. Is it for ease or would the time it take to overlap the pallets would not pay off that much in terms of rigidity? Thanks for another great video that I found entertaining and filled with useful information on producing a shed from mostly reclaimed material. Keep up the good work and like always I can't wait for your next video. Cheers.
I did the pallets that way for ease as well as a flush connection that is pretty strong. It's easier to mount them together and less wasted material that way. It is fairly rigid and the first shed I did like this as well as the workshop haven't seen any structural issues so far in either of them. We have been having lots of high winds and rain this year, a lot of it while this shed was still in construction and it didn't budge a bit. Thanks as always for the great comment, glad the wait was worth it.
Thanks for the idea for that pallet wall you did on the exterior. I'm not going to make a shed, but needed to create a wall. Realized how I can do it after watching your video. :)
I have plans for gutters on my workshop, my house, and probably this shed as well! Just waiting on saving up some money first. Gutters cost a lot more then I was thinking they would sadly.
@@DoubleBitsWorkshop have you considered a reclaim shop like habitat for humanity restore? Sometimes you find great stuff there. Also advertising need on Facebook or in the newspaper.
Use scrap pieces of stinger 2x4 to slide from pallet end to another pallet end. If two pallets are side by side use long screws to drive through one pallet into another.
A rough estimate for the size pallets I had access to... From what I'm seeing for the boards I had on hand plus the pallets I took apart in the video... Around 80 full pallets. Which is a lot better then the 120+ I used to make my shop! And I had some barn wood for my beams and trusses on my shop!
You're definitely on to something there, though we have spiders in every structure in our area, including our house and cars! Spraying once a year cuts down on them marginally though.
That's awesome. I would put a drip edge up on the bottom and side edges of the roof though to prevent the roof wood from rotting on the edge.
I have a huge 10x12 heavy duty tarp over the top. We get rain and snow in the winter. Thanks for the tip
Thank you for your video. Ive been researching how to build sheds with pallets.
And your design is different. It gave me more perspective on how I will eventually build. You have some really great ideas. So, yeah....thx!!
you definitely know how to make things happen. Nice work.
Omg....that's just too good. Please tell me you're related to Ted!
excellent work. I work with pallets sometimes too.Removing individual boards without splitting them is hard sometimes. The pallets I get have spiral nails in them..... Unless ya have all the other materials already (nails. screws, plywood,tar paper), ,I bet it costs more than $40. ... I try to re-purpose those things too, or buy damaged goods like plywood.
Yes in the description I mention that without having some materials on hand it will cost more but that was what it cost me personally.
I reclaim Used wood from pallets and a recycling center for old bed mattress box springs. a sawzall on the side of the pallet to just cut the nails can help prevent splits. It takes a few minutes though to get the blade in. Then just cut the middle as you go down the pallet removing the wood. There's a special air tool to move the nails quickly too. Good luck.
ogether
I'm in the process of making a shed from pallets. Only mine is not 2 pallets high. I tried removing the nails but they were way too rust, so I used wood screws for my project.
I'm 70 yrs old, so it's taking me a lot longer to do it, since I'm doing it by myself. I'm using paneling for the outside and will paint it. I'm using a big tarp to cover the roof over the plywood.
Next time, I will go 2 pallets inside of 1 for the walls. Thanks...
I like the way you prepped and structured the roof. So much easier to get the cripples up by anchoring them to the rafter than putting them all up and anchoring the rafter to them. Good tip for a shorty like me. Thx
Cool project. Thank you for the door inspiration!
This is great ... I need to build an old chicken coop and you gave me great ideas.
Thanks for sharing your DIY Shed Project - WOW! I have thought about the idea of building a DIY Pallet Shed, but I can never find clean useful pallets. I have a very limited toolbox and I am a amateur DIY Carpenter/Electrician/Landscaper/Mason/Mechanic etc.,
I have been looking at building a Lean tube for my boat. Since my wife works at auto parts store and getting trucks each week I can get pallets for free. I figured that would be a good boat house
I think i would have spent $4 more for one more level of bricks off the ground to prevent any rot and have air flow under it
So far so good, but that's the beauty of the design, it can always be improved upon.
Amazing work I love it and alot ideas come from you
loved this build, cept you pushed too close to house. Mould and garden debris rot will git that siding and infiltrate your house. I say jack it up and drag it at least a rakes width away. Best of luck to you, again, great build.
I'm going to adapt your design to build myself an outhouse. Thankyou so much.
Great job!! Looks good! Lol I forgot about the camera scare. So glad it still worked after you cleaned up.
Same here. The camera is still doing okay but there is definitely some issues with scratches on the lens, I'll keep using it for as long as I can though because this same model is going for even more than when I bought it two years ago now.
Let me know if you don’t want some of that scrap metal I’d be more than happy to take some of it off your hands bro!! Keep up the great work !
might consider waterproofing the wood especially near the ground any part touching the ground will rot faster , oil based paint or stain will help just to make it last longer and you probably need to keep the gaps for air flow just cover with screen or something to keep mice and critters out
So far waterproofing the wood hasn't been an issue since the asphalt paper creates a water barier for the inside, and the wood is heat treated so it takes quite a few years for it to rot or degrad to the point of needing replaced. It definitely does let in some critters but spiders and other things make it into our house as well so I think that would happen regardless of the seals haha.
Just so you know the trapping that is used as lumber covers. Is a lot better than what you can buy. And as long as it's not the lumber covers with paper on the insides. They will in most cases last more then 3 times longer than what you can buy!!
I don't normally comment on videos. Your video has been the video i have been looking for.... I don't care about measurements, i like to see the process. So many videos where they build it and then talk about it. Cool bro, but i want to see what you did when you did it. Thanks brother for this video!!! One question, how many pallets in total did you have in this build?
Around 80 in total. But the pallets I have access to can be more medium to small pallets
And thank you! Thanks for commenting!
You should paint it so that it lasts longer. Great job on sustainability!
Great job 😊
I keep seeing people build shed walls by stacking pallets on edge. Just screwing them together edge to edge doesn’t make a roof bearing wall. Would you stack layers of 2x’s on edge and expect them to stay put? Won’t take much to make them buckle like snow piling up against it or leaning junk up there inside or out. Don’t get me started on racking. If they put a through stud between every stacked pair it would stand a lot longer. Of course if you doubled the number of studs it took to do that and added some top and bottom plates you could make a real wall.
It's a pallet build, settle down Peter.
Yes some 1x4s would also work. Good thing it's just a shed and not a livable structure.
what about corrugated plastic roof? not too heavy.,
You started by spending some time taking about how u were going to clear the area etc. which was fine. But u then said nothing about how u were connecting the pallets together, how u were actually building the shed. I would have preferred it was the other way round. Still, great looking shed!!🙂👍
Great video. I can certainly say that the suspence was certainly worth it. The scooter shed looks superb. I really like the various weathered boards used on the outside. It gives the shed a rustic look. Nice little touch with the ramp. Certainly makes moving your scooters in and out easier.
I have a question about the pallet structure of the walls. I noticed you don't over lap each layer of pallets like you'd get with a brick house. Is it for ease or would the time it take to overlap the pallets would not pay off that much in terms of rigidity?
Thanks for another great video that I found entertaining and filled with useful information on producing a shed from mostly reclaimed material.
Keep up the good work and like always I can't wait for your next video. Cheers.
I did the pallets that way for ease as well as a flush connection that is pretty strong. It's easier to mount them together and less wasted material that way. It is fairly rigid and the first shed I did like this as well as the workshop haven't seen any structural issues so far in either of them. We have been having lots of high winds and rain this year, a lot of it while this shed was still in construction and it didn't budge a bit.
Thanks as always for the great comment, glad the wait was worth it.
Anyone else sketched out by the flip flops and working around rusty nails? Other then that good job!
My wife gets after me about it all the time! After working in boots all day I hate wearing them when it's hot outside at home too.
Thanks for the idea for that pallet wall you did on the exterior. I'm not going to make a shed, but needed to create a wall. Realized how I can do it after watching your video. :)
Very nice. I've got a access to rather new free pallets. Hopefully my hoa don't give me beef about this.
I couldn't see how you attach the lower walls to the base? How do you hammer through the outside
How are you securing the pallets together for the walls?
Great job. 👍 Are you considering installing guttering and a water butt to save the rainfall?
I have plans for gutters on my workshop, my house, and probably this shed as well! Just waiting on saving up some money first. Gutters cost a lot more then I was thinking they would sadly.
@@DoubleBitsWorkshop have you considered a reclaim shop like habitat for humanity restore? Sometimes you find great stuff there. Also advertising need on Facebook or in the newspaper.
About how many pallets did you use, i would have to make it 2foot longer as my triumph america is 8ft long.
How did you join the pallets together on the floor, the pallets that you cut to the full pallets?
Use scrap pieces of stinger 2x4 to slide from pallet end to another pallet end. If two pallets are side by side use long screws to drive through one pallet into another.
Is it strong wall with out a pole to hold it?
It is very sturdy
3 lluvias le doy antes q se salga todo de cuadra
How waterproof is it?
How many pallets do you estimate you used in total for the entire project?
A rough estimate for the size pallets I had access to... From what I'm seeing for the boards I had on hand plus the pallets I took apart in the video... Around 80 full pallets. Which is a lot better then the 120+ I used to make my shop! And I had some barn wood for my beams and trusses on my shop!
👍👍👍
I'm use my pallets laying around in the backyard to build a shed 👍
looks pretty sturdy.....made me tired... I need a sleep now
Did you use staples and a Brad nailer?
Brad nailer for the paper and long Brad nail/some screws for the outer layer and screws for the main construction
@@DoubleBitsWorkshop that’s awesome, thanks for replying. I’m gonna make a little play house for my daughter this spring.
I saw a comment that said you used 80 pallets. Why am I only counting about 30 or so in the video. Am I missing something?
Ah! It's the count for the additional boards used for the face of the sides and door! I didn't film myself tearing down every pallet. :-)
Thank you I could do that I'm beginner
You only downside of this design is spiders. You got to spray it once in awhile because spiders love to hang out inside of pallets.
You're definitely on to something there, though we have spiders in every structure in our area, including our house and cars! Spraying once a year cuts down on them marginally though.
safety ??
…..salvaged shingles?
Free left overs from garage sales or asking at residential construction sites
😮❤
Why is it necessary to show clean upwork and commentate on it?
10x more work dong it this way, OK if you have the time and effort, most don't.
This is definitely an option for someone who has time but not a lot of money.