I found the same with mine. After removing the shaft from the long end of the roller. Circlip was found rattling around inside the roller. Replaced with new Circlip..... Jobs a goodun!
Bloody bought a belt based on the stupid schematics for a 475 hrb to find this out. All the bloody blurbs point to a belt and there is none. Not going to order a circlip yet, but I wouldn't be surprised I did hear a rattle when I got given it. Now I have a useless belt.
Hi guys - have repaired roller but there is lateral movement in roller( side to side ) - bearings are ok so could it be circlip in long end of roller that is worn ?
If you have a gap in the roller, sometimes stones can get in and stop the roller. Or the gearbox is broken. Have you dragged it over any gravel recently?
Good Video, very helpful !
I found the same with mine. After removing the shaft from the long end of the roller. Circlip was found rattling around inside the roller.
Replaced with new Circlip..... Jobs a goodun!
Good to hear 👍 always the roller to have problems first in our experience but they do a lot of work
Bloody bought a belt based on the stupid schematics for a 475 hrb to find this out. All the bloody blurbs point to a belt and there is none. Not going to order a circlip yet, but I wouldn't be surprised I did hear a rattle when I got given it. Now I have a useless belt.
Do the rollers move independently on this model ?
1 is the drive, and the other is independent
Hi guys - have repaired roller but there is lateral movement in roller( side to side ) - bearings are ok so could it be circlip in long end of roller that is worn ?
Hi Tom. It's difficult for me say without taking it apart myself. If you can take it apart It's a good exercise and remove any dirt inside.
Hi my rare Honda 2019 pro rare roller is jammed do you know the reason why? Please mate
If you have a gap in the roller, sometimes stones can get in and stop the roller. Or the gearbox is broken. Have you dragged it over any gravel recently?