Hello Scott, simultaneous move refers to moving two sources at the same time, for example you have Brian as a source, and you also have another source (i.e. MainCam) Then you set move filters for Brian (such as Brian1 and Brian2) and the same for your MainCam (MainCam1 and and MainCam2) then you can set Simultaneous Move (in Brian2) to activate the move transition for MainCam2, so when Brian2 (filter) becomes active it will also trigger MainCam2 then both sources Brian and MainCam will move to what you have set for each corresponding Move transition Filter. Also another tip, if you have MIDI Controller (i.e. Xtouch mini) you can trigger the move transition filter using the OBS-MIDI plugin and setting a midi key to trigger the filter by hotkey name, this works even if you don't define a specific hotkey combination for the filter. This is great for DJs because they will probably have a MIDI Controller laying around, and it is great to replace something like the Elgato Stream Deck or the use of Touch Portal since the midi controller has physical keys and there are some MIDI controllers cheaper than a stream deck.
Hello Scott, I just wanted to thank you for all your tutorials on the Obs. You've made my life as a teacher/streamer way easier! Now, I haven't gone through all your tutorials yet, but it'd be great if you told us how you produce these divisions in your screen with the yellow lines and the blue circle with your image going up to the right corner!
Hey Scott. I love your channel. Very informative and entertaining. I don't know if this was mentioned but the reason you would want to use the show/hide filter instead of hotkeys is if you use something like Touch Portal. You can make a button on your Touch Portal that will turn scene filters on and off. Basically the command is "Turn for scene (choose scene) filter (choose filter) (on/off)"
I found a way to achieve this. @Scott Fichter, you wanted to know where you could use the Start Delay for; I have a pop up that starts/shows every x second (the interval trigger I've setup with Lioranboard). By delaying the start response I keep the animation out of my screen for x amounts of seconds. If I don’t use the Start Delay the image keeps popping up immediately. I hope that makes sense, it's difficult to explain via words. There’s probably another way to achieve an popup image like this, but this works for me. If you have another idea, I'd like to hear it.
Hi Scot love the work u do, question ❓ I try to use four camera in on scene and try to move it by move source in the same scene However obs doesn't save my settings when I hit my hot keys. I check the filters it show up in it's right order but just can get it to move seems like it resets. Help?? Thanks
Scott, Interesting technique might want to give a warning of the flashing lights lol. Had lots of helpful information always appreciated man have a great week 👋😎
Hey! I'm using your suggestion for switching sources inside a scene to try and show two different scenes by pressing a hotkey. (basically switching from program a to program b and back again). But the problem is, using your settings, the Sources just climb up my source list, they don't switch back and forth. I put them at the bottom of my list of sources because they have to be under my overlay, but they keep climbing the list and putting themselves above the overlay. Is there a reason for this? Does it have to do with the position number? If you could let me know, I'd really appreciate it.
Hi Scott, Hope you don't mind me suggesting a possible topic. My OBS is getting quite advanced thanks to learning so much from your videos ... then I was thinking what would happen if my laptop were to break, I would lose so much work. I had a quick look in your video history and couldn't see how I could save my OBS somehow to another computer? Thanks
Hey Scott, I am trying to get this to work with nested scenes. I have a scene set up with 25 images that were exported from Powerpoint. Depending on the image I have it set up to where my camera resizes and moves to a different location automatically. The problem with this is it is always a hard cut. So I am trying to get the move transition to work on this setup so that the cuts are smooth, maybe even animated. Any thoughts? Should I apply the filter to the scene with the images or to the main scene where I have nested the images scene?
@@ScottFichter Thanks. Unfortunately the reason I use nested scenes out weighs my desire to use "move". I set up 4 live streams a week for a different channel and each live stream will have 10-30 different graphics and using nested scenes along wit touch portal commands is a major time saver on the preparation. I wonder if the ability to do transitions on the sources in the coming update will work...
@@ScottFichter First let me say how impressed I am with you taking time to respond and trying to help me. I am floored by your kindness and commitment. So, here is my set up: I have a Nested Scene with 20 Images. These images are either "2 Panel" or "3 Panel" The nested scene also has 2 camera configurations. One with the camera cropped and centered for the "2 Panel" graphic and the other even smaller in the top left for the "3 panel" graphic. All of these sources are set to "hidden" I then have this nested scene placed in my main scene at the top. This places the scene over my full screen camera. Now I have buttons programed in Touch Portal that will "show" the chosen graphic along with it's corresponding camera configuration. At any given time I can do the following: 1. Just have full screen (no graphic selected) 2. Press a button and have that graphic with it's camera configuration 3. Press the same button again and go back to full screen 4. Press a different button and automatically turn off the previous button as well as "hide" the graphic and its corresponding camera configuration while simultaneously "showing" the new graphic with its corresponding camera configuration . The only issue is that the "cut" between these changes is a hard cut and sometimes appear as a flicker or flash. So it would be very cool if the "transitions" could look smoother. Even a simple fade would be better.
Hello Scott and World, do anyone why hotkeys aren't working for my Mac setup? I volunteer for my church and it would help out so much of I could find a solution.
That's great, but it doesn't seem to work in studio mode. It will only animate in the preview, not the actual output. Same problem with the older plugin that inspired Move Transition, motion-effect. Such a shame.
Hello Scott.. Help Me Out!! How can I exclude OBS screen using Display Capture. I know there is option of Window Capture But I want to Use Display capture for my coding classes. Reason I want to exclude OBS window, because I want to switch Scenes in Live Streaming but when I try it it shows OBS window which seems absurd during LIVE stream
Raman, you want "window capture" then when you presented with properties you will see a "window" pulldown. The pulldown will list every program running on your computer. If you're using Brackets or Notepad ++ select that program or equivalent. BOOM! You should be good. If you don't already have two monitors I highly suggest it. It's the best investment a live streamer can make.
@@ScottFichter no Scott I want to use display capture only as in my coding classes I need to shift to different windows. I just want obs screen does not show up when I switch scene on live stream Or is it possible to select 2 or 3 windows in window capture..that will solve my problem
@@ridhima.crazygirl Correct, you don't want to see the interface. Right? Wait, what program are you using when you do the coding? This is very difficult to troubleshoot when I can't see what you seeing.
@@ScottFichter Scott I basically uses np++ for coding and browser for output. When I switch scene using obs in live , display capture show the obs screen too..
@@ridhima.crazygirl Raman, lets approach the solution by first making sure I clearly understand the objective. You conducting a live stream. You have PC with a single monitor. You are educating students on how to code. You are using OBS to show your various computer screens and you are streaming to TH-cam. Is this Correct? If this is correct. Using "Display Capture" is not the solution. "Window Capture" is the solution.
@@ScottFichter Sorry for the late reply...Almost asked Who's Camtasia 😂. I use Premiere Pro...just thought that it's an OBS trick that you use. Thanks for the GREAT content 🙏
Hello Scott, simultaneous move refers to moving two sources at the same time, for example you have Brian as a source, and you also have another source (i.e. MainCam) Then you set move filters for Brian (such as Brian1 and Brian2) and the same for your MainCam (MainCam1 and and MainCam2) then you can set Simultaneous Move (in Brian2) to activate the move transition for MainCam2, so when Brian2 (filter) becomes active it will also trigger MainCam2 then both sources Brian and MainCam will move to what you have set for each corresponding Move transition Filter.
Also another tip, if you have MIDI Controller (i.e. Xtouch mini) you can trigger the move transition filter using the OBS-MIDI plugin and setting a midi key to trigger the filter by hotkey name, this works even if you don't define a specific hotkey combination for the filter. This is great for DJs because they will probably have a MIDI Controller laying around, and it is great to replace something like the Elgato Stream Deck or the use of Touch Portal since the midi controller has physical keys and there are some MIDI controllers cheaper than a stream deck.
OH SNAP! Of course! Thank you Musa! Oh wow I'm so making another video on this plugin. Thanks man
@@ScottFichter Thank you for your great content and for reading the comments. Hope to see what you create next.
Another excellent video Scott, I really love all the tutorials you do, thank you so much!
Glad you like them!
Hello Scott, I just wanted to thank you for all your tutorials on the Obs. You've made my life as a teacher/streamer way easier! Now, I haven't gone through all your tutorials yet, but it'd be great if you told us how you produce these divisions in your screen with the yellow lines and the blue circle with your image going up to the right corner!
I like those demos. Brian talks!
Ha! I thought you'd like that.
Your timing of these Move Transition tutorials are perfect! Thanks :D
Great to hear. I love it when a plan comes together. th-cam.com/video/NsUFBm1uENs/w-d-xo.html
Bravissimo scott. e grazie
Grazie Fratello
You are such an awesome teacher sir! My go to channel for OBS tuts. All the way from Sri Lanka :)
Thank you Errol! Best wishes from Pennsylvania USA!
Hey Scott. I love your channel. Very informative and entertaining. I don't know if this was mentioned but the reason you would want to use the show/hide filter instead of hotkeys is if you use something like Touch Portal. You can make a button on your Touch Portal that will turn scene filters on and off. Basically the command is "Turn for scene (choose scene) filter (choose filter) (on/off)"
Great point! Thanks MCGamerDad!
you really simplified it and made it easy to understand, Great video
Thank you my friend. I'm happy that you are getting close to the almighty 10K
Thx so much for your OBS Tutorials.
Sure Remo. More is coming.
Thank you for the video. I have a question; Is there a way to set an interval? Example; an image pops up every x seconds automatically.
I found a way to achieve this. @Scott Fichter, you wanted to know where you could use the Start Delay for;
I have a pop up that starts/shows every x second (the interval trigger I've setup with Lioranboard). By delaying the start response I keep the animation out of my screen for x amounts of seconds. If I don’t use the Start Delay the image keeps popping up immediately. I hope that makes sense, it's difficult to explain via words. There’s probably another way to achieve an popup image like this, but this works for me. If you have another idea, I'd like to hear it.
this thing made my so much work easier
this plugin is good
Great video and you explain everything which is what I need, thank you
Madas37, If you have new OBS skills I have succeeded at my goal. Thanks bud.
Hi Scot love the work u do, question ❓ I try to use four camera in on scene and try to move it by move source in the same scene However obs doesn't save my settings when I hit my hot keys. I check the filters it show up in it's right order but just can get it to move seems like it resets. Help?? Thanks
i move my cam to different spots on the screen, and simultaneous move on the border or another src as well to animate them together as an example.
Great tutorial Scott 👍✌️
Thanks Andy. That last song you made was great. Is "Running" part of an album that you produced?
@@ScottFichter Yes Scott its the first track on the album 👍✌️
Scott, Interesting technique might want to give a warning of the flashing lights lol. Had lots of helpful information always appreciated man have a great week 👋😎
I'm thinking... hugh... what flashing lights. Then I realized you're talking about the switching layer order. HA. Thanks man. I hope you're well.
Hey! I'm using your suggestion for switching sources inside a scene to try and show two different scenes by pressing a hotkey. (basically switching from program a to program b and back again). But the problem is, using your settings, the Sources just climb up my source list, they don't switch back and forth. I put them at the bottom of my list of sources because they have to be under my overlay, but they keep climbing the list and putting themselves above the overlay.
Is there a reason for this? Does it have to do with the position number? If you could let me know, I'd really appreciate it.
Hi Scott, Hope you don't mind me suggesting a possible topic. My OBS is getting quite advanced thanks to learning so much from your videos ... then I was thinking what would happen if my laptop were to break, I would lose so much work. I had a quick look in your video history and couldn't see how I could save my OBS somehow to another computer? Thanks
KABOOM!!!!!!!! This video will show you have to save e v e r y t h i n g th-cam.com/video/wMPwLNQw8E8/w-d-xo.html This is for PC users.
@@ScottFichter Cheers Scott that is awesome. Thanks so much great help😊👍
Nice one.. Thank you..
Welcome 😊
ur obs skills are ridiculous Scott! ✌ Great vid sir 👍
Hey Killa! Good to hear from you bud. Thanks man.
@@ScottFichter thx Scott u too brother!!!
I think the start delay is probably if you want multiple things to happen on one hotkey, but don't want it to be perfectly simultaneous.
Ah! Yes, that makes sense. Thanks for the comment dude.
oh that makes sense
Hey Scott, I am trying to get this to work with nested scenes. I have a scene set up with 25 images that were exported from Powerpoint. Depending on the image I have it set up to where my camera resizes and moves to a different location automatically. The problem with this is it is always a hard cut. So I am trying to get the move transition to work on this setup so that the cuts are smooth, maybe even animated. Any thoughts? Should I apply the filter to the scene with the images or to the main scene where I have nested the images scene?
Nested scenes throw a monkey wrench into the mix because all the sources are under the umbrella of the parent name. I suggest not using nested scenes.
@@ScottFichter Thanks. Unfortunately the reason I use nested scenes out weighs my desire to use "move".
I set up 4 live streams a week for a different channel and each live stream will have 10-30 different graphics and using nested scenes along wit touch portal commands is a major time saver on the preparation.
I wonder if the ability to do transitions on the sources in the coming update will work...
MC, you can move the camera source automatically within a scene but it sounds like you need that auto camera motion on all scenes. Right?
@@ScottFichter First let me say how impressed I am with you taking time to respond and trying to help me. I am floored by your kindness and commitment.
So, here is my set up:
I have a Nested Scene with 20 Images. These images are either "2 Panel" or "3 Panel" The nested scene also has 2 camera configurations. One with the camera cropped and centered for the "2 Panel" graphic and the other even smaller in the top left for the "3 panel" graphic. All of these sources are set to "hidden"
I then have this nested scene placed in my main scene at the top. This places the scene over my full screen camera.
Now I have buttons programed in Touch Portal that will "show" the chosen graphic along with it's corresponding camera configuration.
At any given time I can do the following:
1. Just have full screen (no graphic selected)
2. Press a button and have that graphic with it's camera configuration
3. Press the same button again and go back to full screen
4. Press a different button and automatically turn off the previous button as well as "hide" the graphic and its corresponding camera configuration while simultaneously "showing" the new graphic with its corresponding camera configuration .
The only issue is that the "cut" between these changes is a hard cut and sometimes appear as a flicker or flash. So it would be very cool if the "transitions" could look smoother. Even a simple fade would be better.
Love your videos! Is there a way to add a audio effect to the move?
you mean like changing sound?
@@ScottFichter Like have a sound play when the move is activated like a swish sound or a robotic moving sound
@@realTopdaT Yes, that's dooable. I'll have to make a tutorial
Hello Scott and World, do anyone why hotkeys aren't working for my Mac setup? I volunteer for my church and it would help out so much of I could find a solution.
Will this fix it. th-cam.com/video/sxxkYrelJYU/w-d-xo.html
That's great, but it doesn't seem to work in studio mode. It will only animate in the preview, not the actual output. Same problem with the older plugin that inspired Move Transition, motion-effect. Such a shame.
Any idea why my gms softs different?
This doesn't work on grouped items?
Hello Scott..
Help Me Out!!
How can I exclude OBS screen using Display Capture. I know there is option of Window Capture But I want to Use Display capture for my coding classes.
Reason I want to exclude OBS window, because I want to switch Scenes in Live Streaming but when I try it it shows OBS window which seems absurd during LIVE stream
Raman, you want "window capture" then when you presented with properties you will see a "window" pulldown. The pulldown will list every program running on your computer. If you're using Brackets or Notepad ++ select that program or equivalent. BOOM! You should be good. If you don't already have two monitors I highly suggest it. It's the best investment a live streamer can make.
@@ScottFichter no Scott
I want to use display capture only as in my coding classes I need to shift to different windows.
I just want obs screen does not show up when I switch scene on live stream
Or is it possible to select 2 or 3 windows in window capture..that will solve my problem
@@ridhima.crazygirl Correct, you don't want to see the interface. Right? Wait, what program are you using when you do the coding? This is very difficult to troubleshoot when I can't see what you seeing.
@@ScottFichter Scott I basically uses np++ for coding and browser for output.
When I switch scene using obs in live , display capture show the obs screen too..
@@ridhima.crazygirl Raman, lets approach the solution by first making sure I clearly understand the objective. You conducting a live stream. You have PC with a single monitor. You are educating students on how to code. You are using OBS to show your various computer screens and you are streaming to TH-cam. Is this Correct? If this is correct. Using "Display Capture" is not the solution. "Window Capture" is the solution.
Love your videos, but FYI that "Brian" pic is actually a very young Bill Gates.
media0.giphy.com/media/1IjdYvJWYS31C/giphy.gif
How do you zoom in and out of the screenshare?
I have a video editor called Camtasia.
@@ScottFichter Sorry for the late reply...Almost asked Who's Camtasia 😂. I use Premiere Pro...just thought that it's an OBS trick that you use. Thanks for the GREAT content 🙏
@@parentalalienationinterven9333 LOL there's no way I could do visually what I do with OBS. It would take me a year to make one video.
@@parentalalienationinterven9333 Premier is 3x more complex than Camtasia. It's good software but to complex for me.
wait how is he recording
Camtasia
@@ScottFichter oh ok
1 st viewer
GETSUM Prazwol
@@ScottFichter hi scott I like your video so much you have help me you are a going to be famous 1 day.
@@ScottFichter And also thank u so much