Impressive. I like them both but it looks like the durocut 44 with the 4 string head cuts the best. I’ve spent hours and hours cutting similar conditions with the FS250. That’s why I’m looking at the big boy model.
FS250 is brilliant machine so light so much power. Take the spark arrester out and it will go a little better too and won't carbon up. Take the guard off and get a speedfeed head it will be as faster in these conditions than these 560's with guards still fitted. but remove the guards from these 560's and they will be very fast The only issue with these big machines is they are slow to change directions from left to right as its a lot of weight. In short grass 250 is the faster machine.
Very impressive! The only thing I concerned is about the safety while both of you demonstrating the machine. Mind your distance at least 25m away as if there any flying object might be dangerous. Again dont forget the basic PPE while operating such machine.
Hello, thanks for the advice I totally agree with you, we dare to work so close to each other because I know the terrain and it’s very clean without no debris whatsoever, 🙋♂️
I work with these machines and I know how accidents happen with flying objects. The cameraman has been very brave to stand so close and in front. Never the operator should work so close and never one should use the machine facing another person. Glad nothing has happened.
Agree 100%, more people should know this, im wishing a working face mask, and a triangular brush blade for christmas tomorow :D, Merry christmas btw, and i know from my line trimmer that with only glasses i sometimes get small stones, dirt and grass on my face, im 14, and i bought this used km 131 lately, and almost haven't used it but a litlle, and i won't use it again until i get a face mask :D @@machinesdequalite
Stihl is a very good brand. But for this kind of work (meadow mowing), I would rather choose a lighter brushcutter with a smaller engine capacity, due to consumption and also less strenuous work. Alternatively, a different type of mower, not a brushcutter. The 10 kg weight of the brushcutter is crazy if you have to work with it for several hours a day. A good but also powerful brushcutter with high-quality components does not weigh more than 8.5 kg, ideally between 6 and 8 kg. I had a Stihl FS 450, but I sold it because compared to my second brushcutter at home - a 24-year-old Honda UMT 28 D, it had almost double the consumption and was also heavier. Honda mows everything like an STIHL but for less money. I would recommend buying these strongest STIHL brush cutters only to companies that use them every day for several hours (if they don't mind higher fuel consumption), or use them in the forest with a disc intended for that purpose. For regular users and households who mow the grass once every few days or weeks, as I do, while I mow 5 -7 hours a day, there are much better brush cutters, but with a smaller engine capacity (from 28 - to approx. 36 cc), precisely because of consumption and weight. I have had an excellent experience with Honda. Brush cutter maintenance is also important (mainly cleaning the air filter) and even more important is the correct oil ratio, I use red STIHL and especially high-octane E 5 gasoline. Especially in older brush cutters, never refuel or mix E 10 gasoline with a higher ethanol content of up to 10 % (alcohol). It destroys rubber hoses and various seals that were not adapted to it from the factory. I'm just filming and uploading parts of a service tutorial for my Honda brush cutter on TH-cam to my channel. I mix STIHL red oil and high-octane (100) E 5 in a ratio of 1 : 40 and I am very satisfied with the performance, super consumption, and also with the fact that my Honda brush cutter has been working for me motorically without problems for almost 25 years. I just had a problem with one rubber tube when I was refueling with new E10 gasoline for a while, which replaced Natural 95 gasoline at gas stations in Slovakia after 2020. After one rubber tube broke, I'm already refueling with a few cents more expensive, but much better quality gasoline E 5, with which the brushcutter has higher performance, lower consumption, and does not clog the fuel system. If I were to buy a Stihl again, so that I would like to use it every day, I would probably rather buy a smaller, but also professional STIHL FS 311, precisely because of better consumption and lower weight. Greetings from Slovakia.
Hello, thanks for the advice, I agree with you, indeed the big machines are heavy but also when I go to work I can cut a lot more faster with them especially with the brush knife or with the trimmer heads, greetings from Romania,🙋♂️
Super brawo na koszacej Pani nawet nieźle jej to koszenie idzie Lab bo Pan to profesja nic dodać nic ująć ja mam kosę sthil FS 260 Nimi marzeniem jest mieć kosę FS 550 super robota 🇲🇨🇲🇨👍👍👒👒Laleczki i pozdrowionka od Rafała z Polski a zaraz się zabieram za oglądanie Pana filmy o pile akumulatorowej👍
Excelente video. Pero es importante usar lentes o anteojos para realizar todo tipo de trabajo en estas máquinas. Ya que el golpe de la basura llega a los ojos. Saludos desde Guatemala
This machine don't cut grass, they vaporize it ! ! ! 😂 I own the FS 460 machine and i can say its really the most polyvalent machine from Stihl with very good confort and consumption, i'm sure that with the new stihl harness Xtreem i could cutting grass all day long without effort. 560/561 are really "beast' for forestry and very hard task, nothing my brushcutter can't do, but, less easier !
Eu trabalhei com o meu 45 minutos mais ou menos depois despejei a gasolina toda e deixei ele ao relantim ate que a gasolina termina e agora ja esta sem trabalhar faz em novembro 2022 um ano.sera que vai acontecer alguma coisa de mal ao motor.falo do stihl 560 em Portugal
Their is a new trimmer head out there it is called auto speed feed trimmer head from Stihl fs56 RC string trimmer I don't know if it fits all the other Stihl weed eaters out there
Good review but notice the machines are at maximum revs and basically at low load. This is like driving your car in 1st gear on the highway. You will get there eventually but its slow. With that much power you need to take the guard off and let the string out a lot more. You should be able to cut a 600mm swath maybe more depends on how the string behaves. I go until it starts to wrap around the head and then i know I've gone 1 bump too many. I cut farm hills for up to 8 hours at a time. I don't have time to be cutting with those silly push in strings. They wear down and then you are only cutting 400mm then you have to stop and put new ones in again. I carry heaps of extra line and a speed feed head. Keep bumping it and maintaining huge cutting path.
Hello, thanks for the advice , I agree with you the machine indeed it’s at maximum revs, me personally I like to cut the grass always with the deflector on ,now for this big machine like in the video I have a new guard with a bigger cutting diameter ( 480 mm ) , if the grass it’s big and thick even with this big machine it will be a struggle to cut without guard and like you said 600 mm I think it’s too much in big and thick grass, smaller grass I think it can handle it, greetings,🙋♂️
Hello with a full tank we work approximately the same amount of time, but the tank of Fs 561 it’s slightly bigger so the consumption it’s slightly higher,🙋♂️
Hi Csabi, I have fs560 and autocut 56-2 with that same nylon, but 3mm. When using full throttle within a few minutes, the surface of this nylon is PARTIALLY melted, ie baked (when using a 2mm nylon that comes with the head when purchased, then it is melted along its ENTIRE length). This is manifested in the fact that when I hit the ground with the cutting head, the nylon does not come out, and does not come out because it is melted. When I squeeze the gas and release it immediately and so on throughout the cutting, then it can last a longer time. When I cut wet grass, it can be seen that the moisture on the head evaporates due to the heat. What would be the advice, ie does this type of lubrication have a system error, because now, as I see fs561, it is exactly the same, it only has an added screw for lubricating the head, or is only my cutter defective or is it something else?
Hello, you are not the first person who tell me about this problem, honestly to be I don’t know why it’s melting the trimmer line, when it was the last time that you added grease into the gearbox of the brushcutter, I guess that it doesn’t have enough grease and that why it’s overheating, with my brushcutters I never occurred this problem. My opinion that you should take it into a service to check it out and add some grease, in the new model the Fs 561 after every 25 hours of work we have to ad 7-5 g grease into the gearbox. Greetings hope you will fix your brushcutter 🙋♂️
I'm glad I'm not the only person having this problem... your post is a couple of years old.. did you find a solution? I think I'm going to try the fix length line either the Stihl Durocut or the Oregon Jet-fit...
Szia! Megéri beruházni az Fs 560/561-re esetleg? Nekem egy fs 460 van, elég gyakran használom, bozótvágástól megkezdve nagyobb területek kaszálásáig. Az 560-sok nem túl nehezek már? Erőben annyival meggyőzőbb?
Hello az igazsag hogy sokal erosebb es nehezeb egy Fs 560/561 , ha sokat fogsz vele dolgozni megeri mert sokal erosebb es nagyob keseket rakhatsz a gepre es hamarab fejezed be a melot…….. ezt te magadnak kel eldonteni ha megeri, 🙋♂️
Здравствуйте, я сам лично имею Stihl FS490 C-EM, а FS560 C-EM только держал в руках, но не работал ею. В 490 рабочий объём 51,6 см куб в 560 57,1, мощность 3,3 к.с. против 3.8, вес 9,3 кг против 10,2 кг. У обоих мотор 2-Mix с технологией M-Tronic, баки по 0,99 л, диаметр покоса 480 см. Длина штанги у 560 176 см, а в 490 180 см, но в 560 штанга и редуктор толще. Комплектации отличается в зависимости от того где покупаете, в основном 490 идет с трёх лопастным ножом, а 560 с пильным диском, ремни у обоих одинаковые. От себя скажу так, 490 очень мощная, и этой мощности хватает для всех задач, из недостатков тяжёлая, и этот вес вы почувствуете, потому что 9.2 кг это вес без ножа, защити и с пустым баком, если это все добавить то получится около 11 кг, и это делает её тяжело маневренной, при том что мой рост 188 см и вес 95 кг. Мой совет вам, выбирать кусторез по задаче которую вы ставите, но 560 я бы не советовал, разве что для лесных хозяйств, для расчистки леса, потому что это именно кусторез, а косить траву ею тяжело, она чересчур мощная.
My friend I’m a Stihl fan for me the Stihl machines are really amazing I do a perfect job with theme, every one is free to buy whatever brand it’s more suitable for his needs,🙋♂️
@@CsabiTools Yes. It's real. I am a Husqvarna fanatic. For me Husqvarna and Jonsered specially some old models are incredibles. Good luck with your youtube channel!!!
Very nice brushcutter I got a fs 280 well done
Thanks 😊, I have also a Fs 300 my oldest machine 🙋♂️
Sziasztok!
Tökéletes mind a kettő.
Szuper gépek.
Hello, koszi szepen, udvozolek 🙋♂️
Another great video. Your English is getting very good! 👍🏼
Hello Adam, thanks ,greetings 🙋♂️
Impressive. I like them both but it looks like the durocut 44 with the 4 string head cuts the best. I’ve spent hours and hours cutting similar conditions with the FS250. That’s why I’m looking at the big boy model.
Hello yes it’s cutting slightly better than the autocut, the only downside is that we have to change the trimmer line manually, 🙋♂️
No
@@CsabiTools the women 😍😍😍😘
@@bambinopons3505 yes I know my girlfriend.
FS250 is brilliant machine so light so much power. Take the spark arrester out and it will go a little better too and won't carbon up. Take the guard off and get a speedfeed head it will be as faster in these conditions than these 560's with guards still fitted. but remove the guards from these 560's and they will be very fast The only issue with these big machines is they are slow to change directions from left to right as its a lot of weight. In short grass 250 is the faster machine.
Motocoasele astea sunt ale tale sunt super bune
Salutare, da sant motocoasele mele, da sant foarte multumit de ele,🙋♂️
❤😢😢😮😅😊
Paano po kami makaka order sa inyo at magkano po ang fs 561c@@CsabiTools
Dito po kami sa pilipinas
so almost wonderful beautiful video friend i love it so much
Hello my friend, thanks so much for the kind words, I’m glad that you like it,greetings,🙋♂️
@@CsabiTools yes it is my best friend can we talk from insta?
@@jvenema86 yes , text me when you’re available.
@@CsabiTools i have text you
Неимоверно красивая природа в вашей стране! 🏡🌳🏡🌳🏡🌳🏡🏡🌳🏡🌳❤👍👍👍☺🖐
🙋♂️
@@arinakafyan6020 🌸🌻🌸🌻🌸💖👋
Very impressive! The only thing I concerned is about the safety while both of you demonstrating the machine. Mind your distance at least 25m away as if there any flying object might be dangerous. Again dont forget the basic PPE while operating such machine.
Hello, thanks for the advice I totally agree with you, we dare to work so close to each other because I know the terrain and it’s very clean without no debris whatsoever, 🙋♂️
I work with these machines and I know how accidents happen with flying objects. The cameraman has been very brave to stand so close and in front. Never the operator should work so close and never one should use the machine facing another person. Glad nothing has happened.
Agree 100%, more people should know this, im wishing a working face mask, and a triangular brush blade for christmas tomorow :D, Merry christmas btw, and i know from my line trimmer that with only glasses i sometimes get small stones, dirt and grass on my face, im 14, and i bought this used km 131 lately, and almost haven't used it but a litlle, and i won't use it again until i get a face mask :D @@machinesdequalite
Both brush cutters are very fast and have great power
Yes indeed the most powerful machines from Stihl,🙋♂️
@@CsabiTools 👍
the new one is a lot quicker and cleaner cut.
I can see 3 gorgeous machines 😅
Yes indeed 😂😂😂
Stihl is a very good brand. But for this kind of work (meadow mowing), I would rather choose a lighter brushcutter with a smaller engine capacity, due to consumption and also less strenuous work. Alternatively, a different type of mower, not a brushcutter. The 10 kg weight of the brushcutter is crazy if you have to work with it for several hours a day. A good but also powerful brushcutter with high-quality components does not weigh more than 8.5 kg, ideally between 6 and 8 kg. I had a Stihl FS 450, but I sold it because compared to my second brushcutter at home - a 24-year-old Honda UMT 28 D, it had almost double the consumption and was also heavier. Honda mows everything like an STIHL but for less money. I would recommend buying these strongest STIHL brush cutters only to companies that use them every day for several hours (if they don't mind higher fuel consumption), or use them in the forest with a disc intended for that purpose. For regular users and households who mow the grass once every few days or weeks, as I do, while I mow 5 -7 hours a day, there are much better brush cutters, but with a smaller engine capacity (from 28 - to approx. 36 cc), precisely because of consumption and weight. I have had an excellent experience with Honda. Brush cutter maintenance is also important (mainly cleaning the air filter) and even more important is the correct oil ratio, I use red STIHL and especially high-octane E 5 gasoline. Especially in older brush cutters, never refuel or mix E 10 gasoline with a higher ethanol content of up to 10 % (alcohol). It destroys rubber hoses and various seals that were not adapted to it from the factory. I'm just filming and uploading parts of a service tutorial for my Honda brush cutter on TH-cam to my channel. I mix STIHL red oil and high-octane (100) E 5 in a ratio of 1 : 40 and I am very satisfied with the performance, super consumption, and also with the fact that my Honda brush cutter has been working for me motorically without problems for almost 25 years. I just had a problem with one rubber tube when I was refueling with new E10 gasoline for a while, which replaced Natural 95 gasoline at gas stations in Slovakia after 2020. After one rubber tube broke, I'm already refueling with a few cents more expensive, but much better quality gasoline E 5, with which the brushcutter has higher performance, lower consumption, and does not clog the fuel system. If I were to buy a Stihl again, so that I would like to use it every day, I would probably rather buy a smaller, but also professional STIHL FS 311, precisely because of better consumption and lower weight. Greetings from Slovakia.
Hello, thanks for the advice, I agree with you, indeed the big machines are heavy but also when I go to work I can cut a lot more faster with them especially with the brush knife or with the trimmer heads, greetings from Romania,🙋♂️
@@CsabiToolsHello, and btw. thanks for the great video. Good luck :).
Thank you for the review in English.
Your welcome 🙋♂️
Buna ziua dl Csabi! Felicitari! Faina femeie, faina echipa!
Sanatate va doresc si succes!
Buna domnu Cosmin, multumim mult de aprecieri, salutare asemenea iti doresc si tie 🙋♂️
0
U UCI 9
Super brawo na koszacej Pani nawet nieźle jej to koszenie idzie Lab bo Pan to profesja nic dodać nic ująć ja mam kosę sthil FS 260 Nimi marzeniem jest mieć kosę FS 550 super robota 🇲🇨🇲🇨👍👍👒👒Laleczki i pozdrowionka od Rafała z Polski a zaraz się zabieram za oglądanie Pana filmy o pile akumulatorowej👍
Hello, greetings from Romania 🙋♂️
Mucho cuidado que las espigas se convierten en proyectiles a 11000rpm, buen trabajo! 👏🏼👏🏼
Hello, thanks, greetings 🙋♂️
Wunderful girl planter🥰👏👏👏👏 i love sthil 🙋♂️
Hello, thanks so much, greetings 🙋♂️
The new model is stronger than old model👍
Hello, yes it’s slightly stronger 🙋♂️
lol
That's very very strong my friend 💪💪💪💖🇵🇭
Hello, thanks so much my friend, greetings 🙋♂️
Those are two impressive units. Ashame they’re as expensive as they are
Hello, yes indeed they are expensive,🙋♂️
unstoppable. well done. just dont wipper snip ya missus
🙋♂️
He's a professional lawn mower.
Hello, not yet but it’s learning fast,🙋♂️
Excelente video. Pero es importante usar lentes o anteojos para realizar todo tipo de trabajo en estas máquinas. Ya que el golpe de la basura llega a los ojos. Saludos desde Guatemala
Hello, thanks for the advice, I’m glad that you enjoyed the video, greetings 🙋♂️
@@CsabiTools ok
@@CsabiTools q
@@CsabiTools qqwqqqq
Very nice stihl
Thanks, greetings 🙋♂️
I LOVE WORKING STIHL BRUSCHCUTTER!!❤❤
Hello, yes you are right they are amazing machine, greetings 🙋♂️
@@CsabiTools THAT'S TRUE!!
GET LUCKY.
Esssa máquinas são muito ótimas não vejo a hora de comprar a minha 460 da stihl
Hello, yes indeed they are really good machine’s,🙋♂️
This machine don't cut grass, they vaporize it ! ! ! 😂 I own the FS 460 machine and i can say its really the most polyvalent machine from Stihl with very good confort and consumption, i'm sure that with the new stihl harness Xtreem i could cutting grass all day long without effort. 560/561 are really "beast' for forestry and very hard task, nothing my brushcutter can't do, but, less easier !
Hello, I totally agree with you the Fs 460 it’s one of my favorite machine and yes the Fs 560- 561 are real beast, 🙋♂️
Bap2i21h9iaw20kwwjwquq0iwhpm202oejsmkJzjlskzkokkskmamaMmmmllkkllmkm
I have to agree their brother more agile because it’s weight even in cutting 12 inch diameter wood nz
Echo 520 öneririm
Eu trabalhei com o meu 45 minutos mais ou menos depois despejei a gasolina toda e deixei ele ao relantim ate que a gasolina termina e agora ja esta sem trabalhar faz em novembro 2022 um ano.sera que vai acontecer alguma coisa de mal ao motor.falo do stihl 560 em Portugal
Que tipo de hilo es y que cabezal, veo que es de 4 hilos
Hello it’s called Stihl durocut 40-4 trimmer head with 4 mm trimmer line,🙋♂️
@@CsabiTools gracias
Una consulta, en la motoguadaña 560 se puede utilizar la cuchilla de 4 puntas?
Tengo una maleza pesada que no corta la piola
Hello, I’m not sure what blade are you thinking about,🙋♂️
Really good job.
Thank you! Cheers!
What is the cutting width of the fs561 with the nylon cutters
Hello the cutting width is 480 mm in diameter.
@@CsabiTools way too small and way too slow only good if cutting very tough grass or reeds.
Their is a new trimmer head out there it is called auto speed feed trimmer head from Stihl fs56 RC string trimmer I don't know if it fits all the other Stihl weed eaters out there
Hello, unfortunately it doesn’t fit on the bigger model,🙋♂️
Muy bien pareja, que bien lo hacéis, muy coordinados, mejor trabajar en compañía, felicitaciones un saludo
🙋♂️
Semangat master 🇮🇩
🙋♂️
I use a rotor blade Or a disk blade and I clear very thick mini trees. Our machine is 12 years old and the other is a couple of months old and work
🙋♂️
Lucky man!
Best tools and a real woman!
I envie you!
Hello, thanks for the kind words, greetings 🙋♂️
Good review but notice the machines are at maximum revs and basically at low load. This is like driving your car in 1st gear on the highway. You will get there eventually but its slow. With that much power you need to take the guard off and let the string out a lot more. You should be able to cut a 600mm swath maybe more depends on how the string behaves. I go until it starts to wrap around the head and then i know I've gone 1 bump too many. I cut farm hills for up to 8 hours at a time. I don't have time to be cutting with those silly push in strings. They wear down and then you are only cutting 400mm then you have to stop and put new ones in again. I carry heaps of extra line and a speed feed head. Keep bumping it and maintaining huge cutting path.
Hello, thanks for the advice , I agree with you the machine indeed it’s at maximum revs, me personally I like to cut the grass always with the deflector on ,now for this big machine like in the video I have a new guard with a bigger cutting diameter ( 480 mm ) , if the grass it’s big and thick even with this big machine it will be a struggle to cut without guard and like you said 600 mm I think it’s too much in big and thick grass, smaller grass I think it can handle it, greetings,🙋♂️
Você tem uma roçadeira Stihl FS 300 ??
🙋♂️
Gostava de ver uma demonstração de corte em silvas e giestas, este tipo de trabalho qualquer máquina de potência média faz.
Hello, check out my channel, I have multiple videos with different machines, ,🙋♂️
@@CsabiTools iq
nice video my friends
Thanks, greetings 🙋♂️
Super magnifique boulot
Merci beaucoup,🙋♂️
Derien moi je taf en espace vert aussi
sold, nice demo
Thanks 😊
What a powerful couple especially your girlfriend.
Hello, thanks for the kind words,🙋♂️
Good job ❤❤❤ nice grass kat. KAMAWER VLOG TV
Thank you! 🤗
I tried Stihl trimmer line. To me it's no good. I'm back with Oregon line now.
Ok , good luck with your trimmer line, greetings 🙋♂️
BESIDE the place to hang the machine wats the difference between the two?
Hello here yo can find all the details th-cam.com/video/8BaIu_9vWEA/w-d-xo.html
Hallo csabi from greece,can you see difference in consumption of gasoline between fs561and fs 490?to the same area ,time to clear?
Hello with a full tank we work approximately the same amount of time, but the tank of Fs 561 it’s slightly bigger so the consumption it’s slightly higher,🙋♂️
@@CsabiTools Hi
Szia Csabi ! Nagyon jónak tűnik a 40/4 damilfej ! Az idén már nem, de jövőre beszerzek egyet ! Köszi a videót👍
Szia Andras, igazad mongyam engem is meglepet nagyon jol ment à 40-4 damilfej, szivesen udvozolek 🙋♂️
@@CsabiTools Köszönöm 👍
Good job 👌
Thanks 😊
Good video
Hello, thanks greetings 🙋♂️
Good bro ❤️🤝 from Indonesia 🤝
Thanks 😊, greetings
@@CsabiTools bridge cutter
Bhi
Bravo boss ! Subscribed !
Salutare, multumesc,🙋♂️
क्या यह भारत में भी उपलब्ध है किसी डीलर के पास कृपया बताएं
🙋♂️
Excelente que las mujeres aprendamos atrabajar con estas maquinas en el campo.
Hello, thanks greetings 🙋♂️
Ojalá algún día yo pudiera tener una maquinita como la que tienen ustedes ahí para ser bella esas como las que ustedes hacen
🙋♂️
Salve bei mezzi forever stihl la ragazza a l'inizio lasciava l'erba 🤣🤣🤣 bel lavoro 🙋♂️❤💯😎🇮🇹
Hello, thanks for the kind words, greetings 🙋♂️
@@CsabiTools
Cual de esas máquinas es mejor, la 560 o la 561, cuál es la diferencia entre una y otra?
Both machines they have the same power and weight, the Fs 561 it’s the new version, the Fs 560 they stopped manufacturing,🙋♂️
Gracias @@CsabiTools
I have an FS410 and the strimmer cord melts if I run at full revs for too long! Do I need to use better quality cord perhaps?
Honestly to be , i never occurred that problem, you can try using different cord, if not try to take the machine in to a service,🙋♂️
в сервисе скажут леску поменять😂
Eu tenho uma rossadeira FS80 essas rossadeiras são ótimas pra serviço pesado!
Hello,🙋♂️
Hello csabi,the new model fs561 is more stronger or less stronger than old model FS560? Or same Power? Thanks
Hello normally they have the same weight and power, but the new one Fs 561 I find it slightly faster ,🙋♂️
@@CsabiTools ok thanks csabi
Where is this place?
Hello, we are living in Romania,🙋♂️
O right
Bravo, Csabi & Ozana!
Great Artists
Hello , thanks, greetings 🙋♂️
Hi Csabi, I have fs560 and autocut 56-2 with that same nylon, but 3mm. When using full throttle within a few minutes, the surface of this nylon is PARTIALLY melted, ie baked (when using a 2mm nylon that comes with the head when purchased, then it is melted along its ENTIRE length).
This is manifested in the fact that when I hit the ground with the cutting head, the nylon does not come out, and does not come out because it is melted. When I squeeze the gas and release it immediately and so on throughout the cutting, then it can last a longer time.
When I cut wet grass, it can be seen that the moisture on the head evaporates due to the heat.
What would be the advice, ie does this type of lubrication have a system error, because now, as I see fs561, it is exactly the same, it only has an added screw for lubricating the head, or is only my cutter defective or is it something else?
Hello, you are not the first person who tell me about this problem, honestly to be I don’t know why it’s melting the trimmer line, when it was the last time that you added grease into the gearbox of the brushcutter, I guess that it doesn’t have enough grease and that why it’s overheating, with my brushcutters I never occurred this problem. My opinion that you should take it into a service to check it out and add some grease, in the new model the Fs 561 after every 25 hours of work we have to ad 7-5 g grease into the gearbox. Greetings hope you will fix your brushcutter 🙋♂️
I have the same setup and find the 3.3mm square line works really well.
DjsyeusueuhhduQ
000p
jjhf
I'm glad I'm not the only person having this problem... your post is a couple of years old.. did you find a solution? I think I'm going to try the fix length line either the Stihl Durocut or the Oregon Jet-fit...
Tohle mě hodně moc baví, ať se daří.
Thanks so much, greetings,🙋♂️
I'm from Nepal. How to get it ? can you deliver it to Nepal ?
Hello, I’m not a Stihl distributor, you have to search it online in a store that delivers it to you,🙋♂️
What type of rope using
Hello, Stihl CF3-pro 3,3 mm trimmer line and 4 mm trimmer line,🙋♂️
Szia!
Megéri beruházni az Fs 560/561-re esetleg?
Nekem egy fs 460 van, elég gyakran használom, bozótvágástól megkezdve nagyobb területek kaszálásáig.
Az 560-sok nem túl nehezek már? Erőben annyival meggyőzőbb?
Hello az igazsag hogy sokal erosebb es nehezeb egy Fs 560/561 , ha sokat fogsz vele dolgozni megeri mert sokal erosebb es nagyob keseket rakhatsz a gepre es hamarab fejezed be a melot…….. ezt te magadnak kel eldonteni ha megeri, 🙋♂️
Почему без очков?
🙋♂️
Can that heard work on my Stihl FS 260
Hello, sorry it’s too big for the Fs 260 ,🙋♂️
Máy đẹp và khỏe quá giá như nào ạ
🙋♂️
Szia Csabi,
Roxananak hiányzik a fül védője!
Hello igen tudom, mikor a videot filmezuk nem soktuk hasznalni mert csak max 10-15 percig dolgozunk, udvozolek 🙋♂️
Thumps up 👍👍
Thanks, greetings 🙋♂️
Nice Stihl
Thanks 😊
Amigo donde puedo comprar un carburador para desbrozadora fs 560 Sthil
Hello , I think only in a Stihl store you can find parts,🙋♂️
What is the price ?
Approximately 1600-1800 €.
Nice how much
Thanks, approximately 1600 €
Приветствую 🖐️
Ребят подскажите пожалуйста stihl fs490 чем уступает этим косам?
Мощности ,мне уже ответили ,что 490й очень хороший агрегат ))).
У 561 прошивка m-tronik новая более продвинутая ,редуктор так же обслуживаемый ,руль прямой ,но с рулём как у 490й шагать проще ))).
🙋♂️
Здравствуйте, я сам лично имею Stihl FS490 C-EM, а FS560 C-EM только держал в руках, но не работал ею. В 490 рабочий объём 51,6 см куб в 560 57,1, мощность 3,3 к.с. против 3.8, вес 9,3 кг против 10,2 кг. У обоих мотор 2-Mix с технологией M-Tronic, баки по 0,99 л, диаметр покоса 480 см. Длина штанги у 560 176 см, а в 490 180 см, но в 560 штанга и редуктор толще. Комплектации отличается в зависимости от того где покупаете, в основном 490 идет с трёх лопастным ножом, а 560 с пильным диском, ремни у обоих одинаковые. От себя скажу так, 490 очень мощная, и этой мощности хватает для всех задач, из недостатков тяжёлая, и этот вес вы почувствуете, потому что 9.2 кг это вес без ножа, защити и с пустым баком, если это все добавить то получится около 11 кг, и это делает её тяжело маневренной, при том что мой рост 188 см и вес 95 кг. Мой совет вам, выбирать кусторез по задаче которую вы ставите, но 560 я бы не советовал, разве что для лесных хозяйств, для расчистки леса, потому что это именно кусторез, а косить траву ею тяжело, она чересчур мощная.
@@EvgenPokos привет благодарю за информацию
Не мог бы сделать фото 490 го в длину рулеткой?
Top me manda uma para o Brasil aqui não tem essas duas 😮😮😮
Recently I bought a sthl fs 120 😊
Good luck with your purchase, greetings 🙋♂️
Can i get this brush cutter in india
Hello, sorry but I don’t know my friend, try to search it in a local store or online store ,🙋♂️
Ước muốn có 1 chiếc như bạn
Salut.
acel turometru de unde lai cumparat si dack se poate monta pe orice motocoasa ?
Salut, te referi la capul cu fir durocut 40-4 ?
assisti o seus videos antes de comprar ,,ob rigid ja la vai uns 9 meses
🙋♂️
Девушка просто шикарная!
Thanks so much,🙋♂️
👍🏻👍🏻👍🏻
🙋♂️
good job
Thanks 😊
How much sir
You have a job here, I am looking for a job in a foreign country
Hello, sorry my friend I don’t have work here,🙋♂️
I want to buy a Fs 510 that’s the biggest it gets in my country and that’s a very powerful waka
Hello yes also in my country is the biggest machine , I own the Fs 511 and it’s an amazing machine,🙋♂️
@@CsabiToolshow did you get the Fs 560 and Fs 561 did you bought it online??
@@judemcgarrell8910 i bought them from Germany both machines,🙋♂️
Welcome my country
Nice frend
Thanks 🙋♂️
Så jäkla bra
🙋♂️
Salut! Ce AutoCut sa pun pe un Stihl FS 550 din 2000
Salutare, banuiesc ca in autocut 56-2 dar nu pot sa iti zic cu siguranta, pentru ca nu am lucrat cu acel model,🙋♂️
@@CsabiTools Mulțumesc
Привет всем 🇷🇺 👍 👍💯
🙋♂️
De unde le cumperi și ce pret are 561
Salut, Fs 561 din Germania , si a costat 1600 € , 🙋♂️
Muy chulo el video,pero falta seguridad,,visera,gafas,manguitos para antebrazos,espinilleras,cascos para los oidos,,etc,,por lo demas muy bien😂🤣👍
🙋♂️
Para ese monte casi seco lo mejor es la cuchilla y es mejor un protector de malla para la cara que ese protector que estorba en la parte de abajo
Hello, thanks for the advice, greetings 🙋♂️
Super
Thanks 😊
Mesin yang sangat menarik dan membantu
🙋♂️
Husqvarna has got better brushcutters. Husqvarna and Jonsered are always the top machines!!!
My friend I’m a Stihl fan for me the Stihl machines are really amazing I do a perfect job with theme, every one is free to buy whatever brand it’s more suitable for his needs,🙋♂️
@@CsabiTools Yes. It's real. I am a Husqvarna fanatic. For me Husqvarna and Jonsered specially some old models are incredibles. Good luck with your youtube channel!!!
@@carancos thanks, good job with your tools,🙋♂️