How to Install Magic Peel & Stick Caulk
ฝัง
- เผยแพร่เมื่อ 22 มี.ค. 2018
- Magic Tape Caulk is designed to provide a flush seal without the usual mess of caulking.
Find where to buy: magicamerican.com/shop-catego...
Magic Peel & Strip Caulk is an easy, cleaner alternative to traditional caulk. It comes in Tub and Wall (wide and narrow) and Tub and Floor versions.
Directions: For proper adhesion, please follow the instructions carefully. Utilize proper protective equipment when completing this project. Review all cautionary information on each manufacturer label for guidance.
Surface Preparation: Preparing the surface is critical to successful adhesion of Magic Peel & Stick Caulk.
1. Remove all existing caulk. Paint thinner or mineral spirits can be used to soften caulk prior to removal.
2. Thoroughly clean the surface with scouring powder to remove all residue, and then rinse with water.
3. Wipe previously caulked areas with rubbing alcohol. 4. Dry all surfaces thoroughly.
Caulk Strip Preparation:
1. Measure the side of the tub where you would like to apply the caulk and cut the strip of caulk to length.
2. Pre-bend strip of caulk by folding it at the score line that runs down the middle to form a 90° angle.
Application:
1. Without removing caulk backing, place one end of the pre-bent strip in the corner where the tub and floor meet. Take care to keep caulk from getting wet during application.
2. Starting in the corner, peel a small section of the backing from the top half of the strip. Press top half of strip firmly to the tub. Work carefully to avoid having to reposition the strip once adhered.
3. Working in small sections at a time, continue to slowly pull off the backing and press the strip firmly to the tub until the entire top half of the strip adheres.
4. Repeat process for bottom half of strip. Press bottom half of strip firmly against the floor to complete the installation.
5. Prevent water contact with caulk for a minimum of 12 hours after installation. - แนวปฏิบัติและการใช้ชีวิต
Cool.
I have grout lines on my floor and this strip doesn't adhere to those dips. Considering adding silicone under it, just wondering if that will work?
We would need more information in order to better assist you. You can contact us at #855-364-8137 or via email at consumerrelations@magicamerican.com
I want to use this tape for the area where the tub meets the floor. Our tub has four gentle curves about a quarter of the way from each side. Will the tape adhere properly to the curved areas without cutting it? Or would I have to cut it anyway?
We would suggest using the Magic Tub & Floor Peel and Stick Caulk for this purpose. The product allows you to bend it in the curves. Best results are achieved when directions are followed as per the label.
This doesn't stay on, the glue on the back isn't waterproof 👎
We appreciate your feedback, we will pass it along to our Production team.
HELLO PS EXCUSE CAPSIMPARTIALLY BLIND WHICH IS MAKING THIS SIPLE JOB VERY HARD. WE TRIED THIS TAPE AROOUND THE LOO BASE BUT IT DOESNT GO ROUND SMOOTLY. PLEASE DO WE NEED TO CUT TO MAKE IT GO AROUND? WE BEEN AT THIS FOR HOURS. IF YOU CAN HELP I THAQK YOU JACK
Please contact us at #855-364-8137 and we would be happy to assist you.
This was absolutely a WASTE OF MONEY!!! It is definitely not water proof and started peeling of the next day after I installed it after I took a shower!!!
We are sorry to hear that you are having issues with our product. You can contact us directly at #855-364-8137 so that we can further assist you.
Doesn't work on toilets to hard to come around it buckles.
We are sorry to hear of your disappointment in our product. We would be happy to discuss this with you in greater detail. Please contact us at #855-364-8137.
Almost fell asleep watching this.