Flashing LED Circuit using 555 timer on Breadboard! 💡
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- ( Circuit Diagramm at the end of the video)
In this Video i created a flashing LED circuit with 555 Timer IC on breadbord
I decided to change the rate at which the LED flashes by adding another capacitor to the circuit so that the LED flashes much longer
Components you need:
1x breadbord
1x 555 Timer IC
1x LED
1x 1 micro Farad Capacitor
1x 470k resistor
1x 100k resistor
1x 220 resistor
1x 9V Battery
2x jumper wires
Let me know if you enjoyed the Video by subscribing my channel 😇
#breadboard #circuit #555timer #555circuit #flasherled #ledflashercircuit #circuit
More Videos:
Fire Alarm Circuit 👇
th-cam.com/video/jc5K2RMGQY0/w-d-xo.html
RC Low pass Filter 👇
th-cam.com/video/JXGlq6THyWU/w-d-xo.html
LED Flasher Circuit 👇
th-cam.com/video/Zu1TZ-9C33U/w-d-xo.html
Doorbell Circuit 👇
th-cam.com/video/XZ2f612WOTU/w-d-xo.html
Half wave Rectifier 👇
th-cam.com/video/SHu47wmiY7I/w-d-xo.html
Charging/Discharging Capacitor 👇
th-cam.com/video/HUgAc91mMe4/w-d-xo.html
There is a simpler way , one resistor less than in your schematics . Just connect the timing capacitor ( legs 2&6 point ) to the leg #3 via one resistor which value will affect the frequency as well . Connect the LED between leg #7 and (+) rail, via current limiting resistor . That is all . 2 resistors , 555timer and one capacitor. The duty cycle will be close around 50% .
Useful information👍🏻
what type of component is rload
Resistor
circuit diagramm ?
You can find it at the end of the Video