Here's Why You Need A Humidity Control Cabinet For Your Camera Gear

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ม.ค. 2022
  • I have wanted to do a video into the Sirui humidity control cabinet for a while, as I have found it useful for keeping my gear stored correctly and keeps it running smoothly. This is made by Sirui which its model name for this one i use is the HC110.
    ---------------------------------------------------------------------------------------------------
    If you're looking to buy, sell or trade any camera gear be sure to check out MPB. I have been using them since 2014 and they do a fabulous job, allowing old gear to be kept in circulation, it will also save you thousands! I have purchased a range of Canon and Hasselblad gear from them. Be sure to check out their vast range using this link prf.hn/l/20x4GWV
    ---------------------------------------------------------
    To help support this channel using these links down below that are affiliated which enables me to keep doing what I do and funds what i love to do here
    Sirui camera gear sirui-photo.com.au/ref/Phillips/
    If you're looking to buy, sell or trade any camera gear be sure to check out MPB prf.hn/l/xEgXXYz
    Before you head out on your next adventure be sure to head over to ontrackmeals.com.au and use the code PHILLIPS on checkout for up to 10% off your order. They produce some really nice food which is a nice treat when you’re miles from your nice cosy home.
    On Track Meals also run expeditions around the world so be sure to check that out as well at www.ontrackexpeditions.net
    You can also find me on instagram at to see extra content and more of what I do / simonphillipsphoto

ความคิดเห็น • 18

  • @VisitFlix
    @VisitFlix ปีที่แล้ว

    Very informative. Thank you

  • @lisap5615
    @lisap5615 5 หลายเดือนก่อน

    Thanks, Simon. This was helpful. I don't have a lot of camera gear, but I want to take good care of it. I live in a cool, humid environment so this would probably work well for me, though I would be getting the smaller size.

    • @SimonPhillipsPhoto
      @SimonPhillipsPhoto  5 หลายเดือนก่อน +1

      I am glad to hear you have found this useful! it is such a nice edition to help keep the gear protected and also to dry out your gear after a shoot in wet or humid conditions. Don't forget to set the humidity percentage to 45 this is what mine is set to. If it is too high it will damage the seals on the camera gear and components and too low it will do nothing.
      I'd recommend going for the next size up to what you think you need, just in case later on you get more gear and you need more storage room. Mine today has far more gear inside of it with 5 cameras and 13 lenses, 2 drones and video gear.
      All the best and enjoy your photography journey! :)

  • @MikeBanom
    @MikeBanom ปีที่แล้ว

    Thanks for this video! Would you say this is a good solution for security, or strictly on temp / humidity controlled storage?

    • @SimonPhillipsPhoto
      @SimonPhillipsPhoto  ปีที่แล้ว

      No problems at all! I am glad I can help. In all honesty even though it comes with a really good lock the glass is quite thin and easy to break I suspect. I am only using mine for temp and humidity control, it is working a absolute treat though I'm starting to run out of room in mine now. Best to go for the next size up than what you think you need.

    • @MikeBanom
      @MikeBanom ปีที่แล้ว

      @@SimonPhillipsPhoto Thanks so much Simon! Makes sense, thanks for the incite.

  • @andreytamelo1183
    @andreytamelo1183 ปีที่แล้ว

    Hi Simon,
    Thanks for the video. I just bought hc-50 version and I have a question: does the green led light blink all the time on your cabinet? I'm asking b/c on mine the whole display (the green led included) turns off after ~30sec and you can't really tell if the cabinet is even on.. It turns on again only when I press any of the control buttons.

    • @SimonPhillipsPhoto
      @SimonPhillipsPhoto  ปีที่แล้ว +1

      No problems at all! With mine I just had a look and all the lights are off including the display, it basically just dims completely, but if you get a light onto the display you’ll see the humidity and temperature readout. It’s certainly on all the time, I think it use’s very little power and it doesn’t always need to be running since the cabinet is completely sealed. I have only found the lights to come back on when I open it up and when it needs to control the levels inside the cabinet.

    • @andreytamelo1183
      @andreytamelo1183 ปีที่แล้ว

      @SimonPhillipsPhoto The display on mine goes completely off after ~30secs and no readout is visible until I press a button. Which I find very annoying. The reason I asked is that in the video I noticed that your cabinet's display kept blinking with green (the leftmost led light).

    • @SimonPhillipsPhoto
      @SimonPhillipsPhoto  ปีที่แล้ว +1

      Maybe there’s a slight difference on the time out due to my case being larger more than double the size of yours. I can guarantee the unit is still working even when you can’t see the display lighting up.

  • @MUFFTRIX
    @MUFFTRIX 2 ปีที่แล้ว

    Are the shelves completely removable for larger lenses etc

    • @SimonPhillipsPhoto
      @SimonPhillipsPhoto  2 ปีที่แล้ว +1

      They sure are or you can remove them completely.

  • @angelathomas2117
    @angelathomas2117 ปีที่แล้ว

    Hi does it come with the foam please I am looking at buying one please

    • @SimonPhillipsPhoto
      @SimonPhillipsPhoto  ปีที่แล้ว

      Yes it does. Best to buy the next size up to what you think so you have plenty of room, I now have more stuff in it today.

  • @yaj855
    @yaj855 9 วันที่ผ่านมา

    Elle est bien ou pas monsieur ??

    • @SimonPhillipsPhoto
      @SimonPhillipsPhoto  9 วันที่ผ่านมา +1

      It certainly is a great unit and still going strong today, I’m using it for all my cameras and lenses.

    • @yaj855
      @yaj855 8 วันที่ผ่านมา

      @@SimonPhillipsPhoto thank you