Budget Brushed 1080g2/555 System by Hobbywing is AWESOME
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2024
- This is the budget HW $62.99 System at AMain bit.ly/3PtQAwD
Flysky GT5
Amazon amzn.to/3z5VAOV
Radiolink RC8x
Amazon amzn.to/3OvEbqe
Amain Hobbies bit.ly/2RsdBVl
Horizon Hobby
Tower Hobbies bit.ly/3o7twsR
Escape CamperVan bit.ly/3Jck8dl
BeardBrand (BeardStuff) bit.ly/3xD6af8
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Get Upside to save on your gas! I let it build up till christmas and cash out a few hundred $$$ each time. Click this link to get a $5 bonus the first time you make a purchase. upside.app.link/9H6W8 - บันเทิง
Seems to work ok. Good price as well for less than $70 bucks 👍👍😁😎✌️
very nice truck, looks great, nice job building it,
I just got my trx4 blazer like a month ago I put my redcat gen8 tire on it right out of the box does amazing with them
I just installed a Hobbywing 555 13t 5 slot brushed motor in my Vanquish Phoenix. Fits perfectly no cutting, no grinding fit. Drops right in 👍
Been wanting to see a review of this motor for some time, thanks! I do like the feel a of a brushed motor. I like my Fusion Pro, but love going back to my 1080 with Holmes brushed motor.
I tried class 1 tires on my TRX4 also, really lowered the CG, but looked a bit wrong.
Have you tried adjusting the drag brake and turning off FOC? I really like my SE without FOC.
Nice review…4.65 tires fit perfect under the bronco….
The bronco did really well for the small tires! I’ve got 2 of these broncos and have built them differently for comparison purposes ….very good rigs
I think stock size is the perfect scale look, 4.75, but I’ve seen ruptures on a bronco that somehow don’t rub.. even with the stock fenders and shocks… I saw this on hello RCs channel. I bet they’d increase performance quite a bit
Up until about a week ago or so i was running 1080's and Holmes Hobbies motors in both my crawlers but now i fitted them with Fusions, that's a hole different ball game. Interesting test though, seems yo work well that system
Hard to pass by the fusion SE to save a few bucks on this system but i guess some folks are really anti-brushless.
Yes mine just put in 1080 g2 work the best no need change motor and servo
make the video with a HB r1001.
I cant see y anyone would wanna stay brushed with the amazingly better system going brushless. Mean for the money the fusion is just to cheap to not go brushless. And the brushless motor dont wear out if taken care of at all. It will pay for itself in the long run. And preform better in almost every aspect.
I've had some people tell me because they are sick of seeing over powered rigs and like to actually struggle a bit I get it but I love brushless
TRX4s and Basecamps make excellent class 1 rigs. Very capable even on the small tires.
I like what Hobbywing is trying to do but unless you’re really pinching pennies, hard to justify NOT getting the fusion se.
The thing that pisses me off as of late when it comes to RC, is the 2 in one ESC bullshit. I want to put a fusion pro in my SCX10 Gladiator, but it's a damn 2 in one ESC so I'd have to buy another receiver that works with my radio.
@@JD-tl7ldthat’s weird? I swear I’ve seen people just drop a 2 in 1 into a stock setup….kinda sucks! I’d just go with this kinda brushed setup… literally no difference…maybe 5% more torque for 2-3x the price
I'm kind of new to the whole RC thing as I've only been in a year, so I am used to the conventional ESC+radio+receiver. Both my FMS Atlas and SCX10 Deadbolt are conventional set ups. I can drop a 2 in 1 brushless motor in either and it would work. My SCX Gladiator on the other hand is a 2 in 1 ESC+receiver. I cannot drop a brushless 2 in 1 in it without getting a new receiver. That's what irritates me greatly. A cheap Spectrum receiver is like 50 extra bucks on top of an already expensive truck and a brushless set up.
@@JD-tl7ld I’d honestly tell you to get a Flysky GT5 or something similar. They’re about $70 and the receivers are as low as $15 and it’ll hold 20 vehicles. They’re awesome.
@@Ginga_Ninja_RC That's one I'm considering. I do want to add a two speed servo and maybe a winch as well. The more channels, the better.
I run Tekin RX8 esc and the Hobby Star 1/8 1450kv 4268 motor and running two HRB 3s 6000mah 50c in parallel in my 14 year old scx10 jeep jk
In my knowledge TRX4 has lowest gear ratio out of the box, i think it's about 60:1 ratio on low gear. And in crawler i am brushed guy
The new v2 products are awesome! I just recently got the new v2 8bl150 esc and 4274 2000kv motor combo for 125 to the door👍🏻 nice rig😎tires do look a little small though 😊
That truck can handle 8S. Givr
Have you done a review for HB r1001??
I heard about the knock off version of the bronco.😅
Should dona video on your tune settings for esc
Ive seen alot of videos on this motor. I like to creek crawl and things of that nature. Would it survive in water?
1080 and a 540 motor combo is under 60 at Amain right now.
I need to get that combo for my wltoys car so I can run a 550 motor without it shutting off during hard terrain runs.
That drag brake even in 1st gear just doesn’t seem very good. But I’m about to order one of these for an old OG scx10 half cab that has a tekin crawler setup that needs rebuilding.
All the drag brake can do is “short” out the motor leads. That’s all it can do by itself
@@ExocagedRC I liked the wheel speed. Bit better than the 1900kv se?
It is possible with TRX4M?
I have been looking at these, the 555 available in 11t and 13t, the 540 is available in 40t, 30t, what is the difference between the number's .is it smaller the number , more torque or is it the bigger the number ,more torque? I'm looking for a good crawler motor for my Axial Capra UBT18 and not interested in speed
is it support 4s lipo
With the SE being so cheap, I think this is overpriced. Assuming the motor costs $20, the ESC should be about $45. If I burned up either I’d still upgrade the whole thing to an SE.
👍😁😊
My LHS stocks these esc/motor combos. Said 99% of buyers are very happy with them.
(Fact of my LHS owner. HE legally owned that shop when he turned 21. Parents bought it for him. He went from a train only shop, to a multi-million dollar a yr business in 10 yrs. EVERY year, a hobbytown executive stops in wanting to buy it. Said he'll NOT EVER sell to them.👍)
First hahha
🤷♂️ u sure?🤪
#1👍
@@old-rcplane-phart 🤣🤣 yup I finally beat you for once 🤣 weird there was no comments but 14 likes 🤷🏻♂️
Just save up and buy the fusion guys
At that price point I would rather spend tiny bit more and buy Fusion SE 1800kv.
I agree. I like my SE much more than brushed. It might be the same cost by now. I don’t even use FOC.
I’m surprised you wasted money on the bowhouse battery tray…. I completely remove my stock battery tray and use shorty packs up front. MASSIVE difference and I still get over an hour of runtime per pack