✨ Gas Stove Keeps Clicking - Fast - Easy FIX ✨
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- ✨ Gas Stove Keeps Clicking - Fast - Easy FIX ✨
Simple Fast Way to get your stove to stop clicking by improving gas flow to the burner. Just takes a few minutes. All you need is a paperclip like MacGyver.
Click here to order wire brushes to clean burner head: amzn.to/3NoYbZw
Click here to order tool to clean gas burner oriface: amzn.to/3LCYsGU
Click here to order electrical spray cleaner: amzn.to/3NlaZQK
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-TH-cam Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
This helped put my grandmother at ease right before Christmas. Thank you :)
I love that😊😊😊
I had to clean my burner heads and let it sit for 48 hours to fully dry out. Started it back up and it works like a charm...
Awesome job😊
THANK YOU!!! just cleaned my spark thing (with a toothbrush bc I didn't have a wire brush) and fixed it!! 2 minutes
You are the Master😊😊😊
Thank you so much for sharing. I love when people pass this kind of info down . Appreciate it!!!
You’re very welcome 😊👍
Trying this later when I get home. From all the comments I already know it will worn and fix my problem. Thank you.
Please let us know how it goes👍
Thanks so much for ur so helping video, I was about to buy a new stove 👍🙏🤗
Thanks so much Hilda❤️👍😊
Thanks
No problem
White vinegar, tooth picks work fine. If you have any of those teeth cleaning Christmas Trees I call them they will fit perfectly in the holes and a twist usually cleans out the holes.
Ive heard tooth picks are a bad idea. Use a metal pin or metal wire
@@fernandog7791 If you break off the toothpick tip in the hole you are kind of screwed at that point...
Thank you! That helped :)
Thank you😊👍
It's not always the obvious... My 2 year old Stoves gas hob started clicking incessantly. Like you and countless others, I assumed it was an igniter or gas supply fault. I spent an hour or two faffing about with cotton buds, Isoclean (Isopropanol cleaning fluid), kitchen roll, hairdryer, etc., but all to no avail. Stoves, the manufacturer, said they could send an engineer to fix the fault for £140. Being really mean (!!!) I scoured the Web and came across another possible cause. I removed the actual control knobs to inspect them and immediately spotted one with a 3mm glob of greasy gunge, presumably accumulated gradually during regular cleaning. 10 seconds later, after a scrape with a pointy thing… SORTED. Incidentally, I have no idea why this could have been responsible.
How did you you get the knobs off? Just pull it off?
@@janeatyeo7387 I don't recall it being difficult. I just pulled them vertically upwards. Try spraying some WD40 about the knobs, then leave for 20 minutes to soften. Even better perhaps, you could try waving a hair dryer around (but be careful).
thank you soo much! your actual comment helped ❤
Center jet was the problem for me. On a propane model, the hole in the jet is tiny....I used a sewing needle to ream it clean.
Nice job Ed
if my gas water got shut off in the basement. is my gas cooking stove upstairs suppose to be shut off also from upstairs???cuz i heard some click sound from my stove, while stove not being used. I opened the oven and the oven pilot is off. my stove top range, electronic ignite top works.. I'm not sure what about gas oven w o pilot lit? does that pilot go out automatic when they shut off the gas hot water in basement??thank you😊
my new kitchen aid kcgc506jss keeps clicking after turning on gas. Some burners only click when the gas is turned low. FYI We don't use natural gas, we use LP Gas instead, so we had to convert it. Any idea what the issue might be?
When I have one burner lit, the non-active burners will click intermittently. Any ideas?
Great question Susan,
Whenever you turn on one burner all the burners actually will click.
The burner that you lit thinks that the flame is not present so it continues to try to light by clicking.
Can you try and get the burner cap for that one burner to be nice and centered.
If the burner cap is not in the correct position The flame will not bathe the igniter and the stove will think that the burner is not lit.
@@ScottTheFixItGuyChannel thank you!! That solves it!
Does the gas need to be turned off?
Hi Alex,
You can leave the gas on👍😊
Mine is clicking before I start the fire. When fire starts clicking remains
One of your burners probably got wet.
You can use a blow dryer to try and dry it out.
@@ScottTheFixItGuyChannel thanks will try that
Thanks for your videos, I love them! :)
Thank you for the information about cleaning a burner. What about a "Broop" sound every once in a while when the gas oven is on?
Mines just started randomly clicking 🤷🏻♀️.. l wasn't even using the cooker.. Its not lit its just sparking every 9 seconds.. Doesn't look dirt
Hi Jane it might have gotten a little wet.
My problem is with big pans, not enough air gets to the flame, so the sensor starts clicking. Rigged it so the cooking grate is 2" higher, problem solved.
Good idea👍
Excellent video! Informative, well shot, and well presented. Kudos and thank you!
You sound like Owen Hubt from greys anatomy lol
This is Owen😂😂😂
Stove in apartment stop clicking
Mine's looks so different than this one
gas cooktop kitchenaid kcgs550ess the middle burner does mot light
Might be a clogged gas jet
Question. I just tried this but the dog barked while I was doing it and it scared me and I dropped the paper clip into the hole 😂 I can’t even see it in there! Can I leave it down there or do I need to take the stove apart to get it out?
You can leave it. The gas pressure might push it back out.
funny thing is i have the same stove
I hope you can fix it🤞
You saved me hours and hundreds of dollars. $0 fix!
Awesome, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: th-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
This video doesn't answer the question. Not good at all