i just purchased this set im a fridgy i work in alot of different places and i get sick of breaking out the big oxy acetylene rig for a few welds and welds in awkward places which alot of those are! it took me an hour playing around with the set but i have successfully brazed 7/8 pipe no worries and i have done probably 20-25 welds on pipes from 3/8 to 7/8 and going of the regulator it is now at 50 bar(full is 110) so just over half its great! i use the 2 middle size nozzles most and tried the biggest one its overkill for most things i intend to use this kit for and i work on commercial equipment. Bottom line is at the start i was skeptical of its performance but once playing with it i have learned i like a higher fuel reg setting than whats in the book and i like the flame to be noisey(plenty of heat) i would recommend this set fo anybody in my trade as a 2nd set, this set does not replace a proper oxy acetylene rig but its a shitload better than mapp gas alone! and its a welcome addition to my box!
Samuel Rule awesome mate. I'm a fridgy also. I was thinking of getting something in between my map torch and my regular oxy kit. And I'm sold on this after hearing what you had to say. Thanks bud
As a retired. Frigman its the one great piece of kit that I still own,climbing ladders onto roofs its lightweight and ease of carrying plus brazing capability is fantastic,still use it now in my man cave for building those useless projects that I now have time to bodge and bend,because I can.
I finally managed to get my hands on one. Very well made kit, robust, with loads of accessories. I will be doint refrigerationbrazing. Should last an entire career of cared for properly. Only downside for me will be the cost of the oxygen bottle/cylinder. Here in the UK its around £25+ on its own.
I`ve got one of these for work and it`s pretty good - Only bad thing is the Oxygen bottles don`t last very long and are expensive to replace - Is it possible get or rig up a bigger refillable Oxy bottle to one?
Mark Opie Mark, these sets are not designed to be used with any other oxygen bottles other than the genuine disposable cylinders. To extend the life of the oxygen cylinder, try using the smallest sized tip needed for each job or application. Also make sure that the fuel gas pressure is set correctly, as this could cause increased consumption of oxygen.
+andiellio The kit is designed for welding and brazing applications. The disposable cylinders have limited capacity to ensure that the kit remains portable with regards to size and weight. Cutting with the unit (although possible) in unviable due to the larger consumption of gas for the cutting process.
Its probably worth noting for anyone not in tune with hot works that you can only 'weld' steel in the true sense of the word with Oxy Ace, you can braze with propane/mapp gas and oxy but any weld would be brittle due to hydrogen embrittlement even if it looks ok. I wish you could buy a set with larger cylinders (5 litres water capacity) that could be refilled from a large Propane/Oxy bottle but I'm pretty sure you cant refill an oxy cylinder at home due to the risk of the combustion risk if contamination is present in the lines. the long and short of everyone I know who has one of these jits is that the bottle are hideously expensive, last a very short amount of time and the kit usually ends up sat in a corner unused. You would be better of with a rent-free 4kg propane and a 10kg oxy on a little trolley. cheaper in the long run and not untransportable.
This turbo tool kit is not available in my country how much this welding set & what's procedure of purchasing by online or other options thank you very much for new information 😁😁
BUENAS TARDES ME INTERESA EL EQUIPO DE SUELDA POR FABOR DIGAME DONDE LO PUEDO COMPRAR DESDE ECUADOR O ME HACEN EL ENVIO ME PODRIAN AYUDAR CON ALGUNA DIRECCION O TELEFONO??? SE LOS AGRADECERIA ME INTERESA MUCHO
Somehow these type of tools should be forbitened worldwide by safety standards lack!my minimal experience says that even in the price of 300€ that costs here in Greece safety is not included in that money.there are a number of reasons why it is so expensive to buy and work with oxy-acetiline.
i just purchased this set im a fridgy i work in alot of different places and i get sick of breaking out the big oxy acetylene rig for a few welds and welds in awkward places which alot of those are! it took me an hour playing around with the set but i have successfully brazed 7/8 pipe no worries and i have done probably 20-25 welds on pipes from 3/8 to 7/8 and going of the regulator it is now at 50 bar(full is 110) so just over half its great! i use the 2 middle size nozzles most and tried the biggest one its overkill for most things i intend to use this kit for and i work on commercial equipment. Bottom line is at the start i was skeptical of its performance but once playing with it i have learned i like a higher fuel reg setting than whats in the book and i like the flame to be noisey(plenty of heat)
i would recommend this set fo anybody in my trade as a 2nd set, this set does not replace a proper oxy acetylene rig but its a shitload better than mapp gas alone! and its a welcome addition to my box!
Samuel Rule awesome mate. I'm a fridgy also. I was thinking of getting something in between my map torch and my regular oxy kit. And I'm sold on this after hearing what you had to say.
Thanks bud
As a retired. Frigman its the one great piece of kit that I still own,climbing ladders onto roofs its lightweight and ease of carrying plus brazing capability is fantastic,still use it now in my man cave for building those useless projects that I now have time to bodge and bend,because I can.
In the USA we do not have that stuff hear, that sucks I would love a little kit so i do not have to lug a heavy rig around
Thank for the advice
I finally managed to get my hands on one. Very well made kit, robust, with loads of accessories. I will be doint refrigerationbrazing. Should last an entire career of cared for properly. Only downside for me will be the cost of the oxygen bottle/cylinder. Here in the UK its around £25+ on its own.
I've just got one of those sets and they are the nuts. So light too. No more big oxcycetelene bottles to carry about. It's all good people
I`ve got one of these for work and it`s pretty good - Only bad thing is the Oxygen bottles don`t last very long and are expensive to replace - Is it possible get or rig up a bigger refillable Oxy bottle to one?
Mark Opie Mark, these sets are not designed to be used with any other oxygen bottles other than the genuine disposable cylinders. To extend the life of the oxygen cylinder, try using the smallest sized tip needed for each job or application. Also make sure that the fuel gas pressure is set correctly, as this could cause increased consumption of oxygen.
Link description pls.. Thank you
Are these cylinder are refillable. How to refill them
they are called disposable for a reason...
I need this for my breaching equipment
will this item cut off locks and chain fence??
Scabobble lmfao
I am searching for this type where it will available
Harbor Freight sold them for years check there inventory
สั่งซื้อได้ที่ไหน อยากได้มาใช้งาน
Can you also cut?. What's the max if possible?
+andiellio The kit is designed for welding and brazing applications. The disposable cylinders have limited capacity to ensure that the kit remains portable with regards to size and weight. Cutting with the unit (although possible) in unviable due to the larger consumption of gas for the cutting process.
Its probably worth noting for anyone not in tune with hot works that you can only 'weld' steel in the true sense of the word with Oxy Ace, you can braze with propane/mapp gas and oxy but any weld would be brittle due to hydrogen embrittlement even if it looks ok.
I wish you could buy a set with larger cylinders (5 litres water capacity) that could be refilled from a large Propane/Oxy bottle but I'm pretty sure you cant refill an oxy cylinder at home due to the risk of the combustion risk if contamination is present in the lines.
the long and short of everyone I know who has one of these jits is that the bottle are hideously expensive, last a very short amount of time and the kit usually ends up sat in a corner unused. You would be better of with a rent-free 4kg propane and a 10kg oxy on a little trolley. cheaper in the long run and not untransportable.
This turbo tool kit is not available in my country how much this welding set & what's procedure of purchasing by online or other options thank you very much for new information 😁😁
google it!
Hi, are the regulator outlets the standard 9/16" B fitting? Thanks.
+labrat7357 The Turbo Set 200 regulators sold by Tesuco as part of the kit, are fitted with G3/8" fittings.
Gdzie moge dokupic takie dysze do tego palnika?
the nozzle shop
This tool india available??
На сколько хватает кислорода / oxygen /,если варить / вельдинг/ метал 1мм.? На 60 мин.?На 180мин.?На 1200 мин.?
How can I purchase it?? please give me the link...
- Que lugar voc comprou esse kit ?
How to buy this product
Hi
where can i buy it in mexico?
use google
How to buy in india
Gold ke kam ke lea lane he Ludhiana Punjab India cost2 batao
BUENAS TARDES ME INTERESA EL EQUIPO DE SUELDA POR FABOR DIGAME DONDE LO PUEDO COMPRAR DESDE ECUADOR O ME HACEN EL ENVIO ME PODRIAN AYUDAR CON ALGUNA DIRECCION O TELEFONO???
SE LOS AGRADECERIA ME INTERESA MUCHO
How much is in dollars
Please send to prices
but why purchace this item
Please send price
Yeh kis jagah milegi
How much this complete set ,
how long is a piece of string? Country? Currency?
set oder kese kre
Super
Odar kaise kare
Hi Kahan Milega ya kitne rupees ki hai
Cost
Hi IAM from India I need this potbebal cylinder please get me the price
brazing kit that uses disposable supply cylinders costs much$$$$$$$$$$$$$$$$$$$$
Buen equipo adónde se puede comprar y cuál es su costo
El oxígeno dura media hora de trabajo
where I can buy the US
Ebay
How many rupees in this product
if I live in the us can I buy a kit
They are on eBay, but it’s $270
can you use google?
Set order kaise kare
Surendra Lodhi
Price to egypt
price ?
link for buy??
Williams Erazo
Ki price kitni hai
assalamu alaikum kya karna chahiye
It's called a cylinder or tank!
NOT a bottle! Bottle is something you drink cold drinks out!
9 minutes and the oxygen is out!!!!
No me duro nada la soldada de una válvula y se fue es un fraude estos equipos
Οι εταιρείες αναφερουν οτι κραταει 1 ωρα.....οντως σου κρατησε 9λεπτα;
Soy de España ¿donde puedo comparalo ?
Can i have this one set?
Hello can I hev this for repair gold ???
Bộ này bao nhiêu tiền
Hi
Somehow these type of tools should be forbitened worldwide by safety standards lack!my minimal experience says that even in the price of 300€ that costs here in Greece safety is not included in that money.there are a number of reasons why it is so expensive to buy and work with oxy-acetiline.
Price kya hai eska
Your contact no ple
Now is 130€
Vídeo na língua português
huevon contesten
Slam
Looks cheap
I had one and it was actually decent
Ducking Aussies.. go awwuv
hamko lena hai 7485030567
અોન.લાયનમગાવ.બતાવો
Falso.e.truffa
Correcto no dura el oxígeno más de 10 minutos
Not worth a carrot
I like carrots 🥕🥕🥕😋
Help call me
Do you know how the internet works 😂
$300 for that little cheap set, no thanks