Reptile S800 build 2019: Part 3 Radio and iNav setup
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- My S800 build playlist
• S800 Build and iNav setup
CLick SHOW MORE for further info
Taranis radio setup
• Introduction to the Fr...
iNav LUA
github.com/iNa...
CLI command for LUA Pilot view "set frsky_pitch_roll = ON"
RMRC USB extension
www.readymader...
LED setup
• Betaflight Programmabl...
S800 kit
www.banggood.c...
VTX: AKK X2 5.8Ghz 0.01mW/25mW/200mW/500mW/800mW Switchable
Receiver: FrSky R-XSR 2.4ghz
Camera: Caddx Ratel
GPS: ReadyMadeRC Mini BN-180
FC: Matek F411-WSE
Servos: Corona CS-939MG
ESC: Flycolor Raptor 30A (no BEC)
Motor: Emax RS2307 2400kv
Great video list. Thanks for recording. But i have to ask something. My s800 always going nose down. İ calibrated omnibus imu seperately, not on s800. Whst is the best way?
I'm not 100% certain on why it would dive for you. I would try adding some reflex, or adjusting the elevons up a mm or two. I'm not sure what you mean by the Omnibus IMU, are you using iNav, or just flying manually straight from a receiver using an elevon controls mix in the radio?
@@NoAgendaFPV i m using inav. İ calibrated accelerometer on flat surface, not on s800.. when i flight with stabilize mod, nose dive
@@wampelt What version of iNav? In the older versions, i think pre 4.0, You could adjust the pitch degrees in the configurator once the FC is installed in the wing. You actually want to connect the FC to the computer and then place the wing on a desk/table with the nose a few degrees up and set that value in iNav so that the FC thinks that it is at zero degrees. This is what I am talking about at 5:30 in this video. I do not remember where they moved that pitch adjustment in 5.0 and newer versions. I would suggest looking for a video from "Mr D - Falling with Style" on iNav 5 setup for newer info. I haven't flown, or tweaked my iNav planes in over a year :(
@@NoAgendaFPV i watched this video. Thanks a lot. Now i m setting up for ardupilot firmware. Than I will reach the Nirvana :)
Too far away to read settings on Taranis, otherwise good video. Thanks for sharing.
I suggest using the linked guise from Painless360 for the radio setup, popup in the video and link in description
First