P0011 camshaft position performance chevy 1.8

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ส.ค. 2024
  • P0011 camshaft position performance chevy 1.8, we were finally able to repair this vehicle by fixing the low oil pressure at idle problem

ความคิดเห็น • 12

  • @DonaldTyson-xh7hu
    @DonaldTyson-xh7hu 22 วันที่ผ่านมา +1

    pulled the spring. my veh still had only 10psi @ idle hot which is exactly what it had prior to pulling the spring. great info though. thanks. i'll put an oil pump in this one. if that doesn't fix the pressure issue, it gets an engine.

  • @dylansmith3089
    @dylansmith3089 3 หลายเดือนก่อน +1

    Brother you may have found me an answer. Got a 15 cruze, been trying to get rid of that code for days. Same scenario, replaced everything, even the cam actuators, timing belt

  • @justicebonase7420
    @justicebonase7420 5 หลายเดือนก่อน +1

    Thanks a lot am gonna try it out tomorrow morning

    • @CharmanderThug
      @CharmanderThug 29 วันที่ผ่านมา

      Did ya fix the issue ?

  • @nickklotzer3245
    @nickklotzer3245 หลายเดือนก่อน

    Did this end up working for you, im just curious because I believe that valve should be closed by the oil filter at all times and only pops up when changing the filter to allow fluid to drain down to the pan.... any reply would be great as im struggling with the same issue and it seems to act up only hott and at idle

    • @SCOPELITUS
      @SCOPELITUS  หลายเดือนก่อน

      I thought the same thing but when I got it out I can't remember what it was that changed my mind but yes the car is still good after doing this

  • @anthonygalipo9875
    @anthonygalipo9875 2 หลายเดือนก่อน

    I know this is a older video but that little value just pull out or does it twist out or lock in

    • @SCOPELITUS
      @SCOPELITUS  2 หลายเดือนก่อน +1

      Pull straight out

  • @nathanchavez7230
    @nathanchavez7230 หลายเดือนก่อน

    Question was the car jerking when it was hot?like it wants to turn off.cause mine is doing the same thing but it’s starts jerking when it’s hot.. thanks

    • @SCOPELITUS
      @SCOPELITUS  หลายเดือนก่อน

      @@nathanchavez7230 no this car was driving perfectly besides the check engine light coming on

  • @briandaeseleer7408
    @briandaeseleer7408 2 หลายเดือนก่อน

    I did everything timing chain etc all solenoids etc so I tried taking out spring still code p0011

    • @SCOPELITUS
      @SCOPELITUS  2 หลายเดือนก่อน

      Have you checked actual oil pressure with a gauge at the sensor and the back of the head? If your oil pressure is still low when you are just off idle you have a weak pump