# 3: How to Rebuild a Basic Motorsport vehicle Starter Motor

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ต.ค. 2024
  • A basic video on how to rebuild a common starter motor for a motorcycle, ATV, watercraft or snowmobile. You can order starter motor rebuild kits and brush plate assembly kits directly from www.ricksmotorsportelectrics.com

ความคิดเห็น • 85

  • @almuramoo5554
    @almuramoo5554 วันที่ผ่านมา

    2024 and still the best... You saved my life mate, ty

  • @magicconfetti
    @magicconfetti 8 ปีที่แล้ว +8

    legend.. straight forward and clean.. no crapping on about anything.. just down to business. thanks. ill do that tomorrow.

  • @MrDalegray
    @MrDalegray ปีที่แล้ว +1

    Thank you so much for this video. Now I know the right way to put the brushes in. I have always put the brushes in the the sring applying pressure. Your way will make it so much easier.

  • @donjohnson8649
    @donjohnson8649 10 ปีที่แล้ว

    Nice, simple, straight forward explanation without a bunch of drama or whoopee stuff. Obviously done by a guy that has been around the block with these things a time or two and NOT some "keyboard kommando". Thanks, Rick!

  • @scootertart
    @scootertart 22 วันที่ผ่านมา

    Great , easy to follow and informative video - ,many thanks

  • @WMDTVIDS
    @WMDTVIDS 3 ปีที่แล้ว

    outstanding video! Clear, direct and to the point. It removes worry about rebuilding my starter when the time comes

  • @capedoryus
    @capedoryus 10 ปีที่แล้ว

    For all these years I thought only wizards and generations of eltro craftsman were allowed to open starters. Now that auto eletro shops are almost a thing of the past this information is "priceless" Thank You

  • @tomscyclerecycling8242
    @tomscyclerecycling8242 5 ปีที่แล้ว +1

    Very nicely done Rick. Thanks for doing this excellent video.

  • @wirehairs
    @wirehairs 10 ปีที่แล้ว +1

    Excellent. Thank you! Only edit I might suggest is to show how to test for shorts, continuity etc. prior to the rebuild to ensure everything is useable.

  • @NikosKorakakis
    @NikosKorakakis 3 ปีที่แล้ว

    Great! Straight job!. I get short circuit when I push the starter button. How you check if everything is ok and something is not touching where it shouldn't ?

  • @luckydog9500
    @luckydog9500 9 ปีที่แล้ว

    Thanks you for the great video.
    I was needing the trick for getting the brush plate over the armature.
    I tried a sleeve, but your method looks easier.

  • @motorcyclemisadventures7542
    @motorcyclemisadventures7542 3 ปีที่แล้ว

    I like the way you did this this video. Everything was to the point. Thank you!

  • @Gtownwestldn
    @Gtownwestldn 7 ปีที่แล้ว

    best starter motor video on yt, simple and straight to the point, thank you very much sir

  • @neilwilliams5814
    @neilwilliams5814 7 ปีที่แล้ว

    Is this possible with a starter on a 2006 Impala LT 3.9 automatic or, is it different?
    Awesome video. Thanks a lot.

  • @CherylHartley30
    @CherylHartley30 9 ปีที่แล้ว

    Thanks! After extensive searching for a new starter motor for my 1978 generac generator without finding one, I decided to try refurbish the bad one, and it worked! Took it out, put neg to post, pos to body, didn't move. Refurbished, did same test, and success! Thanks again.

  • @IsdalMan
    @IsdalMan ปีที่แล้ว

    Great video.
    I have a SM-8227 starter from a Suzuki GR650 motorcycle, identical to the one in your video.
    When i disassembled it, a tiny 5mm rubber 'O' ring was loose inside.
    Anyone know where the tiny 'O' goes?
    The kits from Amazon have that tiny 'O' ring included too, so must go somewhere ??

  • @vinnyvdalidemonet8527
    @vinnyvdalidemonet8527 6 ปีที่แล้ว

    Shit! I can't believe how simple that rebuild went. I think I will rebuild my own starter(s) instead of replacing them, just because they stopped working. Thank you very much Rick, from Rick's Motorsport Electrics. I appreciate you making this video and sharing it.

  • @lessaunders2553
    @lessaunders2553 6 ปีที่แล้ว +1

    Hi, just about to rebuild the starter for my Suzuki GR650X, great video

  • @daniloalmazan5786
    @daniloalmazan5786 9 ปีที่แล้ว

    thanks for your video it helps a lot to understand whats inside the starter motor.God bless

  • @gustavoah5540
    @gustavoah5540 8 ปีที่แล้ว

    a very clear explanation , but in my case the magnets were loose
    and could see that two of them attract and those same repel with the other two ,
    so intercale four , so that I face each out otherwise ,
    ie N and S. but the engine does not work.
    with a tester I see as the impedance varies in the positive and negative terminals
    of motor turning it by hand , so q I think that the electric part is fine, and I'm doubt magnets position, it is not easy unstick
    can you help me

  • @Sugarkryptonite
    @Sugarkryptonite 7 ปีที่แล้ว

    Is it normal that the commutator is so thin? Mine is a bit thicker but it's also worn in a concave pattern. I have a lathe and was planning on cutting it down flat, but was worried it was gonna be too thin. Now that I see yours I think I'll go ahead with it. But is it normal that they're this thin or is that worn out too much?

  • @mariusm5187
    @mariusm5187 10 ปีที่แล้ว

    Very good video. Detailed and clear. Well done

  • @stevencurrie8171
    @stevencurrie8171 8 ปีที่แล้ว +4

    check bushings for play,clean groves on commutator

  • @bradyrather4606
    @bradyrather4606 10 ปีที่แล้ว +9

    Very Informative. If it wasn't for this video, I would have spent $200 on a new starter for my bike. Thanks to you, I had the courage to do this myself! Total investment: $33

  • @WestronicsIrl
    @WestronicsIrl 8 ปีที่แล้ว

    You can get new quality alternator & starter motors parts at saverepair.com. Enter you part serial number and it will bring up all parts that are suitable for it.

  • @markvisser3584
    @markvisser3584 6 ปีที่แล้ว

    Excellent video thanks for showing. Much appreciated.

  • @kenword7447
    @kenword7447 8 ปีที่แล้ว

    Hey rick I hope yo can help me.
    I have a '83 V65 magna and the polarity seems to have reversed and instead of counter clockwise, its now clockwise. How can I reverse the polarity? Can I switch the caps so it goes in the correct direction? The starter motor is strong but the bike did sit for 12 years before I purchased it.

  • @altlandf
    @altlandf 5 ปีที่แล้ว

    I have a 82 honda cm250 starter doesn't work. I know the solenoid works. But can't get starter off because of exhaust is in the way. Can't get last bolt off. Then they make bolt way too long. If brushes were replaced would it fix problem?

    • @RicksElectrics
      @RicksElectrics  5 ปีที่แล้ว

      that could solve the problem, but can't be sure unless you open up the starter motor.

  • @RicksElectrics
    @RicksElectrics  11 ปีที่แล้ว

    We have brand new starter motors for the ZX6E - just head over to our website: ricksmotorsportelectrics. com to order

  • @heartsf
    @heartsf 10 ปีที่แล้ว

    Thank you, Rick, that is really helpful!

  • @wenbiaoliang
    @wenbiaoliang 11 ปีที่แล้ว

    Is a motorcycle start fully engaged to the flywheel's teeth 100% time? i mean, a car's starter has mechanism to "push the gear out to engage to the flywheel", but a motorcycle's starter does not have those. Thanks!

  • @peterb1044
    @peterb1044 4 ปีที่แล้ว

    Hi I got problem with my starter motor for Honda vtr1000 I assembled it with brand new brushes and brush plate. Cleaned commutator area. There is not continuity between commutator and shaft. And is continuity between each all segments of commutator. So all is fine as should be according to manual. I got heavy sparking when going after connect battery ,shaft not moving. I checked this with second spare armature and is exactly this same problem. I tested any leaking to ground between positive brushes to housing or to shaft -no evidence of leaking on multimeter. What can be reason ? Is possible problem with armature but what sort? As I said tested leaking on commutator between it and shaft I even use other spare armature and tested it -all fine ,what can be reason of this heavy sparkling and not rotate of shaft?

    • @RicksElectrics
      @RicksElectrics  4 ปีที่แล้ว

      Hi Peter,
      Heavy sparking is indicative of a dead short. However, it is extremely difficult to diagnose this sort of problem over a message board. If you send us the starter motor we'd be happy to take it to the shop and diagnose it.

  • @RicksElectrics
    @RicksElectrics  11 ปีที่แล้ว +2

    Glad to help guys!

  • @frankt2746
    @frankt2746 7 ปีที่แล้ว

    starter would not turn over. Tore it apart, tested the armature and it was fine, cleaned the commutator and sanded the brushes, works fine. Thanks for the video.

  • @ihatnecksered
    @ihatnecksered 10 ปีที่แล้ว +1

    It drives an intermediate gear which has a centrifugal clutch that 'free wheels' once the engine is spinning.

  • @WILLY52368
    @WILLY52368 2 ปีที่แล้ว

    Did I screw up my starter when I unknowingly did not mark it in the beginning stage prior to removal?

    • @RicksElectrics
      @RicksElectrics  2 ปีที่แล้ว +1

      If it's been put back together already and is not running correctly, then yes the polarity could be off. Many starters do have alignment marks on them from the manufacturer and/or alignment tabs between the body and brush plates that can also be used. We recommend putting unique marks on both ends before opening an unfamiliar starter to be on the safe side.

    • @WILLY52368
      @WILLY52368 2 ปีที่แล้ว

      @@RicksElectrics Yep found it, had to get it cleand up really good to see it first however I can tell just by looking at it it will need new brushes. But I would like to a big thank you for responding. I have been going through a rough time here in my home town dealing with trying to parts from my local shops. They say one thing but I never hear back from them, I try calling back and its always a voicemail. I like to do it person so I know what I'm dealing with but, that's what I'm working with here. I take my chances on-line 🤬

  • @lancelottavola9685
    @lancelottavola9685 6 ปีที่แล้ว

    Hi Rick, nice work,tell me if its to solder new brush or need to buy a new plate with the brush ?

    • @RicksElectrics
      @RicksElectrics  6 ปีที่แล้ว

      That depends on what your problem is... What year/make/model do you have?

    • @lancelottavola9685
      @lancelottavola9685 6 ปีที่แล้ว

      Its a Kawazaki Z440 year 1983, need new brush. there are two Nort and two South, here in my country they not sell a new plate, I think I need to find somewere the brush with the same size and made the adaptation...

  • @luisdlc21
    @luisdlc21 7 ปีที่แล้ว

    I HAVE ONE FROM A ATV BUT IT SEEMS LIKE IT ARKS I WANT TO REBUILD IT IT SEEMS I VERY GOOD CONDITIONS INSIDE BUT SEEMS LIKE IT IS SHORTED HOW CAN I FIND THE PROBLEM I HOMED IT AND RESULTS LIKE 00.5 LIKE IF ILL BE TOUCHING THE CASE ONLY

  • @r.tillery575
    @r.tillery575 5 ปีที่แล้ว

    Old post I know, how 'common' is it to not have a removable insulator but rather a fiberglass 'tape' just stuck to the inside of the housing?

    • @RicksElectrics
      @RicksElectrics  5 ปีที่แล้ว

      Sounds like your starter has been "repaired" before without the proper pieces as that is def. not common.

  • @auto5man
    @auto5man ปีที่แล้ว

    wow, awesome how to video!

  • @GREENTHUNDER0
    @GREENTHUNDER0 4 ปีที่แล้ว +1

    What happens if I forgot to put the marks on the case when I took it apart?

    • @RicksElectrics
      @RicksElectrics  4 ปีที่แล้ว

      Andre Rivera we can fix it for you if you send it to us. Should only be a minimal fee.

    • @tomcollins1765
      @tomcollins1765 4 ปีที่แล้ว

      Andre Rivera Nothing. Fit it back together with a little patience until the screws align on both sides and everything is set nicely. Hold the Sharpie.

    • @GREENTHUNDER0
      @GREENTHUNDER0 4 ปีที่แล้ว

      Tom Collins what do you mean when you say align? What is the actual purpose of putting sharpie marks on the case?

    • @RicksElectrics
      @RicksElectrics  4 ปีที่แล้ว

      @@GREENTHUNDER0 what bike do you have? Most are "keyed" so that the magnets properly align with the orientation of the brush plate (so you wouldn't need the sharpie as Tim says). Many starters also have stamped in hashmark alignment marks but not all of them.

    • @GREENTHUNDER0
      @GREENTHUNDER0 4 ปีที่แล้ว

      Rick's Motorsport Electrics ahh ok. I have a 4 brush starter for an 85 Yamaha virago xv700n

  • @EstebanViquez
    @EstebanViquez 6 ปีที่แล้ว

    I have a Yamaha XT225 and one of the magnetos came off and I don’t know what kind of glue I should use to get it back and stay in its position 🤔🤔

    • @RicksElectrics
      @RicksElectrics  6 ปีที่แล้ว +1

      We do not reglue/repair the magnets inside the starter motor. Unfortunately we'd recommend replacing the whole starter. We sell a brand new one of the 2008-2012 models: ricksmotorsportelectrics.com/New-Yamaha-Starter-Motor-61_417

    • @EstebanViquez
      @EstebanViquez 6 ปีที่แล้ว

      Thanks for your message I have bought from you some parts already All excellent quality
      This magnetos, I just bought a good super glue and put then back and it is working so far, so good!

  • @ironhorse220
    @ironhorse220 6 ปีที่แล้ว

    Very informative video great job

  • @kentfriesen7018
    @kentfriesen7018 4 ปีที่แล้ว

    What about the bushings?

  • @RicksElectrics
    @RicksElectrics  11 ปีที่แล้ว

    We use a commercial parts cleaner to clean all of our materials, blow it dry and let it sit over night.

  • @tbender4
    @tbender4 11 ปีที่แล้ว

    Thanks for the video, very detailed.

  • @ImaLoneWolfintheWoods
    @ImaLoneWolfintheWoods 5 ปีที่แล้ว

    Lol the manufacturer says "do not use Emory cloth or sandpaper on the commutator, I used some 800 grit then 2000grit and works like new now. Seems they just want you to buy a new OEM one

  • @synxzzz2208
    @synxzzz2208 8 หลายเดือนก่อน

    My service manual makes it known very firmly that "the service motor is unserviceable and MUST be replaced"
    Can i just ignore this????

    • @RicksElectrics
      @RicksElectrics  8 หลายเดือนก่อน

      What is the year/make/model of your machine?

  • @photocowan
    @photocowan 11 ปีที่แล้ว

    mine is swamped in oil??? what seal is leakin help!!

  • @apodarthoaailsa1266
    @apodarthoaailsa1266 9 ปีที่แล้ว

    wow! its awesome...
    will give a try

  • @BAHRAMCR
    @BAHRAMCR 11 ปีที่แล้ว

    Thanks, great video. I may need a starter for a zx6 1993 e1.

  • @MrKatana07
    @MrKatana07 10 ปีที่แล้ว

    outstanding video, thank's

  • @MrDeancoote
    @MrDeancoote 7 ปีที่แล้ว

    A great help thanks.

  • @triverman
    @triverman 9 ปีที่แล้ว

    great video,

  • @4hool
    @4hool 6 ปีที่แล้ว +1

    Big Thanks!

  • @miguelcolon8929
    @miguelcolon8929 6 ปีที่แล้ว

    Where you get the kit from?

    • @RicksElectrics
      @RicksElectrics  6 ปีที่แล้ว

      We sell brush plate rebuild kits for most bikes/ATV's - what year/make/model do you have?

  • @andrewrich4046
    @andrewrich4046 6 ปีที่แล้ว

    Very helpful .thanks

  • @arvindiokno533
    @arvindiokno533 7 ปีที่แล้ว

    Helpful video!

  • @cbcslk
    @cbcslk 7 ปีที่แล้ว

    great video.Thanks

  • @TheNatesworship
    @TheNatesworship 11 ปีที่แล้ว +2

    Great video! Thanks!

  • @Bnsso
    @Bnsso 7 ปีที่แล้ว

    thank-you nice job

  • @jpoyvilleza
    @jpoyvilleza 8 ปีที่แล้ว

    i try to do that..! :-)

  • @williammcqueen6314
    @williammcqueen6314 ปีที่แล้ว

    My starter is spinning backwards😂 tf is happening

    • @RicksElectrics
      @RicksElectrics  ปีที่แล้ว

      Did it spin backwards after you "rebuilt" it?

  • @skbhartiya5115
    @skbhartiya5115 4 ปีที่แล้ว

    Sar ise Hindi mein bataiye na

  • @circusboy90210
    @circusboy90210 6 ปีที่แล้ว

    it would be great if you could learn to pronounce the letter R . what are you japanese or black?

    • @RicksElectrics
      @RicksElectrics  6 ปีที่แล้ว +2

      It's called New England, kid ;)