ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Metal Emergency Staircase Handrail Build | JIMBO'S GARAGE
ฝัง
- เผยแพร่เมื่อ 18 เม.ย. 2018
- I've built quite a few metal handrails over the past couple years but this one is a little different in that the biggest section is on an angle and making sure it came together properly. This outdoor staircase is at an emergency exit of a commercial building. I welded the metal handrail with the new Everlast MTS 252 STi with water cooler.
Subscribe to Jimbos Garage: bit.ly/JimbosGarage
Favorite tools:
Walter Grinder: amzn.to/2DWrKOY
Buy a Jimbo's Garage T-Shirt here: www.jimbosgarage.com/shop
Camera I use: amzn.to/2CfEFOi
Follow Jimbo:
Facebook: / theofficialjimbosgarage
Twitter: / jimbosgarage
Instagram: / jimbosgarage
Support us on Patreon:
/ jimbosgarage
About Jimbo's Garage:
Jimbo's Garage is a channel to see cool metal welding and wood projects.
Your clients must be please knowing that they can always watch your channel and see all the effort you put in your work to make the project an excellent outcome.
Thanks for watching Tayvin, Some of them do. Jimbo!
Dude outstanding man. Amazing build
Jimbo, I caught a few of you videos drawn to your welding expertise. On this project, I have a problem . In the Uniform Building Code, we have to apply lateral forces to the handrail. It cannot flex which the stair run portion of your handrail would do. We would typically have vertical posts at 36" on center maximum to prevent that from happening...other than that, I salute your expertise, craftsmanship, and attention to detail.
Every way you went through the work and explaining is exactly how I do it and also how I felt when I did indoor Stair railings. Especially a Guard Rail I made that was in complex form! I was so nervous but all experiences and mistakes from before helped me and everything fit perfectly upon installation! Loved the video.
Esos trabajitos para mí son pan comió muy fáciles de hacer.Tu trabajas bien.
You can tell if a craftsman takes pride in his work by the condition of their shop. Nice work.
Thank you for sharing this with us.
That was not an easy build. A testament to your skills. It may look like you’re just slapping things together, but there’s a lot of planning going on in your head to have it fit perfect like that on the first try. Excellent work!
Thanks for watching James, I'm glad you see that! Jimbo!
Facts.
Good tip about the little tool pouch! I’m about as ADD as they come and am always laying something down and immediately Forgetting where I laid the damn tool.
Also thanks for making me lust over your welder! What a machine!
Hey, great share. I use these type of handrails all the time. Thanks for showing us how it’s done.
Great job Jimbo. Angles can be challenging but if you do your homework and double check your measurements and preparation it generally works out OK. That looks like a nice mig machine. Well done.
Again great job Jimbo I need to make a small piece of railing, about a third of that size. you make it look so easy, now I know I can do it.hopefully look as good as yours thanks again
Looks great! Glad everything fit at the job site 😁
Great build, I totally understand about sanding the welds down, it can really add to the finished look. Thanks for sharing.
Thanks for watching Walter, Jimbo!
Great job Jimbo.
Looks excellent! Grinding the welds down is definitely the way to go. Unless you’re building it for a herd of buffalo.
I just did my first hand rail project and I'm in total agreement with you on the nervousness of getting the angles right. What a pain but it came out nice. Great video.
Great job Jimbo! I enjoyed the video.
Once again awesome 😎
Looks great.
Hey Jim, I just read your interview article in “The Welder” last night. It’s gotta be pretty cool to know you’ve been featured in a magazine. I love your content. I’m 26 years old and finally following my dream from 10 years ago of becoming a welder/fabricator. My family always told me I didn’t want to work with my hands for the rest of my life. After blowing a disc in my back working a job I hated I spent a lot of time soul searching which included purchasing a dirt cheap flux core welder from Harbor Freight on Black Friday. That night I put everything together and tried laying a bead on some scrap exhaust parts I had lying around and I immediately fell in love. I’m currently self taught on flux core and mig until I can come up with the spare cash to go to school for welding. I love learning and can’t wait to progress in this trade. I really appreciate the content you provide, especially the layout tips as that’s something that’s really hard to learn on your own. Looking forward to future videos!
Regards,
Jake
Thanks for watching Jake, Keep following your dreams, Do what makes you happy. I know i do! I love working with my hands. Jimbo!
You want to earn big, get into TIG .. Of course learn them all, but not everyone can TIG.
Excellent job
Keep it going Jim.
Great video, always a wealth of knowledge.
Great Job!!!
Thanks for watching, Jimbo!
Looks awesome man!!
good job. looks good
Beautiful Jim, as always. I’m constantly amused that you never seem sure that things will work out until it does. But it does!
Thanks for watching Mel, Jimbo!
nice job looks really good 👍
Ficou muito bom, Excelente Trabalho Parabens !
Great video as usual! One quick tip that might help is to flip the corner vice upside down. That lets the two pieces of metal sit flat on the table.
You do excellent work.
Wow... Looks like this is going to be in my future as well. Those bolt together pieces at the hardware store just look so junky. Hopefully I can muster up your patience because this thing is gorgeous!
Great build. Always enjoy your work...
Thanks for watching Kenny, Jimbo!
Another great video👍would love to see on your videos how u measured up on site at the start and the installation
Jim, you metal work is looking great. Nice job and it turned out well.
Thanks for watching Richard, Jimbo!
great video!!!!!
nice work
Great craftsmanship as usual jimbo keep it up.
Thanks for watching Jeff, Jimbo!
That looks great.
Thanks Ken, Jimbo!
Nice job.
Nice Work
Corner clamps are almost a necessity for building any type of frame. I have one Bessey, and made the rest out of 3/8 plate and 2' x 3" x 3/16" angle. I almost like the ones that I made, better than the Bessey. I have more open area to weld the joints, with the home made clamps. I wouldn't want to be without them. Looks like the project turned out great! Good timing, too, since I have a small one to build in the next few weeks. Thanks for sharing this project!
Thanks for watching John, Jimbo!
Good work, I'm a 1 glove type guy also
exelente trabajo..
Great work Thanks
Welds properly performed will penitrate base metals. The weld joints he was grinding were half butt joint and half "t" joint. The "t" joints were not ground at all and the edge or butt joints were ground flush but that thin of wall was very much penitrated . In short.... that railing if not demolished will be here long after we all croak! Good job jimbo!
Great work Jimbo!! You always have helpful little tips as you’re doing these projects. Keep the vids coming. 👍🏼
Well done! Greetings from Norway... 🇳🇴
Thanks for watching from Norway!, Jimbo!
Welding is the strongest and fastest drying Glue in the world and most easy to undo little mistakes. So don't ever --> worry again.
You're already a great designer and welder.
Enjoyed the video, I like long video's. Because there is more to watch and enjoy.
2 thumbs up Jimbo
Thanks for watching, Jimbo!
If you stop worrying, you start making stupid mistakes. Always worry and double and triple check everything.
Good stuff Jim 💯🎯
Thanks for watching and your support Quentin, Jimbo!
Grind that weld!
I ask why this isn't done more often. I understand strength, but this is also an aesthetic piece. Grind away and make it look its best!
Absolutely wonderful job Jim!!!!!!!!!!!!!!!!
Thanks for watching Dave, Jimbo!
Nice job! Greetings from Poland!
Thanks for watching from Poland, Jimbo!
Wow. Nice Everlast welder you are using.
MAESTRO 👌👍
Nice work
Grinding your welds is fine. With the penetration , the “cap” above the base metal does not provide any extra strength and I’m sure you know that Mr Jim. I was just commenting on the one that questioning you grinding your welds. Nice work brother.
We have the sleeves at work I think they’re mostly for grinding and cutting because you still feel every little thing it lands on your arms
Very nice ! 😍😏
Good Job Brother!
Thanks for watching Edward, Jimbo!
Yep came out nice.
Good shit Jimbo
awesome welding and fabrication
Thanks for watching, Jimbo!
Wow great project! I’d probably do that job onsite if it was me!
Ace #1
Verry good job
Thanks for watching, Jimbo!
Отличная работа 👍
Честно говоря, они всегда приветствуются на русском языке
Nice
Simple yet neat, good job, if your a little nervous about getting the angle right just draw out the rise and length on the ground from point to point and connect the dots, if you have the space to do so that is
Thanks for watching Keith, And you advise! Jimbo!
Dang stucco is jacked ☝
cool amigo.
Quick tip for laying out spindles is I use BalusterPro on my iPhone and Android has a version to simple and quick and all spindle spacing swell be equal great video by the way
WOW nice ,, Awesome welding >
on a handrail, they're called balusters (from the french balustrade). pickets are the same thing but for a fence. i know, a handrail is kind of a stair fence but they're still called balusters because they connect and unify the footing and the coping of a handrail. if they're turned, then they are sometimes referred to as spindles.
I was thinking the same thing every time he said “pickets”
Another great project well done! I'm with you on sanding or grinding parts of the weld. It looks so much cleaner and the interior welds are still there for reinforcement. It is this attention to detail that makes these jobs come out looking so nice. I bet those angles were tough to get right?
Thanks Brian for your support, Jimbo!
great looking handrail build jimbo,if handrails were classed as beautiful ,then this ones it lol ,great work as usual ,it becomes really hard to comment on your jobs jimbo ,because you know right away before watching ,that your a great fabricator ,welder,and your attention to detail is going to be great,and the final product is going to be spot on,anyway ,always a pleasure watching your vids ,may you make many more ,i for one will always be watching,all the best..............dougie
Thanks for all your comments and support dougie! i truly appreciate it. Jimbo!
Thanks for the video. U make it seem so easy. From Cyprus
hello, nice to meet you
I am not a welder and I've watched so many of these vids.
I love your attitude about grinding welds and making it right ! Aluminum is the way to go here in Florida and almost everything I do is punched thru blind weld. Steel require 3-4 times the cost of aluminum if is done right. At least 2 times as much just in the welding. Yours is done the way it should be.
Great job jimbo! Really nice fabrication and it looked good installed!
Thanks JD, I appreciate it. I gotta get me some of those fire ball squares, Those things are nice!
JIMBO'S GARAGE I promise you won't regret it! I actually have a vise like you use but the fireball squares have a couple more ways to square that makes them so nice.
I bought some of those thanks to you JD.
Hi sir very good job god bless you
Thats awesome. I wouldve made the second straight railing laying the table just like the first one. It would've been easier to build. And much more easier to fit in the job site just in case something is wrong. Only downside is you will have to finish it with a stick welder outside. But good job!
Hi,from Serbia! :)
I like the Welds ground down as well looks and feels much better to.the client.
Nice work! Hope you didn't have to mess around too much during install. It is too nice to just be an emergency exit. (There are a few code issues with it)
U r in chingo 👍
been building this stuff for last 60 yrs
Thank you for your videos,from Victoria Australia,you keep your workshop so very clean and tidy.
Thanks for watching from Australia William, Jimbo!
Just finished a similar job.... Your's is looking better.
Nice job and the math was right.
2:19. I saw that Jim 😉😉😉
Beaut 👏👏👏
look real nooice
Just subscribed love wot you do
Thanks for watching, Jimbo!
There’s nothing wrong with grinding welds smooth if you actually prep your pieces right so you’re not grinding all of the weld off and eventually over time it’ll crack
Always a treat to see you building out of steel, first comment?
Thanks for watching Will, Jimbo!
Hi Jim, I've been a joiner 34yrs but still have to give staircase spindles some thought even though I've done many of them 😂
Thanks for watching, Jimbo!
Thank u sir
Turned out great and fits perfectly.
Spindle spacing can be an issue but as you said, when you adjust the last few spaces your eyes won’t pick up the change but you sure will see a crooked spindle.
Thanks for watching Wayne, Jimbo!
This is how you do the perfect spacing, inside dimension ( 36" ) if you are using let's say 3/4" pickets 36 div by 4 ( 4" is the max spacing per code ) = 9 spaces, now multiply 8 pickets x .75 = 6. deduct the 6" from the inside dimension 36-6 = 30, div 30 by 9 =3.33 ( 3-5/16" ) cut a 3-5/16 pc and use as spacer between pickets.
I use an Evolution cut-off saw (Raptor model) to cut metal for my projects and I don't have to clean up the ends afterwards, their ready to use 'as is'. I was just wondering if you have ever tried one of these machines out for yourself. I save a lot of time NOT having to smooth off the cut ends.