That's the best self help auto video I've ever seen! It's short and sweet! Music is good and not too loud. No BS and straight to the point. Thanks, Dennis.
Great video, mine leaked fuel due to rusted fuel lines out of the tank, dealer said it was a $3000 repair. Following this video I could just cut out the rusted parts and use a rubber hose instead. Cost, about $10 and 6 hrs of work, most of that getting the rusty tank bolts out.
It will take more than "rubber hose" to replace these fuel lines.This system runs high pressures that "fuel line and a normal hose cl;amp are not designed to handle. You will need fuel injection hose and clamps to match.
After the new pump is installed (and new gas added to the tank (c; ) when you are going to start the engine, it's a good idea to turn the ignition switch to "On" or "Run" position--BUT DO NOT START THE ENGINE--then turn the switch off. Do this a couple of times, leaving it "On" for a few seconds each time. This allows the pump to pump gas up to the engine and fill the fuel system. Then after a few on-and-off cycles, try starting the engine.
Exelente video felicidades. Por favor me puedes indicar dónde se encuentra el Relat de la bomba de gasolina o fusible le cambié la.bomba de gasolina y no le pasa corriente. Gracias
The fuel tank doesn't need to be removed, there's 2 access panels under the rear seat, this is how the fuel pump is removed to change the filter, but mine is a 2005-could be different
@@joshpergram7818 how did you get the tank to drop? Mine is 2000 model and I might need to hammer it loose. Buggered if I can reach the electrical connectors to undo them
thank you so much 4 this great video but I want to help me about the fuel pump and filter of a mitsupishi space wagon 2002 shall I make the same way to change them?
Great video, but after you disconnected the second to the last hose, you didn’t talk about how to remove that little right angle connector, and your hand was in the way the entire time. How do you get that thing off? I’ve tried pinching it with my fingers on both sides, can feel it squeeze a little bit, but will not back off the hose flare.
and now, can we look at montero 3.2 TD 5 door variant which has two pumps? i have a car that leaks diesel when tank is filled, and aparrantly the garage does not get it fixed for good. their best record is 1 month after fix it started to leak again.
I have a half a tank of 2 year old gas in my 2000 Montero and I can't siphon it out for some reason. Mitsbishi Montero sport 2000. siphon hose keeps getting stuck like 2 feet in. any ideas? please help!!!
Start with a pressure test. If the pump fails the pressure test next is a voltage drop test. The pump may not have enough power to pressurize the system leading you to believe the pump bad. If the pump is getting good voltage and there are no reasons to believe there are restrictions in the lines; crimps, the filters are know to be clear it is most likely the pump at fault.
If you are replacing the pump because your car won't start you can skip step one. (If there was pressure in the fuel lines your car would start and you wouldn't be doing the job in the first place)
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
That's the best self help auto video I've ever seen! It's short and sweet! Music is good and not too loud. No BS and straight to the point. Thanks, Dennis.
شكراً كثيرا
هذا ما كنت أبحث عنه حرفياً
Great video, mine leaked fuel due to rusted fuel lines out of the tank, dealer said it was a $3000 repair. Following this video I could just cut out the rusted parts and use a rubber hose instead. Cost, about $10 and 6 hrs of work, most of that getting the rusty tank bolts out.
It will take more than "rubber hose" to replace these fuel lines.This system runs high pressures that "fuel line and a normal hose cl;amp are not designed to handle. You will need fuel injection hose and clamps to match.
After the new pump is installed (and new gas added to the tank (c; ) when you are going to start the engine, it's a good idea to turn the ignition switch to "On" or "Run" position--BUT DO NOT START THE ENGINE--then turn the switch off. Do this a couple of times, leaving it "On" for a few seconds each time. This allows the pump to pump gas up to the engine and fill the fuel system. Then after a few on-and-off cycles, try starting the engine.
It’s called priming the pump
Excellent vid. Really well done.
thank you for your time and expertise
Its a different ball game when all of those hose clamps and bolts are in advanced stages of corrosion..
Welcome to the salt belt part of the country! Everything becomes exponentially more difficult with the addition of corroded fasteners.
Exelente video felicidades. Por favor me puedes indicar dónde se encuentra el Relat de la bomba de gasolina o fusible le cambié la.bomba de gasolina y no le pasa corriente. Gracias
The fuel tank doesn't need to be removed, there's 2 access panels under the rear seat, this is how the fuel pump is removed to change the filter, but mine is a 2005-could be different
Mine is 2001 and I just checked it under seat.. and no access
@@joshpergram7818 how did you get the tank to drop? Mine is 2000 model and I might need to hammer it loose. Buggered if I can reach the electrical connectors to undo them
Good video
Thank you dude! This video was very helpful
Great to hear the video was helpful... Thank you!
yes very good info on video!!
thank you so much 4 this great video but I want to help me about the fuel pump and filter of a mitsupishi space wagon 2002 shall I make the same way to change them?
EXCELLENT!! more videos about montero sport :)
@@huntereakright8988 ahh ok 🤣
Excelent video !!! Thank you!!!
thanks
Where would the inertia switch be on a 2001 Mitsubishi Montero Limited??
very good , so you hace Abu vídeo about replace fuel pump of mitsubishi montero limited 2006? thank you
Great video, but after you disconnected the second to the last hose, you didn’t talk about how to remove that little right angle connector, and your hand was in the way the entire time. How do you get that thing off? I’ve tried pinching it with my fingers on both sides, can feel it squeeze a little bit, but will not back off the hose flare.
i agree,my issue also
Did you put any fuel back in the tank
what would you do if the bolts holding the tank are rusted so bad that you can't get a good grip at them???
and now, can we look at montero 3.2 TD 5 door variant which has two pumps?
i have a car that leaks diesel when tank is filled, and aparrantly the garage does not get it fixed for good. their best record is 1 month after fix it started to leak again.
Mine is a 2002 and it has NO!! access panel under the rear seat.
COOL THANKS
ame este video
Me alegra que te guste. ¡Gracias!
@@AirtexFuelPumps tengo esta camioneta, y me es de mucha ayuda estos vídeos.
Hi! Great video! We wanted to ask you what did you put inside the tank to clean it up in minute 4:35. Thanks in advance.
Thanks!
I have a half a tank of 2 year old gas in my 2000 Montero and I can't siphon it out for some reason. Mitsbishi Montero sport 2000. siphon hose keeps getting stuck like 2 feet in. any ideas? please help!!!
mitsubishi pagero sport 3.0 petrol engine good ?or diesel ?
Quick question, I have a Mitsubishi Montero Wagon from 2005, are the locations of the relays the same? I cant seem to find mine anywhere in the car.
In a 2005 Montaro there are two fuel pump relays. Both are under the hood on the drivers side behind the shock tower.
How do you know the old fuel pump is bad ?
Start with a pressure test. If the pump fails the pressure test next is a voltage drop test. The pump may not have enough power to pressurize the system leading you to believe the pump bad. If the pump is getting good voltage and there are no reasons to believe there are restrictions in the lines; crimps, the filters are know to be clear it is most likely the pump at fault.
Thank you very much - my friends 2002 Montero won't start - he changed the fuel pump but didn't check the voltage on the relay - to start the pump ?
If you are replacing the pump because your car won't start you can skip step one. (If there was pressure in the fuel lines your car would start and you wouldn't be doing the job in the first place)
Montero 2002 no start no fire
how to fuel pamp timing mitsubishi v96 pajero jeep
I am sorry. I do not understand your question.
I have Pajero 2003 Montero low option
Montero 1996
Comoros reparations la calefacsion de mustan 289 de 1968