After the VTP and Hi End box with separate amplifiers for the speakers not separator with inductance end condensers for me actually others boxes is not important because bad sound and problems with the speakers ...i use 3 amplifiers with separate volume after the filters for low medium and hight frequencies simple RC filters forr low signal...the sound is briliant not defazage or interferencies and cable with 4 conductors for 380 v is verry good...power of the music not fake for us .A good day for you !
My post is the solution proved in practice not economy best results for long time...can use my project wih 4 conductors cable with 3 separate amplifiers so good solution .for home use tubes same solution...
That Serbian tweeter is really not bad, but, like all tweeters, sometimes it can emit that metallic tone. If you have patience, take it apart. stick a circle of absorption material on the central part of the magnet, no thicker than 3mm. You will get a class better tweeter and completely lose the metallic resonance. If you lose sensitivity, reduce the resistors in the crossover.
wow, using the whole back panel as the crossover board 😆 do those plastic bags not make "plastic bag sounds" from the bass, audible through the ports?
🙂thanks for your comment .... the glass wool should be not in the plastic bag 🙂
After the VTP and Hi End box with separate amplifiers for the speakers not separator with inductance end condensers for me actually others boxes is not important because bad sound and problems with the speakers ...i use 3 amplifiers with separate volume after the filters for low medium and hight frequencies simple RC filters forr low signal...the sound is briliant not defazage or interferencies and cable with 4 conductors for 380 v is verry good...power of the music not fake for us .A good day for you !
My post is the solution proved in practice not economy best results for long time...can use my project wih 4 conductors cable with 3 separate amplifiers so good solution .for home use tubes same solution...
@@LaurentiuFrunza-bg1it Thanks for your comment.
@@LaurentiuFrunza-bg1it Thanks for your comment.
I like more passive filters 👍
Thanks for your comment.
That Serbian tweeter is really not bad, but, like all tweeters, sometimes it can emit that metallic tone. If you have patience, take it apart. stick a circle of absorption material on the central part of the magnet, no thicker than 3mm. You will get a class better tweeter and completely lose the metallic resonance. If you lose sensitivity, reduce the resistors in the crossover.
I even drilled pole peace (after protecting air gap) to installed back chamber, it was bit better then just dumping material but not worth the hassle!
Thanks for your comment
Nem aprózták el a hangváltót!👍
Thanks for your comment.
🎀💎🎀☑☑☑☑
Thanks