Ford Model A Horn and Light Switch Rod Replacement | Steering Rebuild
ฝัง
- เผยแพร่เมื่อ 18 มี.ค. 2023
- Episode 26 - 2-Tooth Steering Rebuild - Rebuilding the Horn and Light Switch Rod
Check out the rest of the Ford Model A Restoration series at
/ epicrestorationz
On this episode of Epic Restorationz George and Chris finish up the 2-tooth steering rebuild by installing a new horn and light switch rod. Join us as we show you how we worked through some fitment problems with some reproduction parts and got our steering rebuild wrapped up and on the car. The Ford Model A restoration continues at Epic Neon.
Epic Restorationz shirts and merch - epicrestorationz.creator-spri...
How to Disassemble 2-tooth Steering Gearbox on a Ford Model A
• 1930 Ford Model A 2-To...
How to Install a new Worm Gear from a 2-tooth Steering Gearbox on a Ford Model A
• 1930 Ford Model A | 2-...
How to Rebuild a 2-tooth Steering Gearbox on a Ford Model A
• 1930 Ford Model A | 2-...
How to Rebuild a Ford Model A Steering Column
• Ford Model A Steering ...
How to Replace the Horn and Light Switch Rod on a Ford Model A
• Ford Model A Horn and ...
How to Remove Hinge Pins from a Ford Model A
• Ford Model A | How to ...
How to Remove a Ford Model A Gas Tank
• Ford Model A | How to ...
How to Clean and Seal a Ford Model A Gas Tank
• Ford Model A | How to ...
How to Install Emergency Brakes on a Ford Model A
• 1930 Ford Model A | Em...
Music Credits
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/matrika/smack-that
License code: 3GVD5QICO9TMYW4H
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/paul-yudin/your-...
License code: X35EVYLDXJIDDLOD
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/abbynoise/puncher
License code: UARWBDNNNE4CCUCA
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/yeti-music/dead-...
License code: J7W0RA3ROAUI2XZ8
Song: RocknStock - Power
Music provided by Tunetank.
Free Download: tunetank.com/track/1458-power/
Song: RocknStock - Rock It (No Copyright Music)
Music provided by Tunetank.
Free Download: bit.ly/2SocHGV
Video Link: • RocknStock - Rock It (...
Epic Neon Sign Company
www.epicneon.net
Disclaimer:
Videos produced by Epic Neon Epic Restorationz are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here are used to simply breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. Epic Neon Epic Restorationz does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their automobiles they are doing it at their own risk and Epic Neon Epic Restorationz cannot be held liable if they cause any damage to their vehicles. It is the sole responsibility of the viewer to educate themselves on their installation requirements before undertaking any sort of project. Be safe and have fun with your cars and restoration projects
#epicrestorationz #epicneon - ยานยนต์และพาหนะ
![ไม่ต้องมีที่ที่ให้ฉันอยู่ แต่ขอแค่มีฉันอยู่ก็พอ (Spaceless) - getsunova [OFFICIAL MV]](http://i.ytimg.com/vi/4N8idbxZ-7M/mqdefault.jpg)
To any new model a owner, this video is a must, especially if you're purchasing new parts,and you know they come from China,so you have to first see how everything everything fits together.Before you think you can assemble it to the car, watch this video.This is the best I think I have ever seen
Thanks! Appreciate it!
Great video.
Approved!
Thanks Paul!
This is fantastic, thank you!
Glad it was helpful to you!
Older video, very good explanation of installation on light switch and steering wheel, can tell you have patience, these parts don't always fit sometimes, a little extra work and everything turns out fine, great video,THANKS SUBSCRIBED
Patience is a “must” when working on a Model A. Things don’t always go as planned. Thanks for watching!
I am doing the same thing on a 1932 BB truck. You just saved me a lot of time and frustration as I am sure the rod and spider and clip work the same. THANK YOU FOR SHARING.
Absolutely! Hope it helps you. Good luck on your truck!
The view of the horseshoe retainer clip for the horn rod was exactly what I needed to figure out how to get the steering wheel off of a '37 Ford, they use the same setup down at the steering box. Thanks for posting this, very helpful.
I’m glad it was helpful to you. Good luck on your car!
This sure came in handy as I needed to fit the clip to the spider gear of my '31 Coupe just today.
Thanks for posting.
We’re glad you found it helpful. Thanks for watching!
Woohoo!
Thanks!
If you enjoy our videos or they have been helpful to you on your own Model A journey, please consider giving the video a thumbs up and subscribe to our channel. This will help youtube to share our future videos with you. Thanks for watching and joining us on our journey.
Good video. Watching from Seguin Texas Thanks working on a 29 Pickup
Thanks for watching! Glad you enjoyed it!
Thank you for sharing, that will come in handy one day.
Thanks. Glad to hear that it is helpful to you.
Followed your video today to replace my spider and everything went back together great. I also replaced the oil tube and gasket and the only discovery was the steering wheel rod would not come all the way out of my sport coupe as it made contact with the roof but that was enough clearance for me to get the oil tube back up into the steering box and then push the steering rod back through it. Thanks for your video!
Great! Glad we were able to help. Thanks for watching.
Informative! Last year I needed to replace my horn rod on my Victoria. I got it from Snyder’s. When I went to install it, it wouldn’t slide down the tube! It was too large in diameter! I called the vender, they said it was the proper part, but the way the rod was made they said I needed to sand the whole length of the rod! They said it was normal to do this! I took emery cloth and sanded the rod until it slid down the column. Where did you get your horn rod?
We got ours from Snyder’s too. The only real hang up we had was with the price/ID sticker on it. Our first time putting it in the shaft, it got hung up on that. Once we removed that, although a tight fit, it went on. Maybe the filing we did on the end of the rod for the spider made ours go on better? Not sure. It was definitely more work to put that all together than we thought it would be though.
That’s odd that you didn’t have that tight fit on the rod. I had to sand the whole length of that rod!
@@fredkaminski3668 I’m glad you posted about it though. If someone else has that issue, and they check the comments here, they will know what to do to make it work. Thanks for watching and commenting!
That was a reproduction spider part and not an original, so required some modification work !!!
Yup. It’s getting harder to find those original parts. Gotta make those reproductions work when you need them. Thanks for watching.
Does the horn rod push against the lights switch to ground the horn wiring at switch or does it carry the circuit up the shaft to ground at steering wheel.
There is a wire up through the center of the rod to the horn switch which when pressed closes the circuit and the power goes back down the horn rod which is grounded at that “C” clip. The center wire up the horn shaft internal wire makes contact down at the bottom inside the whole light switch for power.
What snapped into place @ 15:38?
From reviewing the video myself just now, I think something was set down or fell down in the background at that specific time stamp. Nothing to do with the car. If you are asking about what George clipped just prior to that point, he snapped the light switch bale into place on the light switch body at the bottom of the steering column.