Every time you tell us more about these cabinets the more impressive they become. The thinking about the feet height and the bolt holes and the drawer rails is so clever!
Can't get enough of this series. Bought the plans, just waiting for the shop to warm up. This should get my shop in organized fashion, FINALLY. Thanks Jer!
I really like the approach of starting super simple with the wedge. I’ve seen all kinds of way-too-complicated / unstable solutions to the mobile-cart-immobilization problem. Yeah, the wedge doesn’t *look* as well planned as a complicated solution, but it actually *is*.
I have a work table that I've really been wanting to make some leveling feet for , but because of the legs I havent been sure how I want to go about making them. This gave me a pretty good idea how I want to make my own !
Hi Jer, great to see you making content again, fantastic system as always......I was watching this video and it reminded me of another TH-camr (can't for the life of me remember who....think he was fitting wooden knobs to machine screws and nuts - could be Sean Kamki "Hex Chisel, Hex Hole, Removable Hex Nut Handle") but they modified a coupling nut into a chisel to cut form fitted nut recess in timber....They used a large drill bit (larger than the corner dimension of the nut - Sean used a step drill and a dremel) to cut a concave dish out of one end the the nut this forms a sharp bevel to outside face of the nut which can be now used as a hexagon chisel (hardened/tempered with a gas torch). just have to drill the spanner sized hole in the receiving timber then hammer the modified chisel coupling bolt (add a decent bolt and lock nut for ease of use and retrieval) to remove the minimal material left ....... and presto.......you have a perfectly sized nut shaped hole for your nut to fit with minimal glue up required and if at all. Just though it might be a good technique to employ, cheers
Very talented engineering, and proficient with wood and metal working tools. Killer instructions are more professional than actual products info on items in the stores. Awesome, man !
It’s an acknowledgment of not just this video, but an accumulation of all his content. Sometimes it’s nice to give people compliments and acknowledge their time and energy into creating content at such detail while taking the viewers along for the ride. You make content Queef? (Damn that autocorrect). Or are you just into the fine art of comment trolling? Friends of which are a dime a dozen.
@@Qwiv go through this guy's back catalog. He's really done some great problem solving and designs and starting at quite a young age. As an engineer I've always been pretty impressed and enjoyed his stuff. However.... I might not be the best judge considering I can barely dress myself.... But I do work with electronics, photonics, and metrology equipment everyday and haven't had any embarrassing Us in quite a while. Must be a few weeks now.
Very well done. Always in search of the “perfect” caster/leveling feet. Only issue I see with the wedge is movement across floors with expansion cracks, cords or even pieces of debris.
New viewer and subscriber to your channel. The amount of thought you've put into this system blows me away. Next time I hit up the lumber yard I will definitely be picking up a few extra sheets of Baltic Birch and also buying your plans. Incredible work!
He is a madman selling his plan for this cabinet for only $12... I recently discovered his channel and subscribed because the cabinet just sold my soul away 😆. I love the fact that it's all modular, and as a guy who loves modular stuff (modular toys, model kits, tools), it was a no-brainer to buy his plan the moment I saw it
I really like all the builds you’ve done. The amont of ingeniering is impressive, all the details have a purpose altough in the build or the method of building it. Sorry for my english i’m rusty 😢
Wow, I was feeling super-bummed that an evil gnome hath barricaded my workshop (which inexplicably has glass walls) these past two years, but stumbled upon my top three favourite Jer Videos (the concrete workbench, the 45 drawers, and one of the lumber storage projects from back in the day) this morn and felt compelled to check if you’d released any videos of late; was so delighted that I began to weep, lol. I pray things are well with you and yours and can’t wait to watch all the videos I’ve missed. Brightest of blessings to you from Sally B. 🙏
So many things to build as I setup my new shop. I'm thinking that these cabinets are going to be a central part of the setup, as they tick most of my requirements and the timing of this design release was just about perfect.
around 5:57 when creating the blocks for the feet i was wondering why you didn't make them full length to mate on the flat surface of the mounting square the 2 small glue surfaces doesnt look like it would be able to hold all that much weight it might block one of the 4 mounting holes but you could keep a captive bolt in it or trim the end of the block so you could still get at the bolt hole great job as always!
Baltic birch plywood is a lot stronger than your run of the mill big box store plywood. Matthias Wandel did a series of videos comparing the strength of different plywood's and types of wood which is very informative.
I believe it’s strong enough as is. Wood glue and hardwood is surprisingly strong. But yeah the other option would be slimming it down to clear the bolt (and a socket & ratchet) near the top. I didn’t want to do a captive bolt because then I can’t slide a foot under an existing cabinet, unless I jack the cabinet up to clear that bolt.
2:39 a super easy "riser" that you could make that would leave the foot and wheel as they are (with a very small modification) would be to glue a triangular prism on the inner corner of the foot and then drill a hole and then thread it so that a rod can go through at an angle. Either placing a coin on the floor or giving the threaded rod a welded foot, would then allow a person, from the front via a slot in the threaded rod, to lift the two forward feet off the ground and thus immobilize the cabinet. Rear ones don't need that, tbh. I never use my rear wheel locks.
I’m interested in that type of caster. Seems well-suited for this, just need a wood block with to adapt the hole pattern and bring it to the right height.
What about combining the leveling with the caster feet: replacing the leveling nut for a kind of setting wheel big enough to dial in from aside . So there is no need to wedge - just turn the wheel.
Dear Jer, I enjoyed your video very much. Your cabinets are very elegant. Don't forget to send a copy of the plans to The Smithsonian. Best wishes, John
Really clean design, looks fantastic. Do you think a threaded insert or tee nut would work for these? Watching you install them, you wouldn't have to hold a washer and nut from below, and it could let you bolt into all 4 holes? Just a thought, again, this is amazing and will be part of my build when I move into a new shop.
I experimented with threaded inserts and T-nuts on my prototypes. But they’re more expensive than bolts & nuts, and that’s really adds up when you have a dozen cabinet modules & feet. And I liked the idea of using the same hardware for everything on this system.
So I’m curious, why use the couplers as the thread inserts for the leveling feet instead of the hammer-in tee nuts? I only ask because I just used the tee nuts on my bench with some carriage bolts. The level of detail you put into this is amazing!
I used tee nuts on my first prototype, and while it didn’t ever actually cause a problem, I felt that they weren’t as solid side-to-side as I wanted. Might have been ok if I epoxied them in.
Okay, road to one million subs. Make a few knives and another pen. Make a French cleat or variation of tool wall. Uhh.. probably make soup video once because why not. French onion? Then do a really snazzy workbench and you got it.
Wonderful work, Jer! As you did the "Matthias Table Test", would it not be a good idea to incorporate Matthias' preference for templates as well? Seems to be a lot of marking you did for the holes. I assume anyone building these cabinets will build more than 1 or 2. jm2c
Great work Jer! I was wondering how you stabilize the rollers to prevent the cabinets from moving around? Can they be made to be retractable? Just curious.....
Just saw you cutting out the plywood squares for the feet... Please seriously consider using a jig or other safety device when working with smaller items close to the blade, all it takes is a couple of milliseconds for a terrible injury to occur (maybe someone else already commented on this, I haven't read any of the comments yet and this is the second video of yours that I'm watching, the first was the recent one on attaching nuts inside of a steel tube - good tip and video, BTW)
Hey Jer, did you try combining the two versions? To put the leveling foot on the caster foot so you can roll it when you need to but lock it with the leveling feet rather than the wedge. I’m guessing the caster height makes this not a good option. But thought I’d ask
I mostly just didn’t want to be crawling around on the floor reaching under cabinets with a wrench to lower the feet. Tapping the wedge in is so much faster.
Thanks! In my experience, most locking casters don’t lock up very solidly, i.e. they can still wiggle a little. Using the wedges makes the cabinet more solid.
Quick question. The only thing holding the leveling feet is the sheer strength of the glue on that little piece you set them in. Have you run into any issues, or tested the load on that? Curious if someone built a 2-cabinet high, 4 wide platform, and filled it up with a lot of weight if that glue would hold all that up. Cheers.
Jer, do have diagrams for us to create our own feet or for your cabinets? I have been searching TH-cam for over two years for people who clearly know what they are doing, and you are one person I have faith in. You have made cabinets with amazing drawers and I would like to get the diagrams or plans from you. Please let me know. Thank you. My name is Peter
Do I understand correctly that the little corner blocks through which the tall nuts support the riser bolt are holding up the total load by just a glued connection to the sides? It seems I would consider making those corner block as tall as the inside corner so that there is a solid build from riser bolt to the base of the cabinet… would there be a reason not to that? (Hopefully I made myself a little bit clear on what I mean here 😅)
If the corner block was full height, it would block access to the bolt hole in that corner (for mounting to the cabinet). It would be possible to shape it with a thin part that would transfer that load but stay out of the way of the hole, but in my experience, wood glue is easily strong enough for this, so I figure it’s not worth the work.
Does the hole pattern work between the modules? So it would use 2 bolts from 1 and 2 bolts from the other and support the middle seam? Also these are great Jer, i love modular designs and plan on buying your plans to support this project
@@Jer_Schmidt so that means in the previous video where you put 4 boxes as coffee table in your office, you can attach 1 footing exactly at the center.
Have you found any suitable alternatives to baltic birch? The material for just one cabinet is close to $150 right now but it would have been only $50 based on pricing in the before times. Have you tried appleply or europly, both of which are supposed to be domestically sourced (US)?
Baltic birch prices are crazy right now, so I don’t expect these numbers to be relevant in the future. But based on local (PNW) prices right now, it’s around $90 for one cabinet and around $60 for four drawers (enough to fill one cabinet).
At first I thought it was me going crazy, so I rewatch the video to be sure. You actually did go back-and-forth between blonde and red hair five or six times...LOL
I might be missing something obvious but why not just use casters that you can lock? If you remove the actual "leg" there won't be any interference with the locking lever of the caster either.
I’ve never encountered casters that lock up securely. The best ones I’ve seen still have a little bit of wiggle or rock when they’re locked. This is just more solid.
@@Jer_Schmidt I agree that you need quality casters but I've managed to find casters that lock up well enough for it to work. This is in Sweden though so I don't think a product recommendation would be useful. :) Also, considering the simplicity and ease of manufacturing using locking casters it might just be worth sacrificing some rigidity.
Watching your OCD on those legs gives me an odd feeling, but I can't nit watch, ha ha. Trimming the heights, yes, virtually essential. Trimming the corners rather than near enough, OCD for sure :-) beautiful work as always. PS, you could index those castors to the outside on both axes for ultimate stability. But I know why you don't even entertain it on camera: it's a system not a single cabinet and that would preclude side by side use.
Great to see you back and making videos. Whether you stick around long-term or not.... It's great to see you enjoying your work.
Hey-- why are you giving him an option? Ye shall stayeth.
Every time you tell us more about these cabinets the more impressive they become. The thinking about the feet height and the bolt holes and the drawer rails is so clever!
I really enjoy and appreciate the precision. I would love to see a video dedicated to measurement and jigging techniques. Very impressive!
Functionally elegant. Well done sir. And your belt grinder is still the best on the web…
The caster feet is a project I've wanted to do for a while for a few pieces. Very good solution!
Can't get enough of this series. Bought the plans, just waiting for the shop to warm up. This should get my shop in organized fashion, FINALLY. Thanks Jer!
I'll never build these, still watching every video. Amazing detail and thought.
I really appreciate the extra care and attention to detail you bring to all your projects.
this whole cabinet concept blows my mind. THANK YOU JER SCHMIDT
Just like your Gen 2 build you’ve left no stone unturned. Brilliant work once again
I really like the approach of starting super simple with the wedge. I’ve seen all kinds of way-too-complicated / unstable solutions to the mobile-cart-immobilization problem. Yeah, the wedge doesn’t *look* as well planned as a complicated solution, but it actually *is*.
Always enjoy watching you create. Thanks for sharing. Cheers from Australia.
I learn clever new tricks every time you drop a new video. Now is just need to get to the shop and actually use them.
Thanks for doing what you do.
Brilliant! Your attention to detail always brings such joy to my day.
I'm absolutely amazed about how well thought out your projects are!
I have a work table that I've really been wanting to make some leveling feet for , but because of the legs I havent been sure how I want to go about making them.
This gave me a pretty good idea how I want to make my own !
Hi Jer, great to see you making content again, fantastic system as always......I was watching this video and it reminded me of another TH-camr (can't for the life of me remember who....think he was fitting wooden knobs to machine screws and nuts - could be Sean Kamki "Hex Chisel, Hex Hole, Removable Hex Nut Handle") but they modified a coupling nut into a chisel to cut form fitted nut recess in timber....They used a large drill bit (larger than the corner dimension of the nut - Sean used a step drill and a dremel) to cut a concave dish out of one end the the nut this forms a sharp bevel to outside face of the nut which can be now used as a hexagon chisel (hardened/tempered with a gas torch). just have to drill the spanner sized hole in the receiving timber then hammer the modified chisel coupling bolt (add a decent bolt and lock nut for ease of use and retrieval) to remove the minimal material left ....... and presto.......you have a perfectly sized nut shaped hole for your nut to fit with minimal glue up required and if at all. Just though it might be a good technique to employ, cheers
I like that wedge/caster idea. Very cool.
Very talented engineering, and proficient with wood and metal working tools. Killer instructions are more professional than actual products info on items in the stores. Awesome, man !
Really satisfying to see such nice design and finishes!
You are aware that you are one of the most brilliant minds of our time right? I’m in awe of your thought process
Really, that’s all it takes……. You need smarter friends.
It’s an acknowledgment of not just this video, but an accumulation of all his content. Sometimes it’s nice to give people compliments and acknowledge their time and energy into creating content at such detail while taking the viewers along for the ride. You make content Queef? (Damn that autocorrect). Or are you just into the fine art of comment trolling? Friends of which are a dime a dozen.
@@Qwiv go through this guy's back catalog. He's really done some great problem solving and designs and starting at quite a young age. As an engineer I've always been pretty impressed and enjoyed his stuff.
However.... I might not be the best judge considering I can barely dress myself....
But I do work with electronics, photonics, and metrology equipment everyday and haven't had any embarrassing Us in quite a while. Must be a few weeks now.
@@stephborel no disrespect to him. the stuff he makes is awesome…. But MOST BRILLIANT MIND OF OUR TIME….. come on.
@@Qwiv dude I’m not Time magazine lol it’ll be ok. You’re brilliant too.. don’t feel left out.. I got enough compliments to go around..
Very well done. Always in search of the “perfect” caster/leveling feet. Only issue I see with the wedge is movement across floors with expansion cracks, cords or even pieces of debris.
Just found your channel and its amazing. I generally have a hard time becoming interested in most content but im devouring your videos.
Great work on these drawers Jer! Love the plans, can tell a lot of effort and thought went into them. Look forward to building!
New viewer and subscriber to your channel. The amount of thought you've put into this system blows me away. Next time I hit up the lumber yard I will definitely be picking up a few extra sheets of Baltic Birch and also buying your plans. Incredible work!
Wait till you go back and watch the grinder videos. Jer is a legit genius
mantap mas bro
Ther's a very satisfying degree of OCD involved in this design. Symmettrryy FTW!! 😆
He is a madman selling his plan for this cabinet for only $12...
I recently discovered his channel and subscribed because the cabinet just sold my soul away 😆. I love the fact that it's all modular, and as a guy who loves modular stuff (modular toys, model kits, tools), it was a no-brainer to buy his plan the moment I saw it
I really like all the builds you’ve done. The amont of ingeniering is impressive, all the details have a purpose altough in the build or the method of building it.
Sorry for my english i’m rusty 😢
This whole system seems great. I'm not a CNC guy, but the level of accuracy needed on these components seems like it would be a great CNC project.
Wow, I was feeling super-bummed that an evil gnome hath barricaded my workshop (which inexplicably has glass walls) these past two years, but stumbled upon my top three favourite Jer Videos (the concrete workbench, the 45 drawers, and one of the lumber storage projects from back in the day) this morn and felt compelled to check if you’d released any videos of late; was so delighted that I began to weep, lol. I pray things are well with you and yours and can’t wait to watch all the videos I’ve missed. Brightest of blessings to you from Sally B. 🙏
So many things to build as I setup my new shop.
I'm thinking that these cabinets are going to be a central part of the setup, as they tick most of my requirements and the timing of this design release was just about perfect.
killer realisation and design, like usual ! Well done !
Incredibly well thought out! Well done!
Excellent, as always. I don't have a spot for these, but want to buy the plans in case a friend needs some built.
Hi, I would definitely be interested in what you might come up with for a retractable caster. Keep up the good work 👍.
Jer Schmidt is the new Matthias Wandel -- love this channel
around 5:57 when creating the blocks for the feet i was wondering why you didn't make them full length to mate on the flat surface of the mounting square
the 2 small glue surfaces doesnt look like it would be able to hold all that much weight
it might block one of the 4 mounting holes but you could keep a captive bolt in it or trim the end of the block so you could still get at the bolt hole
great job as always!
Baltic birch plywood is a lot stronger than your run of the mill big box store plywood. Matthias Wandel did a series of videos comparing the strength of different plywood's and types of wood which is very informative.
I believe it’s strong enough as is. Wood glue and hardwood is surprisingly strong. But yeah the other option would be slimming it down to clear the bolt (and a socket & ratchet) near the top. I didn’t want to do a captive bolt because then I can’t slide a foot under an existing cabinet, unless I jack the cabinet up to clear that bolt.
Brilliant, Jer! Really fantastic work! 😃
Stay safe there with your family! 🖖😊
Awesome cabinets & feet Jer, thank you!
Brilliant! So genius, and yet so simple. Thanks for sharing!
Love the Matthias test! 👍
I like the concentric hole drilling technique!
2:39 a super easy "riser" that you could make that would leave the foot and wheel as they are (with a very small modification) would be to glue a triangular prism on the inner corner of the foot and then drill a hole and then thread it so that a rod can go through at an angle. Either placing a coin on the floor or giving the threaded rod a welded foot, would then allow a person, from the front via a slot in the threaded rod, to lift the two forward feet off the ground and thus immobilize the cabinet. Rear ones don't need that, tbh. I never use my rear wheel locks.
I bought the plan, this is a well thought plan. I'm looking at using GD-40F caster wheels on my build.
I’m interested in that type of caster. Seems well-suited for this, just need a wood block with to adapt the hole pattern and bring it to the right height.
What about combining the leveling with the caster feet: replacing the leveling nut for a kind of setting wheel big enough to dial in from aside . So there is no need to wedge - just turn the wheel.
Dear Jer, I enjoyed your video very much. Your cabinets are very elegant. Don't forget to send a copy of the plans to The Smithsonian. Best wishes, John
Always enjoy your videos, thanks for sharing!
Brilliant and very inspiring! Thanks for sharing.
I like how the hair color changes during shots,
Really nice work though 👏
Love your builds. Love your presentation,, ⭐
Cheers from Sweden,, 🍻😎👍👍
I'm glad you're back bro
I always look forward to seeing your vids. 😀
Really clean design, looks fantastic.
Do you think a threaded insert or tee nut would work for these? Watching you install them, you wouldn't have to hold a washer and nut from below, and it could let you bolt into all 4 holes? Just a thought, again, this is amazing and will be part of my build when I move into a new shop.
I experimented with threaded inserts and T-nuts on my prototypes. But they’re more expensive than bolts & nuts, and that’s really adds up when you have a dozen cabinet modules & feet. And I liked the idea of using the same hardware for everything on this system.
Good stuff Jer
Looks good Jer
Matthias Wandel Jr. 🤔 Great videos 😊👍
So I’m curious, why use the couplers as the thread inserts for the leveling feet instead of the hammer-in tee nuts? I only ask because I just used the tee nuts on my bench with some carriage bolts. The level of detail you put into this is amazing!
I used tee nuts on my first prototype, and while it didn’t ever actually cause a problem, I felt that they weren’t as solid side-to-side as I wanted. Might have been ok if I epoxied them in.
Amazing system, very impressive!
Okay, road to one million subs. Make a few knives and another pen. Make a French cleat or variation of tool wall. Uhh.. probably make soup video once because why not. French onion? Then do a really snazzy workbench and you got it.
Great series Jer!
Super video. Excellent design, engineering and fabrication! Mahalo for sharing! : )
It’s still hard to believe that you didn’t use a CNC to build these. Seriously cool design and implementation.
The mean Mathias test is impressively
"I lost footage of that cut, but here's roughly how it went"
You spoil us Jer
Wonderful work, Jer!
As you did the "Matthias Table Test", would it not be a good idea to incorporate Matthias' preference for templates as well? Seems to be a lot of marking you did for the holes. I assume anyone building these cabinets will build more than 1 or 2.
jm2c
I do think it’s worth making a permanent (mdf/hardboard) template for all the holes in the cabinets. Not sure it’s worth it for the feet.
Great work Jer! I was wondering how you stabilize the rollers to prevent the cabinets from moving around? Can they be made to be retractable? Just curious.....
Jer you are a boss!
Just saw you cutting out the plywood squares for the feet...
Please seriously consider using a jig or other safety device when working with smaller items close to the blade, all it takes is a couple of milliseconds for a terrible injury to occur (maybe someone else already commented on this, I haven't read any of the comments yet and this is the second video of yours that I'm watching, the first was the recent one on attaching nuts inside of a steel tube - good tip and video, BTW)
I snorted when you were "testing" the cabinets 🤣
Hell of a job! What’s next? A wall mount version?
Hey Jer, did you try combining the two versions? To put the leveling foot on the caster foot so you can roll it when you need to but lock it with the leveling feet rather than the wedge. I’m guessing the caster height makes this not a good option. But thought I’d ask
I mostly just didn’t want to be crawling around on the floor reaching under cabinets with a wrench to lower the feet. Tapping the wedge in is so much faster.
I love what your doing with these cabinets! Q: What stopped you from using locking casters?
Thanks! In my experience, most locking casters don’t lock up very solidly, i.e. they can still wiggle a little. Using the wedges makes the cabinet more solid.
Quick question. The only thing holding the leveling feet is the sheer strength of the glue on that little piece you set them in. Have you run into any issues, or tested the load on that? Curious if someone built a 2-cabinet high, 4 wide platform, and filled it up with a lot of weight if that glue would hold all that up. Cheers.
Jer, do have diagrams for us to create our own feet or for your cabinets? I have been searching TH-cam for over two years for people who clearly know what they are doing, and you are one person I have faith in. You have made cabinets with amazing drawers and I would like to get the diagrams or plans from you. Please let me know. Thank you. My name is Peter
Check the video description?
Yes.
Plans for the feet: jerswoodshop.com/cabinet-feet/
Plans for the cabinets: jerswoodshop.com/cabinet-system/
Excellent.
Do I understand correctly that the little corner blocks through which the tall nuts support the riser bolt are holding up the total load by just a glued connection to the sides? It seems I would consider making those corner block as tall as the inside corner so that there is a solid build from riser bolt to the base of the cabinet… would there be a reason not to that? (Hopefully I made myself a little bit clear on what I mean here 😅)
If the corner block was full height, it would block access to the bolt hole in that corner (for mounting to the cabinet). It would be possible to shape it with a thin part that would transfer that load but stay out of the way of the hole, but in my experience, wood glue is easily strong enough for this, so I figure it’s not worth the work.
Great video, love your system!
I suppose that I can tap in the leveling wedges from underneath the carcass so that I don’t accidentally kick them out.
oh my god, I was telling my father about this build a couple weeks ago and just couldn't remember the channel name and this pops up
Does the hole pattern work between the modules? So it would use 2 bolts from 1 and 2 bolts from the other and support the middle seam?
Also these are great Jer, i love modular designs and plan on buying your plans to support this project
Yes! Ah I wish I would have pointed that out in the video.
@@Jer_Schmidt so that means in the previous video where you put 4 boxes as coffee table in your office, you can attach 1 footing exactly at the center.
@@redensantos7210
Not sure why I’d do that, but yes, the holes would line up.
@@Jer_Schmidt "Not sure why I’d do that" FOR SCIENCE!!!!
Have you found any suitable alternatives to baltic birch? The material for just one cabinet is close to $150 right now but it would have been only $50 based on pricing in the before times. Have you tried appleply or europly, both of which are supposed to be domestically sourced (US)?
I haven’t tried any alternatives. My local wood source sells Appleply, and it looks great, but it’s waaay more expensive than Baltic birch, even now.
Well thought out! RWB ❤🎉
is it me or have you started using metric measuremnts more? I remember from the belt grinder series it was mostly imperial
I use metric as much as possible, but since I live in the US, it’s often impossible to find metric materials, so I’m forced to use inches.
Thanks!
Do you have an idea of the cost breakdown per cabinet? I'm wondering if it would be cheaper to build vs buy
Baltic birch prices are crazy right now, so I don’t expect these numbers to be relevant in the future. But based on local (PNW) prices right now, it’s around $90 for one cabinet and around $60 for four drawers (enough to fill one cabinet).
Geart Job ! which type of plywood do you use ?
I love the bird seed fish bait analogy
Your absolutely amazing
At first I thought it was me going crazy, so I rewatch the video to be sure. You actually did go back-and-forth between blonde and red hair five or six times...LOL
Haha yeah, I filmed the build several months ago, but then did the intro, outro, etc within the last week
@@Jer_Schmidt I was so glad to see you back after your long absence. You are very creative and do excellent work. Thanks for all your videos.
Thank you jeremias
Hello, I follow your channel very well.! So beautiful. But you're thinner these days than in previous years. Good luck
I might be missing something obvious but why not just use casters that you can lock? If you remove the actual "leg" there won't be any interference with the locking lever of the caster either.
I’ve never encountered casters that lock up securely. The best ones I’ve seen still have a little bit of wiggle or rock when they’re locked. This is just more solid.
@@Jer_Schmidt I agree that you need quality casters but I've managed to find casters that lock up well enough for it to work. This is in Sweden though so I don't think a product recommendation would be useful. :)
Also, considering the simplicity and ease of manufacturing using locking casters it might just be worth sacrificing some rigidity.
Just turn the leg inside to maximize toe kick space, exactly like kitchen units in a kitchen, they’re perfectly stable
If I make this, do I need to change my hair color in the middle of the build?
Preferably at least four times, yes.
The Matthias Test 🥰
👍👍👍 Thank you
It's cool watching someone learn common sense.
I legitimately laughed out loud @ 5:48
Gotta make it work with what I have haha
When he was testing the stability of the table it reminded me of napoleon dynamite
You should call it the Jertainer.
Can't tell, maybe my concern for your fingers may be misplaced if that's a "Saw stop" brand table saw
at the risk of repeating what others have already written, put those leveling feet on the caster feet.
Watching your OCD on those legs gives me an odd feeling, but I can't nit watch, ha ha. Trimming the heights, yes, virtually essential. Trimming the corners rather than near enough, OCD for sure :-) beautiful work as always. PS, you could index those castors to the outside on both axes for ultimate stability. But I know why you don't even entertain it on camera: it's a system not a single cabinet and that would preclude side by side use.