@mightywookiee6633 It doesn't look like they'll work together - not without some workbench engineering. With the cost of both pieces, there's some potential for an expensive 'oops'.
It appears as though the RxArms If you look at the standard rail on the M4 extends out from the rail… The MI Rail hugs and is snug against the barrel. I think they’ll work together.
@DeltaBravoOpr8r The MI handguard doesn't physically touch the barrel. There's about an eighth inch gap (maybe a little less) . I don't have mine right in front of me at the moment.
Hey rxarms, currently rocking the ti charging handle and mag cap along with the 6 position stock tube which have all been great with fit and finish. Unrelated to this product but will you be re releasing the full magazine tube ?
Yeah, I want this bad, but I love my MI handguard. I have a bunch of other stuff from y'all but I need a heat shield that'll work with the MI handguard
@@palijim mil spec picatinny rail, integrated cowitness ready RMR, cowitness ready aimpoint T2, cowitness ready Acro P2. For now those are all I'll be doing. Aimpoint will be coming in 2025, RMR and picatinny will be available this fall with the heat shield.
This mod just retired the Gen 2 model M1014 and the Midwest Industries handguard. Probably pissed off Benelli too lol. I'm looking forward to buying this.
@@victory5783 for us, the thumb locks in pretty good into an mlok slot. But we're open to making other attachments for it, you can email us about it, contact details are on our website.
Dumb question: currently have IWC light mount, will i still be able to use that with the heat shield? Also, have you tested to see how hot the heat shield can get?
I do not have that light mount to test, but I suspect it will not fit. As for heat, I have gotten it hot enough to make the handguard uncomfortable to hold, but the top was completely fine.
Just ordered an m4. This will be the first upgrade i will want to do. Is there any way to contact you about how some of the upgrades work? i want to do a few other upgrades, but I don't want to buy stuff i can't install
Hey Rob I already got your titanium magazine cap. Can I get some money back or something like that if you keep it or whichever one works best or maybe I have to sell the one I have I don't know?? I'm so bloody excited for this..😂❤
Thanks for the reply. We never intended to have a purpose built magazine cap be part of the heat shield assembly, but it ended up being the final missing piece of the puzzle. Unfortunately I can't go backwards on previous sales of our Ti mag cap, it is still an amazing cap for SBS shotguns, and also those who are not wanting the heatshield. The heat shield package includes helicopter tape as shown on the video here.
It is more complicated than just the handguard, the heat shield is designed for the dimensions of the benelli M4 barrel specifications as well. I am not sure if clones will work, nor are they guaranteed to fit.
Been on the Wait List since the beginning if the year ! The Anticipation is Killin' Me !
Well your wait is over. Back in stock. Regular and blemish $299 and $249 respectively.
Been waiting forever for this bad boy to drop! So excited. Take my money!
The M1014 is going to get a lot more use fighting drones in WW3. This part will come in handy.
Exactly! So much footage of semi auto shotguns shooting down drones
I love it! I also love my Midwest Industries handguard, though. I want both, but something is going to have to get trimmed.
I have the MI handguard as well and I was trying to figure out if it'd be compatible in some way...
@mightywookiee6633 It doesn't look like they'll work together - not without some workbench engineering. With the cost of both pieces, there's some potential for an expensive 'oops'.
It appears as though the RxArms If you look at the standard rail on the M4 extends out from the rail… The MI Rail hugs and is snug against the barrel. I think they’ll work together.
@DeltaBravoOpr8r The MI handguard doesn't physically touch the barrel. There's about an eighth inch gap (maybe a little less) . I don't have mine right in front of me at the moment.
That is a slick setup.
If you ever get around to an entry model, got at least x2 interested
Looks like a great product. Unfortunately I own an M2 😅
Hey rxarms, currently rocking the ti charging handle and mag cap along with the 6 position stock tube which have all been great with fit and finish. Unrelated to this product but will you be re releasing the full magazine tube ?
@@LivinTheDream3333 right now the full mag tube is back burner but perhaps in the future.
Can a MI Modular MLOK Rail Hand guard also fit in with this heat shield ?
Yeah, I want this bad, but I love my MI handguard. I have a bunch of other stuff from y'all but I need a heat shield that'll work with the MI handguard
Can you please break down what each of the optic mounts are that you are selling to fit the Benelli M4 Handguard Compatible M-LOK® Heat Shield?
@@palijim mil spec picatinny rail, integrated cowitness ready RMR, cowitness ready aimpoint T2, cowitness ready Acro P2. For now those are all I'll be doing. Aimpoint will be coming in 2025, RMR and picatinny will be available this fall with the heat shield.
@@rxarms Thank you, Picatinny please.
Any update on delivery time?
It's beautiful....
Does anyone know if this fits on the Panzer M4?
I hate the plastic handguards on the M4. I would LOVE a slimmed down, M-Lok handguard compatible with this heat shield.
This mod just retired the Gen 2 model M1014 and the Midwest Industries handguard. Probably pissed off Benelli too lol. I'm looking forward to buying this.
Can you make an M-Lok gas pedal (thumb rest) for the sides?
@@victory5783 for us, the thumb locks in pretty good into an mlok slot. But we're open to making other attachments for it, you can email us about it, contact details are on our website.
Will this work with Agency arms hand guard???
@@MrRandyRoc I don't know, the dimensions would need to match the OEM handguard.
Looks awesome. What’s the weight?
Dumb question: currently have IWC light mount, will i still be able to use that with the heat shield?
Also, have you tested to see how hot the heat shield can get?
I do not have that light mount to test, but I suspect it will not fit.
As for heat, I have gotten it hot enough to make the handguard uncomfortable to hold, but the top was completely fine.
How is production going?
Looking like Nov at this point.
When will this be shipping?
@@lukegulbranson9738 fall 2024
Shut up and take my money haha!
Just ordered an m4. This will be the first upgrade i will want to do. Is there any way to contact you about how some of the upgrades work? i want to do a few other upgrades, but I don't want to buy stuff i can't install
@@franciscogalindo8106 yes please visit our website for contact details. Thanks!
@@rxarms thank you
When is this getting released?
@@DeltaBravoOpr8r probably October/November 2024.
You should also contract this part to the Marine Corps.
Hey Rob I already got your titanium magazine cap. Can I get some money back or something like that if you keep it or whichever one works best or maybe I have to sell the one I have I don't know?? I'm so bloody excited for this..😂❤
Maybe you could include a chunk of helicopter tape too with a package
Thanks for the reply. We never intended to have a purpose built magazine cap be part of the heat shield assembly, but it ended up being the final missing piece of the puzzle.
Unfortunately I can't go backwards on previous sales of our Ti mag cap, it is still an amazing cap for SBS shotguns, and also those who are not wanting the heatshield.
The heat shield package includes helicopter tape as shown on the video here.
Is it just to look cool?
The main purpose is to utilize the M-LOK slots for a attachments...
Can i throw this on one of those turkshit clones? I imagine the wood furniture is dimensionally similar to the standard handguard.
It is more complicated than just the handguard, the heat shield is designed for the dimensions of the benelli M4 barrel specifications as well. I am not sure if clones will work, nor are they guaranteed to fit.
@@rxarms So should i use the big or the little hammer?
Any love for Mossberg in the future?
@@Dlewis77777 the 590 platform is on my list, since it is pre tapped receiver from factory. But over a year away at least.
Shyann Expressway
Ok
300 dollars is crazy. Then you have to spend another 200 dollars on a scope rail. No thanks!
@@LosDoyerss titanium ain't cheap, neither is precision machining.
Honestly looks bad on the M4.. Epic fail