"The Key Parts of a Booster Pump Explained" | Water Supply Pump | Pump Room | MEP | Installation

A domestic water booster pump is used to increase the pressure and flow rate of water from a low-pressure source, such as a well or municipal supply, to a higher-pressure destination, such as a shower head or faucet. The pump works by using an electric motor to drive an impeller that pushes water through a pressure tank and out to the destination.
The pressure tank helps to maintain a consistent flow rate and pressure by storing a reserve of water that can be quickly delivered to the destination as needed. The pump also typically has a pressure switch that turns the motor on and off based on the pressure of the water in the system, ensuring that the desired pressure is maintained.

[@muhammedmusthafa6213]

This is horizontal single stage flexible coupled end suction pump

[@paelojustinianoibarra1743]

correct me if im wrong i guest you need isolation gate valve connection from suction line for maintenance..

[@constructionhub-mep4660]

Of course, we need.. You're correct

[@a.m347]

Should be the flexible connection before the check valve on discharge header

[@lucasmabeth4876]

Can you show the Water Tank Transfer Pump?

[@constructionhub-mep4660]

Will make soon

[@anandjain6779]

There is pressure vessel near by the booster pump . what is the purpose of that ??

[@constructionhub-mep4660]

It will absorb the pressure during operation of the pump and it will keep the pressure as soon as the demand arises instead of starting the pump directly

[@krishnapal3741]

What is the difference between Vertical multi stage of pump and horizontal multi stage pump ??
Please

[@constructionhub-mep4660]

Shaft orientation will be vertical for vertical multistage pump whereas shaft orientation will be horizontal for horizontal multistage pump

[@omardhiflaoui2821]

what is the capacity of the pressure vessel used ?

[@constructionhub-mep4660]

300liters

[@agnimayabal8885]

👍

[@nomad7104]

How motor are there?

[@constructionhub-mep4660]

Motor is there.

[@alome6802]

I think concentric reducer at suction side is wrong should be eccentric reducer

[@constructionhub-mep4660]

Eccentric is only used at suction

[@omeryagz9875]

How can I contact with you?

[@constructionhub-mep4660]

[e-mail]

[@muhammedmusthafa6213]

This is not a vertical pump

[@a.m347]

Installation should be revised 😥

[@daleepkumardaleepkumar1593]

Sir es trah ka pump House me lgane ka kitna kharcha ata hai

[@constructionhub-mep4660]

With pressure vessel INR.20-25K. Without pressure vessel 15-18K.
Only for pump

[@mdakram5064]

Send nambar mobil

[@mdsaddamhussain4119]

Hindi hi bola English nahi ata hai jayda sans le kar mat bolo

[@constructionhub-mep4660]

Muje nahi bata

[@KHANBHAI-pc8my]

Bhai Hindi me hi bol le...

[@KHANBHAI-pc8my]

Nhi bol pate ho to...kam se kam Hindi me achhe bolne ka kosis kro

[@constructionhub-mep4660]

Karoonga