Hydrogen Generator test. How to adjust HHO amps without PWM. Water electrolysis. TORCH

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ม.ค. 2022
  • Thank you very much for your support and please continue to comment, like and subscribe. / fantotzyy .
    Hydrogen generator It consists of 13 316L stainless steel plates. 3 boards have contact plus and 2 minus. The gaskets have a size of 2 mm. I also used plexiglass, plugs, storms.
    For the experiment, electrolysis of water we used distilled water and potassium flakes (potassium hydroxide) and as electricity a 12V battery. Consume about 5-10 amps depending on the electrolyte.
    Of course we can use free energy from the sun and produce free hydrogen. We can use solar panels
    This generator does not separate hydrogen from oxygen so it does not produce pure hydrogen, pure oxygen.
    This hho putty can be used to save fuel on a car or any other internal combustion engine.
    It can save fuel up to 50%. I personally installed a hho putty on my vw Passat 1800T car and am very happy with the fuel economy. It's called the car that runs on water. Hydrogen generator installed on vw passat. Hydrogen installed on the machine.
    It can be used for other purposes. Cooking, cutting iron or other.
    It really is fuel made from water.
    You can make this generator yourself at home.
    Beware it is very dangerous Flammable and uncontrolled explodes.

ความคิดเห็น • 150

  • @Inventive101
    @Inventive101  2 ปีที่แล้ว +7

    Subscribe, like and comment .... next step 50k subscribers 🙏🙏🙏👉🏻

    • @antonioabellan_123
      @antonioabellan_123 2 ปีที่แล้ว +1

      Gracias🙏

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว +1

      @@antonioabellan_123 🙏

    • @actionkey8042
      @actionkey8042 2 ปีที่แล้ว +1

      AWESOME

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      @@actionkey8042 Thank you very much

    • @valentino10108
      @valentino10108 ปีที่แล้ว

      in locul placilor metalice trebuie sa folosest placi din grafit,studiile spun ca sunt cele mai performante si foarte rezistente pt electroliza. 😉

  • @constantinhuidu8869
    @constantinhuidu8869 2 ปีที่แล้ว +1

    O frumusețe de generator, pentru tine a început sa fie o arta un hobby foarte placut, tot respectul pentru ceace faci tu !

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Multumesc foarte mult! pcat ca nu mai prea am timp pt acest hobby, da imi place foarte mult

  • @Electronics61
    @Electronics61 ปีที่แล้ว +2

    Great video. I love your work

  • @venelibre5315
    @venelibre5315 2 ปีที่แล้ว +5

    Thank for sharing this with us 👍🏻👍🏻

  • @antonioabellan_123
    @antonioabellan_123 2 ปีที่แล้ว +3

    Como me gusta la pruebas que haces, y los generadores son estupendos, un saludo de España

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Muchas gracias buen amigo y partidario. Saludos desde Rumania.

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Salut prietene și multunesc mult

  • @luminitapricop2467
    @luminitapricop2467 2 ปีที่แล้ว +2

    Excelent...👏👏👏❤️

  • @khankhan-sg8zd
    @khankhan-sg8zd 2 ปีที่แล้ว +2

    Nice working👏👏👏👏👏👍

  • @01Autentic
    @01Autentic ปีที่แล้ว +1

    si acum imi tiuie o ureche de la un test cu un generator HHO, am 9ncercat sa pornesc un scuter de 50cmc, dar n,a mers pina la urma l,am pornit dar am obtinut H2 chimic nu prin electroliza, am pus alumiuniu intr,o solutie de soda caustica si se descompune degajind hidrogen masiv, nu se poate controla degajarea prea usor, apoi am schimbat si am pornit scuterul pe gaz propans,a incins motorul de am crezut c o sa se caleze da el s,a calit si a mers 3 ani fara reparatie

  • @stefanpricop4717
    @stefanpricop4717 2 ปีที่แล้ว

    Btavo foarte frumos

  • @monicapricop4655
    @monicapricop4655 2 ปีที่แล้ว +1

    Bravo😉

  • @alfredo-altamirano
    @alfredo-altamirano 2 ปีที่แล้ว +9

    Hydrogen master, I noticed you drilled a hole in your plate for the water flow. I was wondering if it makes sense to drill those hose on oposite side for each plate that way the water needs to travel along the entire plate. It might self clean and increase Hho production. Just a thought. What do you think?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว +1

      Hi, they need to be drilled for water to circulate. tell me what time to look maybe I didn't understand well.

  • @mushafhaider9208
    @mushafhaider9208 ปีที่แล้ว

    What you used as an electrolyte? What was the thickness of plates? Which type of Stainless steel plates you used?

  • @gabrielaplay5598
    @gabrielaplay5598 2 ปีที่แล้ว +2

    Super

  • @aaaqwe4111
    @aaaqwe4111 7 หลายเดือนก่อน

    Salut si felicitari. Incerc sa fac si eu montajul tau ca e profi si fain. Am rugamintea sa imi zici de unde ai cumparat supapa de siguranta si arzatorul. Multumesc anticipat

  • @globalengineer410
    @globalengineer410 2 ปีที่แล้ว +2

    Can you tell us more on the chip that adjust the air flow please where to put it, connect and how ?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว +1

      It connects to the obd 2 socket. It is very easy with the installation manual

  • @mlmdlsj
    @mlmdlsj 2 ปีที่แล้ว +1

    👍👍

  • @borisdabija873
    @borisdabija873 ปีที่แล้ว +2

    Salutare,
    Amice, am nevoie de ajutorul tău,
    In contextul crizei energetice din R. Moldova, caut și eu alternative pentru sursele energetice.
    Vreau sa-mi confecționez și eu un electrolizor pentru a alimenta un generator de 5 kw și un cazan pe gaz. Am nevoie de niște parametri de pornire,
    Îți mulțumesc anticipat

  • @Inventive101
    @Inventive101  2 ปีที่แล้ว +1

    🙏🙏🙏🙏

  • @anonymousnews3928
    @anonymousnews3928 2 ปีที่แล้ว +2

    💘

  • @joegood2474
    @joegood2474 ปีที่แล้ว

    Did you make the gaskets?

  • @stefanb.933
    @stefanb.933 3 หลายเดือนก่อน

    Salut.Sa inteleg ca de fapt la aceste "generatoare de hidrogen" ,oxigenul si hidrogenul se aduna in acelasi loc ? ...

  • @user-nk8jb5ct9n
    @user-nk8jb5ct9n ปีที่แล้ว

    Cu ce dispozitiv alimentezi electrolizorul?

  • @iskandarsyah9624
    @iskandarsyah9624 2 ปีที่แล้ว +2

    Nice contraption, can you produce the same amount of hydrogen per minute but 1/10th of the amps mentioned in 3:02?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว +1

      With a good electrical part set up you can believe, I think the electrical part is the most important for the production of advantageous hydrogen, I still have to work on this

    • @iskandarsyah9624
      @iskandarsyah9624 2 ปีที่แล้ว

      @@Inventive101 You might be interested on this method th-cam.com/video/KxZWUNC3fsg/w-d-xo.html

  • @sylver7574
    @sylver7574 ปีที่แล้ว

    pănă la urma ce avantaj ai daca pui asa ceva pe masină?

  • @bokmanhan9191
    @bokmanhan9191 ปีที่แล้ว

    Hi! Thanks for your video! Do you sell your kit?
    If so, how much?

  • @samuelvoicu
    @samuelvoicu 2 ปีที่แล้ว +2

    💪💪💪🙏🙏👍

  • @INFORMATIVEMANIA-ot6wu
    @INFORMATIVEMANIA-ot6wu ปีที่แล้ว

    what can we do heat up problem ?
    please tell i am facing too much

  • @user-pq4rf8qi8o
    @user-pq4rf8qi8o 2 หลายเดือนก่อน

    flashback arrester and torch???

  • @newtime4560
    @newtime4560 2 ปีที่แล้ว +4

    Please, can you tell me if you have modified the spark timing in the motor of your car? How have you made it? Thanks!

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      I used it on my car, I don't know if I synchronized but I also had a 40% saving. I used a chip to adjust the air flow

    • @newtime4560
      @newtime4560 2 ปีที่แล้ว

      @@Inventive101 where can I buy that chip?

    • @globalengineer410
      @globalengineer410 2 ปีที่แล้ว

      Can you tell us more on that chip please where to put , connect and how 🙏🏾

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      @@globalengineer410 It connects to the obd 2 socket. It is very easy with the installation manual

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      @@newtime4560 Volo performance

  • @chris01479
    @chris01479 2 ปีที่แล้ว +2

    Have you find a way to reduce the amps and volts?
    If so how many volts and amps do you use?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Well the amps I showed, 12V I use,

  • @scotthorton7786
    @scotthorton7786 ปีที่แล้ว

    Wires , generator, bubbler all getting way to hot. What do I do?

  • @kcirtap550
    @kcirtap550 2 ปีที่แล้ว

    hi! great video!
    where do you buy the rubber gasket please?

  • @marianbuduroi6463
    @marianbuduroi6463 2 ปีที่แล้ว +1

    Ce alte metale putem folosi că electrozi? Am monete de 2 și 5 cenți de zinc învelit în cupru pot fi bune?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Nu, nu sunt bune, o sa fac un video cu, aluminiu și cupru. Am făcut și o comparație cu alt inox decât cel 316L. Am un video

  • @waterfuel
    @waterfuel ปีที่แล้ว

    Hydrogen gas from common electrolysis is not HHO. A cell powered by special pulsing DC frequency current with duty cycle can form H+ H+ O -- - under certain condition which has higher energy content. This much earlier in time was called Browns gas, and 2 different people invented this.

  • @Inventive101
    @Inventive101  2 ปีที่แล้ว +2

    How about this test?

  • @shanestevens622
    @shanestevens622 4 หลายเดือนก่อน

    Not enough information on how it is powered, i have my plates all made, assembled and ready to power up but dont know what to use for power.

  • @user-nk8jb5ct9n
    @user-nk8jb5ct9n ปีที่แล้ว

    Are you using a PWM controller?

  • @jessvill4921
    @jessvill4921 2 ปีที่แล้ว

    Hello Sir, Where can i buy those steel plates, rubber gaskets and hose fittings? Many thanks

    • @Inventive101
      @Inventive101  ปีที่แล้ว

      Hi, I don't know where you can buy them in your country, where are you from?

  • @MrAnache
    @MrAnache 2 ปีที่แล้ว +1

    Buena fabricación 👍. Vendes ?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      No ho faig a la venda, però pots fer-ho tu mateix des dels meus vídeos

  • @1cent396
    @1cent396 ปีที่แล้ว

    Da cu apa normala nu merge?

  • @newtime4560
    @newtime4560 2 ปีที่แล้ว +3

    If you use this device in a car do you separate hydrogen from oxigen? In order to cheat the oxigen sensor? Thanks again

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      I don't separate the gases, hydrogen explodes better with oxygen. I used a chip for the sensors

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Did you see my video with the installation on my car?

    • @newtime4560
      @newtime4560 2 ปีที่แล้ว

      @@Inventive101 yes!

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      @@newtime4560 👍👍

  • @vahagnmelikyan2906
    @vahagnmelikyan2906 2 ปีที่แล้ว +1

    What insulator you use is that a gasket?

  • @mecaniclesofcostoboc4356
    @mecaniclesofcostoboc4356 2 ปีที่แล้ว +1

    Dacă cumpăr de la tine o celulă uscată ies mai ieftin decât la ăia de vând pentru maşini?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Dar eu nu vând, ieși mai ieftin dacă faci tu…

  • @khouchlaaablilah2631
    @khouchlaaablilah2631 2 ปีที่แล้ว +2

    Salut l ami. vouley vous vendre l appareil électrique d allmentation pour mon appareil. Merci

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Ce anume ai de vânzare?

  • @csarlindo
    @csarlindo 2 ปีที่แล้ว +2

    Massa = equivalente químico x corrente x tempo ÷ 96500 constante de Faraday
    M= 1 x 10 A. x 3600 s ÷ 96500
    M = 0.37 gramas por hora.
    O motor consome 4,5 kg/h (6 l/h) de combustível.

    • @rolo20102010
      @rolo20102010 2 ปีที่แล้ว +1

      Me surge una duda. Cómo se hace para pesarlo? ( 0.37 gramos por hora). Perdón por mi ignorancia...

    • @csarlindo
      @csarlindo 2 ปีที่แล้ว +2

      @@rolo20102010 .. a fórmula de eletroquímica define a massa de um elemento produzido como resultado da equação apresentada.
      Esta quantidade é por celula devendo ser multiplicado por 9 que são utilizadas na dispositivo construído.

    • @rolo20102010
      @rolo20102010 2 ปีที่แล้ว +1

      @@csarlindo Gracias por responderme. Podrías decirme por favor si los 0.37 gramos por hora son por placa o en total? y también quisiera saber si lo puedes expresar en litros por hora. Muchas gracias¡

  • @csarlindo
    @csarlindo 2 ปีที่แล้ว +1

    A concentração deve ser de 25% de Na OH.

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      I don't know how much I should be, I use potassium hydroxide and I put a little ....

  • @dominiquemuller8523
    @dominiquemuller8523 2 ปีที่แล้ว +1

    Bonjour là je m'adresse au consepteur du HHO serait-il possible de vous en commander un ? Cordialement

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Qui est le conseiller HHO ? je ne fais pas pour la vente

  • @fanicabeches2341
    @fanicabeches2341 7 หลายเดือนก่อน

    Cum te gasec sa mi faci si mie unul.

  • @mansonmason6119
    @mansonmason6119 2 ปีที่แล้ว +1

    What is type of power supply that you use?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      12 V battery

    • @mansonmason6119
      @mansonmason6119 2 ปีที่แล้ว

      And thats it ?? no dial to turn up the power,just straight 12v battery connection ?

  • @mushafhaider9208
    @mushafhaider9208 ปีที่แล้ว

    So How much HHO produced from one liter of water??

  • @valleyfood548
    @valleyfood548 2 ปีที่แล้ว

    Very long time I am watching your videos and second question is that how last that this hho generator works.

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      If you maintain it properly and in parameters quite a lot, I used about 5 ni on my own car

  • @lightkeeper2409
    @lightkeeper2409 ปีที่แล้ว

    Ai o pagina de Facebook unde te pot contacta?

  • @ioanflorincostea8738
    @ioanflorincostea8738 2 ปีที่แล้ว +1

    Salut probează cu ranuri de 2 milimetri pe fiecare placă crește mult producția.

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Salut, ce sunt “ranuri”? Mulțumesc

  • @jaimefloresalvarez1752
    @jaimefloresalvarez1752 2 ปีที่แล้ว +1

    Donde compras esas válvula de seguridad o donde la puedo conseguir

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Busque en Internet la válvula de seguridad
      para acetileno

    • @jaimefloresalvarez1752
      @jaimefloresalvarez1752 2 ปีที่แล้ว

      @@Inventive101 y es efectivo una válvula para acetileno ?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      @@jaimefloresalvarez1752 A baja presión sí es eficiente y una de oxígeno. Yo uso acetilib

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      @@jaimefloresalvarez1752 Aprobado por mí hasta 10 bar. ¿Para qué lo quieres usar?

    • @jaimefloresalvarez1752
      @jaimefloresalvarez1752 2 ปีที่แล้ว

      @@Inventive101 voy hacer las pruebas

  • @patrickpalacio2047
    @patrickpalacio2047 2 ปีที่แล้ว +1

    Do you ever sell anything? Please let me know. I made one, but the output is not good. I don't have the tools to make one that is of good quality.

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Hi, I'm sorry but I'm not selling them, where are you from?

    • @patrickpalacio2047
      @patrickpalacio2047 2 ปีที่แล้ว

      @@Inventive101 Los Angeles. And you? You are very talented. I am envious of your builds. In a good way that is.

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      @@patrickpalacio2047 Thank you very much. greetings from Romania

    • @rezashayeste3646
      @rezashayeste3646 หลายเดือนก่อน

      سلام من رضا از ایران ۳سال پیش من این راکتور را ساختم الان در اتومبیل استفاده میکنم

  • @ciprianmustata9199
    @ciprianmustata9199 2 ปีที่แล้ว +1

    Un telefon ptr contact?? Ma interesează o instalatie

  • @khankhan-sg8zd
    @khankhan-sg8zd 2 ปีที่แล้ว +1

    Hi sir why did not come on TH-cam? Are you OK?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Hi, yes I'm fine, thanks! I was very busy with a new project

  • @chutumurmu5129
    @chutumurmu5129 2 ปีที่แล้ว +1

    Please make this machine in big form

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      What size are you thinking about?

    • @chutumurmu5129
      @chutumurmu5129 2 ปีที่แล้ว

      @@Inventive101 At least those who can produce 100 kg in a day.

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      @@chutumurmu5129 It's done, how much are you willing to invest in it?

    • @rolo20102010
      @rolo20102010 2 ปีที่แล้ว

      @@chutumurmu5129 Estoy intrigado cómo hacen para pesar un gas?

  • @tanveeraslam2382
    @tanveeraslam2382 2 ปีที่แล้ว

    good jod amps less ido this project in 2017 butt so many amps

  • @chutumurmu5129
    @chutumurmu5129 2 ปีที่แล้ว +1

    How much KG of hydrogen can this machine produce in a day?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      About 60 liters per hour I think

  • @bambangsetiawan2241
    @bambangsetiawan2241 ปีที่แล้ว

    Saudara berapa tebal plat yang anda gunakan saya tertarik untuk mencobanya?terima kasih

  • @dinuvasar6071
    @dinuvasar6071 ปีที่แล้ว

    Cit ar costa un generator din filmare

  • @hossamhassan1310
    @hossamhassan1310 ปีที่แล้ว

    Amp ?

    • @Inventive101
      @Inventive101  ปีที่แล้ว +1

      I did two tests, I showed exactly the amperes consumed for both tests

  • @davidtbilisski229
    @davidtbilisski229 2 ปีที่แล้ว +1

    I dont believe that this gas flow can give 40% fuel economy

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว +1

      I didn't believe it either

  • @nicolaerusu7193
    @nicolaerusu7193 2 ปีที่แล้ว +1

    Le comercializezi?ma interezeaza.

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      Salut, nu fac pentru vânzare

  • @chutumurmu5129
    @chutumurmu5129 2 ปีที่แล้ว +1

    Do you sell this machine? Do you have any website link or contact number?

    • @Inventive101
      @Inventive101  2 ปีที่แล้ว

      No, I don't sell, my contact is usually youtube