Three phase Rooftop Solar Hybrid system
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- This is a rooftop solar hybrid system in 3 phase format.
All the loads of the house is connected to the solar system. System generates roughly 40 units a day on an average.
A hybrid solar power system is a combination of Grid connected system and off grid system. The working of the system is Explained below ;
1. During Sunshine hours, the loads are run by the solar energy generated.
2. In case the solar energy generated is more what is required by the loads, the excess energy charges the batteries. If there is still excess energy, the same can be exported to the power utility grid. However grid is mandatory for the export of energy. But for running the loads and for charging the batteries, grid is not required.
3. In case the solar energy generated is not sufficient to run the loads, the differential energy can be either drawn from the grid or the batteries (This is programmable). That is if grid is available, it can be drawn from grid or it can be drawn from the battery if grid is not available. Or it can be programmed to take 10% from battery and remaining from grid. Or in other words, This is a very versatile system and highly configurable.
3. In the non sunshine hours as well, it can be programmed to draw the energy either from the grid or the battery.
4. Say during the non sun-shine hours, if grid is not available, the entire energy is drawn from the Batteries.
5. As explained earlier, Excess energy can be traded with power utility company (Grid). At the end of the billing cycle, if You have given more energy to the grid, the utility company pays you at the prevailing tariff. If you have brought energy from the grid, the power utility company bills you at the prevailing tariff.
For more information visit www.hinren.com
Hi sir myself ManjuNath from Panasonic lithium ion battery division
I have worked with Studer team in Chennai for Gislen software video and explanation are impressive
Very good video. I am thinking about setting up solar on a new barn to run some 3 phase equipment. Your presentation was very helpful.
Glad it was helpful!
Nice video with our products! Really well explained
I am already use IS1248 studer is very good result I like studer only
Impressive, this will help me in the farm, how much did it cost ?! And did it payed off??
What is the total cost involved sir , can u tell me ?
Good sir inqari solair sistam
Hello sir. I am hoping you can answer a unique question for me. I have the XTM 8000 - 48 volt unit. it was configured for 120 Vac 60 Hz out to consumer. can I configure the AC in battery charging system for 120 Vac 60 Hz 30 amps generator to charge my battery's???If so, how would I do that?
Why 3 inverters sir ?
👍
Sir what is the cost of this syster
Total price please
Sir .iam from pakistan I need studer inverter .how I buy to you
Good afternoon Sir, how are you doing, my Joshua from Nigeria, I have an Hotel to be Power with solar system, this is my load:
19 No's of AC that is
Air condition
1 No's of 2.5HP air condition
3 No's of 2HP
15 No's of 1.5Hp
15 No's of Refrigerator 90L hotel size, and 2 No's of freezers for the kitchen.
22 No's of LED TV
CCTV camera
Lighting point.
Please can Power this load.
lighting point
Thank you.
What I do
Can you explain tamil mode?
Video Hindi banavo