how to make motion detector at home(HC-SR501 PIR Motion Sensor)
ฝัง
- เผยแพร่เมื่อ 19 ก.ย. 2021
- hello creative people!
Today I made a simple motion detector without using coding. You can use this device to notify the thief when he comes home :) .This device is made with HC-SR501 motion sensor. I also used a 5 volt relay. Of course, this device can also be made with Arduino. And with Arduino, many settings can be defined for it.
circuit diagram : bit.ly/3wlKjKk
I hope you can see more videos by subscribing to me:)
🔻items i used in video:
✔️HC-SR501 PIR Motion Sensor
✔️5v relay
✔️5v buzzer
✔️5v dc adapter
. - วิทยาศาสตร์และเทคโนโลยี
tnx for watching❤️
subscribe if you like
Pir sensor outputs 3.3v and relay needs 5v. How does the relay operate with 3.3v current from the PIR?
The input voltage of the relay module is from 3.3 to 5 volts
That Good...!!!
Is the relay module connected directly to the sensor?
yes
இதுக்கு Ardiuno board venuma
I try same thing with your job,
But relay switch keep connected when Pir not detected motion anymore,
What im mised?
Make sure that the model of the pir module is the same and the sensitivity of the relay is set to the correct level, of course, if it is adjustable
Thanku very much
good work bro
Many many thanks
Nich video bhai ❤️
Thanks for the comment❤️❤️
please can i get a circuit diagram of it?
I'll put the link in description
Powered at 5v what voltage does it output?
There is no output and the relay passes any voltage
Is good for 220v lamp..👍
i like that👌👌
i like you comment too
good luck💙💙
thanks for comment
Sir, at 0:17, what is the blue thing?
Wire terminal
Bruh mine is same relay light red and green are on but but not detecting any thing countinously my light is working what should i do its a new sensor
You should probably adjust the sensitivity of the sensor
It seems practical👍👍
yes buddy
Trust me that buzzer is more higher pitched than you think.
please share circuit diagram too
I'll put the link in describtion
What are all the wires?
Beard board wire
Do you mind show the circuit ?
I'll put the link in description
@@creativeA I still dont see the diagram
لا اعلم يتعذر التعليق .
Tnx for comment ❤️
Can you share the code please🙏
Description
Cool, but range of the pir is very less
First you have to show your circuit diagram.
Link is in description
Awesome 👍
Useless because this range is too short.
This is a ready motion detector..
Not DIY
I hope that helps you🤍
Kam hi nahi kar raha fake hai
100% fake.
you can try!