Hey I think I’m having the same problem with my srt4 I have replaced the tps and my check engine is still on it doesn’t have a bad idle or anything like that other than in first and second gear it doesn’t want to accelerate that fast it stops going when I’m on the gas and just reeves what was the test with the wires you used called
Pin 3 on my tps is not getting 5v I followed the orange cable and it Leeds too crank sensor replaced that and it’s still not getting 5v at pin 3 at tps
Nice I know what to replace now 👍 thanks
Brother I’m need a little help I’m getting perfect voltage for testing the ground but when I do the positive I’m getting a lower reading
Hey I think I’m having the same problem with my srt4 I have replaced the tps and my check engine is still on it doesn’t have a bad idle or anything like that other than in first and second gear it doesn’t want to accelerate that fast it stops going when I’m on the gas and just reeves what was the test with the wires you used called
Test tps plug
What were the symptoms? My srt is idling so bad (like big cams), if I disconnect the tps it idles better
I would start by replacing the TPS
Pin 3 on my tps is not getting 5v I followed the orange cable and it Leeds too crank sensor replaced that and it’s still not getting 5v at pin 3 at tps
Check if there’s any tears or corrosion on the wire if you can check with a needle adapter, check the wire throughout