NOTES: You don't have to change anything you've done previously. If you set up DLSS4 from the last few videos, just update DLSS Swapper, no need to undo anything you've previously done. Also, when I first updated yesterday it didn't show any of my games. I closed DLSS Swapper, re-opened it and they were there. Just FYI.
Thanks for your timely updates. I’ll wait until end of week and then give it a try, I’m not nearly as proficient at file management as I should be. Your how to videos have been tremendous!
Discovered this update yesterday after I had watched your other vid on DLSS 4, then the swapper udpated and hey presto, no need to faff about hunting all the other files. Thanks for the videos and great that you have done this quick one here to help everyone out.
Thanks so much for keeping on top of this.... I did change as per your last video not this one.... And the improvements are substantial. I'm on an 8 gig 3060 ti.
Thank you for the work you put in to make us fellow simmers life easier! I guess as Framgen needs the game to run at DX12, I’ll skip fiddling around with it again because my 2070S is on the lower side of VRAM and I hit the limitations too quick. Pretty happy with what Lossless Scaling has done though. I wonder what DLSS needs to be set at in sim? Quality? I had I at DLAA for some time now because it gave me the best overall aesthetics.
I got my sim finally tuned for 50fps after weeks of trying and fiddling thank you for helping make it not look like a smeared wet pacasso painting anymore
By far the easiest way to find where a certain file is located is by using an app that will index everything on your drive and open the folder where it's located when you say so. I use Listary (double press Ctrl and off you go), but Everyting is great, too. They are all free. Make yourself life easier.👍💪
Question.. Is all this editing coming if we just wait one week and install the driver? I'm a little confused if we need to do this stuff if we just have to wait a week?
So the new version of swapper can change dlssg as well apparently but didn’t you say something about having to change the NVIDIA profile inspector the other day. Something about a “J” having to be enabled??? Is that necessary now with this new swapper?
I´m using the dlssg-to-fsr3 stuff to activate dlss into a 2080 gpu as you said in a earlier video (settings everything to E, etc) and works well. I should just update the DLSS swap and upgrade both, the DSLL and DSLLG and I´m good to go?
It's a bit confusing how they have named things. Frame gen is actually a part of the DLSS technology, so essentially if you are using frame generation you are using DLSS. So the short answer to your question is that I would update both the DLSS and DLSSG (frame gen) files.
Hey, thanks for the reply . So it's this file, what you are taking about in the vid correct : th-cam.com/video/ZAEGIKskmHU/w-d-xo.htmlsi=XxXe22Wsn1YMjD_o because after that video I updated the file with G in it... and that's the frame gen dlss file, right? So if I only use frame gen, I should update both ?
After installing DLSS4 Frame Gen stopped working in MSFS 2020 but works in MSFS 2024. Carefully followed all instructions. The Nvidia Frame Gen option disappeared in Graphic settings.
To add to this, I reverted back to DLSS 3.71, reinstalled nvd.dlssg from July and ran the Regedit Tool, and got Frame Gen working again. I will wait until Thursday to try DLSS 4 again.
Not sure now why I have two MSFS2024 installed. One on G drive where X box Pass installed it, as requested and one on C drive where I don’t want it. I only found this as the DLSS Swapper defaults to the C drive and I couldn’t change it to G drive. What an App this sim is turning out to be…
the new NVidia update today robbed me of my 2070 frame gen and all of my performance :(( RIP. In order to get my frame gen working, had to uninstall Nvidia App. RIP. One day i'll just have to upgrade my GPU. Im gonna miss Nvidia app, but it disabled my frame gen.
@@IslandSimPilot oh well have uninstalled reinstalled still no games showing up. Was nice while it lasted read in the notes that its a known problem with this version.
Not sure now why I have two MSFS2024 installed. One on G drive where X box Pass installed it, as requested and one on C drive where I don’t want it. I only found this as the DLSS Swapper defaults to the C drive and I couldn’t change it to G drive. What an App this sim is turning out to be…
NOTES: You don't have to change anything you've done previously. If you set up DLSS4 from the last few videos, just update DLSS Swapper, no need to undo anything you've previously done.
Also, when I first updated yesterday it didn't show any of my games. I closed DLSS Swapper, re-opened it and they were there. Just FYI.
Thanks for your timely updates. I’ll wait until end of week and then give it a try, I’m not nearly as proficient at file management as I should be. Your how to videos have been tremendous!
Thanks so much! And it’s never wrong to play it safe.
Discovered this update yesterday after I had watched your other vid on DLSS 4, then the swapper udpated and hey presto, no need to faff about hunting all the other files. Thanks for the videos and great that you have done this quick one here to help everyone out.
I so appricate your videos. From a glider pilot who enjoys simimg in MSFS during the winter months and use XCSoar for training!
I took my first glider instructional flight at 12. Love gliding!
Trying this later in the week. Been away for a few days. Btw... never realized you had a members only area. Subbed 😀
Hey Luis, I saw that, thanks so much for the support my friend! Really appreciate you.
More than impressed with your videos and information as you are used to be hearing from me now! 🤣 Thank you, as always, sir!
And thank you, sir!
Nothing wrong with the "quality" of the video ...😮
Short and sweet and to the point ..perfect 👍😊
Thanks for the quick update!
Thanks so much for keeping on top of this.... I did change as per your last video not this one.... And the improvements are substantial. I'm on an 8 gig 3060 ti.
Did you get Frame Generation working? I have 3080ti too and i cant get it working :(
well well well less then a minute is quite nice!
We aim for a moderate amount of competence here on the ISP channel! 😂
@@IslandSimPilot😂👍
@@IslandSimPilot 👀😂
Awesome - thanks for the video.
Thank you for the work you put in to make us fellow simmers life easier!
I guess as Framgen needs the game to run at DX12, I’ll skip fiddling around with it again because my 2070S is on the lower side of VRAM and I hit the limitations too quick. Pretty happy with what Lossless Scaling has done though.
I wonder what DLSS needs to be set at in sim? Quality? I had I at DLAA for some time now because it gave me the best overall aesthetics.
I got my sim finally tuned for 50fps after weeks of trying and fiddling thank you for helping make it not look like a smeared wet pacasso painting anymore
By far the easiest way to find where a certain file is located is by using an app that will index everything on your drive and open the folder where it's located when you say so. I use Listary (double press Ctrl and off you go), but Everyting is great, too. They are all free. Make yourself life easier.👍💪
Thanks for sharing! Will check those out.
Great video! So you still have to install the CUDA driver, right? What about the "J" thing in nvidia inspector?
thank you for this new short but important video. To update dlls swapper 1.1.1 we have to remove the previous versione before to lunch the exe file?
Nope! Just run the installer.
Thank you for the update!
Question..
Is all this editing coming if we just wait one week and install the driver?
I'm a little confused if we need to do this stuff if we just have to wait a week?
That because there are lot of impatient people in the world. They eant the good stuff yesterday. :-)
Thanks for the guerilla-style video. Informative as always!!😂
So the new version of swapper can change dlssg as well apparently but didn’t you say something about having to change the NVIDIA profile inspector the other day. Something about a “J” having to be enabled??? Is that necessary now with this new swapper?
So my games don’t pop up on the dlss swapper what do I do then
sorry your not using AMD however these instructions are always good thank you
Hey man, great video as always! Quick question: is it better to update the NVIDIA driver with the DDU utility? Or is the NVIDIA app good enough?
DDU is never a bad idea. I just downloaded and updated this one (571.96) and haven’t had any issues.
I´m using the dlssg-to-fsr3 stuff to activate dlss into a 2080 gpu as you said in a earlier video (settings everything to E, etc) and works well.
I should just update the DLSS swap and upgrade both, the DSLL and DSLLG and I´m good to go?
I click update and download but it does not appear to change the versions on the game files?
It is now (as at time of writing) v1.1.2
In order to update to this version, do we have to undo all the actions from the yesterdays update or just do nothing, only updating?
Nope! Don't have to change anything you've done previously, just a straight program update.
@@IslandSimPilot Great! Thanks alot!!
With DLSS 4.0 and DLAA the trees are looking awful in distance. I´m not really happy with DLSS 4
DLSS swapper is not finding MSFS. Under DLSS and DLSS Frame Generation, it says not found. Any guidance?
Are you on the latest v1.1.2? I updated the link in the description. It was having that issue on v1.1.1.
Even with this update I don't see Frame Gen option in MSFS 20/24. 3080ti
Hello. Is the DLSS frame generation the one, for cards who use frame gen, but without DLSS?
It's a bit confusing how they have named things. Frame gen is actually a part of the DLSS technology, so essentially if you are using frame generation you are using DLSS. So the short answer to your question is that I would update both the DLSS and DLSSG (frame gen) files.
Hey, thanks for the reply . So it's this file, what you are taking about in the vid correct : th-cam.com/video/ZAEGIKskmHU/w-d-xo.htmlsi=XxXe22Wsn1YMjD_o because after that video I updated the file with G in it... and that's the frame gen dlss file, right?
So if I only use frame gen, I should update both ?
a fail fast exception occurred, does anyone knows how to fix it and run the app?
So no need to change image scaling from 1.0000 to 2.000?
I haven’t tried that yet with DLSS4 but I hope to today.
v1.1.2 is now released so you may want to update your download link.
Thanks!!!
If I’m using the frame gen mod with my 3080, would I still need to install the DLSS-G file?
Yep!
where are the promised links?? Especially for the xml file
Hey, look here:
m.th-cam.com/video/eyFd5oUKDPo/w-d-xo.html
so if i understand it right. With this addon I can update MSFS2024 fsr to FSR3.1?
I do believe so, though I do not have an AMD card so I can't confirm.
After installing DLSS4 Frame Gen stopped working in MSFS 2020 but works in MSFS 2024. Carefully followed all instructions. The Nvidia Frame Gen option disappeared in Graphic settings.
To add to this, I reverted back to DLSS 3.71, reinstalled nvd.dlssg from July and ran the Regedit Tool, and got Frame Gen working again. I will wait until Thursday to try DLSS 4 again.
Not sure now why I have two MSFS2024 installed. One on G drive where X box Pass installed it, as requested and one on C drive where I don’t want it. I only found this as the DLSS Swapper defaults to the C drive and I couldn’t change it to G drive. What an App this sim is turning out to be…
I tried dlss4 with Nvidia profile inspector ,but I'm still have blur in display and overall in scenery..
Have it around 3 inches past the wing trailing ege if u look hard but i can deal with that as i fly cockpit views
Can we expect AMD to release official Frame Generation? The mod produces lot of artifacts and ghosting 😢
the new NVidia update today robbed me of my 2070 frame gen and all of my performance :(( RIP.
In order to get my frame gen working, had to uninstall Nvidia App. RIP. One day i'll just have to upgrade my GPU. Im gonna miss Nvidia app, but it disabled my frame gen.
I updated this and now it does not see any of my games.
Happened to me as well, close it out and restart it.
@@IslandSimPilot oh well have uninstalled reinstalled still no games showing up. Was nice while it lasted read in the notes that its a known problem with this version.
@@IslandSimPilot Had the same issue, close it out and restart worked for me 👍
@@Paul-cj5wg Got it working thanks guys.
Not sure now why I have two MSFS2024 installed. One on G drive where X box Pass installed it, as requested and one on C drive where I don’t want it. I only found this as the DLSS Swapper defaults to the C drive and I couldn’t change it to G drive. What an App this sim is turning out to be…
This update is a “game” changer