harbor freight heavy duty chain breaker
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- In this video I show you how to break a chain with the chain breaker.
If you would like to purchase a chain breaker here is a link below.
Chain Breakeramzn.to/2Zo4YJN
As an Amazon Associate, I earn a small commission from qualifying purchases.
This will not, however, change the price of any product you purchase.
This helps support the channel and allows me to continue to make videos.
Thank you for the support!
Keep it real & clean.
Help Support My Channel paypal.me/kevi... Thank You.
Fan Mail kevinrobinson6688 P.O.Box 123 Bobtown,PA 15315-0123
I just bought this today and used it on a #41 chain. That poker pin fits but its super tight. You need to put a wrench between the big bolt and the chain to back it out of the chain.
Thanks my friend.
When you are screwing the larger bolt into the chain, make sure it's flush with the chain, and then screw the pin in. This will stabilize and center the punch pin
Thanks for sharing.
in some cases do NOT push pin all the way out! leave it hanging on the last edge of that figure 8 plate..other wise very hard to line upand start pin in hole if u need.... go slowly
Thanks for the info.
Thanks, just bought one today with my 30% off coupon. However, I have noticed that one pin has a flat tip and the other tip is beveled.
Good tool works great thanks for the comment.
Thank you Mr. Robinson, my grandbabies have go karts and I find myself putting the chain back on quite often this time the chain broke.This is a excellent video! For do it yourselfers
That's one old school oil can dispenser for sure! I remember using my dads when i was a boy, trigger to dispense. I'm 51 now. They don't make them like they use to that's for sure!
I do like the old school tools Justin thank you for the comment.
Kevin, I particularly like your product reviews. I find them to be very helpful and nicely done!
Thank you Mark.
You look back and you say how did I used to do it when we buy all these harbor freight tools now great video thank you
Thanks for the comment and watching
I’ve went through two of em so far Bc the chain gets stuck in the pin pusher. I’m about to go buy one now to break some chain hope this one’s better working
Oh man that stinks hopefullyy the next one works better for you.
So it doesn't put the chain back together....rivet style
You just use a master link to put it back together.
I love all the ads, good stuff you tube!!! Keep the ads coming, awesome!!!
I want one..dont see many bikes with 420 chain...lol..good show Kevin
Cheap and easy to use thanks Nate.
Great video man! This will help me take a link out of my daughters dirt bike chain 🤗
Thank you for watching glad to help.
will this break a chainsaw chain or to big of a pin? ty
I'm not sure on that one sorry.
My breaker pin is stuck in the chain any advice I’ve tried everything. I can’t cut it because it’s at the length I need it
Oh man i don't know, maybe try using a punch, sorry good luck.
We always looked for the master link on the chain and took it apart from there but that would work. Thank you for sharing!
This tool is used just to cut the chain to make it shorter you would have a master link to Paul.
Great review. Thank you!
Thanks for watching.
Great video! Keep up the good work.
Thank you.
Does he work for the motorized bicycle engine kit chain kits ?
I remember having to grind them I used a small nail to push them out. Lol
That's right me to William.
Good video helped me plenty thank you!
Glad it helped!
Very good video as always Kevin,
i enjoyed this video very much!
Thank you Julian for watching and for the comment.
Thanks for sharing. Great tutorial.
Glad you liked it thanks for the comment Roger.
Now that’s pretty slick
For sure Jerry.
Did you by any chance to a video on putting the chain back together? I'm in a bit of a pickle right now and that information be very helpful.
Use a master link
Should still grind it a little bit, it will be easier on the breaker. I broke a motion pro chain breaker once because i went the lazy way (530 chain)...lol wont do that again
Thanks for the comment Loiczzr.
Do an end pin . That’s what I’m dealing with .
Sorry but i'm not sure what you mean could you explain a little better.
does it work for reassemble ??
probably not Bill
Yes, just turn it around
Would it be possible to grind some wideness to use on bicycles...?
Good Question ! If you get the Answer Hey can your let me know !
🙏🏽🙏🏽
Thanks for the comment and watching.
Will it work on #35
Yes i think it will.
Love your accent.. PA? NC?
Thanks for the comment.
Will it cut double chain
Not sure on that one Kenny.
Will it cut a 10 or a 40 chain
Not sure.
Will it work on 41 chain?
Can Let me know if Work?
I got a motorized bicycle kit will it work on that chain ?
These used to come with a riveter in the box 😔
cool that would be nice.
@@Robinson-Homestead I actually used the bearing to rivet. Worked out OK. But I had to use an "anvil" part from another chain tool kit to only put pressure on the stem that has to be riveted and not on the plate. The other kit cost 10 bucks on Amazon. But it broke lol
does it rivet tho
Not sure.
Sure beats a grinder and a punch eh. Having dedicated tools is always better than not eh. I have 3 of these that go from saw chain to 120.
You do a lot of chains?
👍🎥😎
Thank you M Ten.
The pin was supposed to be 1/8" but they were 5/32" and didn't work
alot of people was complaining about that problem.
👍 😎 👊
Thanks for the comment Jamey.
Me coming to this video seeing how to get it out of a bike chain😐
Your missing a spring that goes in there with the ball bearing
Thanks for the info.