Try pulling out but not all the way. The pipes seal using some orings inside the box. You may try to remove the pipe completely by pushing the out metal ring with a flat screwdriver and then pulling out the pipe. Inspect it anc there after insert it back by pushing it all the way in and lastly pull it outwards. If it doesn't seal then it will need the orings replaced. That will be a challenging and slightly technical job
Hello, buddy, Can you tell me when you replaced the valve block whether your fault was cleared, and whether all the electronics related to the air suspension work perfectly, whether your airbags inflate. I have the same problem on my range rover p38,so i dont know that to do.Wish you all luck!
Hey, Issue resolved. It was a leaky airline. Went and replaced it and she works like a charm. You have to make your own EAS cable, cost you like $15 to get the serial adapter and usb. Let me know if you need the links i got it able to reset using a free software online made by RSW Solutions
@@isaiguevara2871 Hi . . . I have EXACTLY the same fault. All four yellow lights come on and blink . . .. but if I wait a while the car WILL go up on air system, but . . . . all four lights STAY ON!!!!!
I had my 1995 land rover 4.00 SE, sit for 3 years, just decided to drive it now, went 25 miles and air suspension flualt light comes on and the car starts to bounce ever time I run over a bump. It seems like the compressor is not getting power to it, check all the fuses and relays an they are good, (I disconnected the wires to compressor and provide power directly to it and it works)
Did you ever figure out what the problem was? I'm having the same issue with my Range.
Try pulling out but not all the way.
The pipes seal using some orings inside the box.
You may try to remove the pipe completely by pushing the out metal ring with a flat screwdriver and then pulling out the pipe. Inspect it anc there after insert it back by pushing it all the way in and lastly pull it outwards. If it doesn't seal then it will need the orings replaced. That will be a challenging and slightly technical job
I just saw your video, any advise as to why the compressor would not engage automatically. I have the same issue. Thanks
Looks like you need an eas buddy box.
Hello, buddy,
Can you tell me when you replaced the valve block whether your fault was cleared, and whether all the electronics related to the air suspension work perfectly, whether your airbags inflate.
I have the same problem on my range rover p38,so i dont know that to do.Wish you all luck!
Hey, Issue resolved. It was a leaky airline. Went and replaced it and she works like a charm. You have to make your own EAS cable, cost you like $15 to get the serial adapter and usb. Let me know if you need the links i got it able to reset using a free software online made by RSW Solutions
@@isaiguevara2871 Hi . . . I have EXACTLY the same fault. All four yellow lights come on and blink . . .. but if I wait a while the car WILL go up on air system, but . . . . all four lights STAY ON!!!!!
SO HOW DID YOU FIND THE LEAK ???
Hey man , having same issue , could you send me those links for that software to reset this . Thank you
@@isaiguevara2871can you give me the information I have the same issues
I had my 1995 land rover 4.00 SE, sit for 3 years, just decided to drive it now, went 25 miles and air suspension flualt light comes on and the car starts to bounce ever time I run over a bump. It seems like the compressor is not getting power to it, check all the fuses and relays an they are good, (I disconnected the wires to compressor and provide power directly to it and it works)
it seems a quick solution....however....can you tell me if it is possible for you how to do that.....thanks
Kinda late, but I bought a program for the was to read and clear the faults
What program did you buy and did it work?