I blocked my rear abs off but still have my front. Capped it at the abs module and then ran a non abs line from master to caliper and left wheel speed sensors in. No fault codes, cruise still works, no dash lights on and cheap yet effective. Way better then just unplugging it constantly
*Excellent* advice about leaving stuff loose until you have all the bolts started. It saves so much time. I like those risers too, my stock nightster has me leaning too far forward, and my 44 year old back doesn't like it. EDIT: I love the nightster videos, I learn something about my bike every single time you upload one.
Deanspeed did make brake lines in different lengths for the Nightster a while back. Harley also makes longer brake line I believe along with cable extensions because they sell the mini apes for the Nightster.
We did 12in apes on a 23 Nightster her at the dealer, Cowboy Harley Austin. Looking forward to see in you in December. Barnett does the clutch cable, HD makes the brake line.
@@kruesioriginals I just installed all these from Harley. Here’s all the part numbers and prices 1. 41800936 - extended brake line ($105) 2. 37200611 - extended clutch line ($105) 3. 69202862 - extended wire harness ($30)
Modern exploration I tell yea!? Thought that was a tank for sure 🤣 looks like a damn computer? Thanks for shinning light on HD’s modern direction. Extremely interesting to watch. The power they’re getting out of that model is sick!? Every bikes a good candidate for ABS delete 🤣 Thanks
I had a sporster s I threw protapper pillow grips on I just bought the extra grips from Harley with the tubes cut the rubber off the new ones threw hairspray on the pillow grips and slipped them on the tubes torqued them back on so it works with the throttle to!
Risers. Risers. Risers. It's always risers. Then Brian wants to raise the seat to match up to the handlebars. Then on to the multi-lens headlight. Obviously, my sense of style gravitates to your bagger racing bike (without the bags).
Not that it's exactly local to you, but if Galfer doesn't make brake lines for your bike and you let them use your bike to take measurements and everything, they will give you a set for free. They used my wife's bike to make the sets for kawasaki vulcan s with abs.
Hey couldn’t you have used longer Pam America lines? Really cool build. I tried the Nighster at European Bike Week and I kind of want it. Little hooligan machine
You will probably never see me build one of those out of here. You can Stunt Ride them. they’re just underpowered for drifting and stuff, but you still can do it. It can be done. I’m just not a fan of the old stuff for myself.
if you guys are making trees for the nightster why not include or sell like a billet reducer to take the riser holes down from standard harley riser bolts to the stock nightster size?
19:57 I have already installed the Shark Demon headlight after watching your custom Nightster build. What size Archetype risers did you install and will you have the gauge relocation kit for sale on your website soon? I can’t wait to rip my Nightster with the American Suspension Shocks. Arnott also mentioned that they should be possibly coming out with an air suspension kit for the Nightster in the spring.
I have a 2023 nightster special with 1800 miles I'm in Texas title will be here in the next week or 2 and I'll be asking 11k obo If you can't find a good deal
1:15 I smashed my '22 Nightster into a Honda driven by an idiot, and the tall gauge was NOT a good thing to have when a man goes over the bars at 35 MPH. I smashed my right testicle on the gauge when I went over. There was security camera footage that I posted on my YT page. Check it out. I like the new, less-masculine version.
Ask cool guy Sandoval about that one time he gifted a really nice bike to some lame ass youtuber when he could have gave it to someone who actually needed it and deserved it. I asked him but he gave me some lame ass kamala “thats your opinion, stop projecting, youre full of hate” answer
@. I guess what im trying to say is, if you had a chance to give away a bike, total loss to you, would you give one to a youtuber knowing that at the very least youll gain more traction on your channel … or would you give it someone in need who probably will give you nothing in return. It was more about the traction they would both gain than an actual video from than the gift. Theres a whole world of people out there who have nothing, but youtubers seem to only do things for others when it benifits them. Capitalism, punk rock as fuck.
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
I blocked my rear abs off but still have my front. Capped it at the abs module and then ran a non abs line from master to caliper and left wheel speed sensors in. No fault codes, cruise still works, no dash lights on and cheap yet effective. Way better then just unplugging it constantly
That would be a good way. It would be nice to have front ABS for rollers.
Harley makes a longer front brake line for taller bars.
*Excellent* advice about leaving stuff loose until you have all the bolts started. It saves so much time. I like those risers too, my stock nightster has me leaning too far forward, and my 44 year old back doesn't like it.
EDIT: I love the nightster videos, I learn something about my bike every single time you upload one.
Hell yes glad we could help
www.kruesioriginals.com/products/archetype-signature-adjustable-riser?_pos=1&_sid=fae31363b&_ss=r
Making nightster great again, looking good Ryan 👍🇺🇸✌️
Thanks 👍
I know how stupid this is but “what in the French horn?” Makes me laugh every time 😅
Deanspeed did make brake lines in different lengths for the Nightster a while back.
Harley also makes longer brake line I believe along with cable extensions because they sell the mini apes for the Nightster.
We did 12in apes on a 23 Nightster her at the dealer, Cowboy Harley Austin. Looking forward to see in you in December. Barnett does the clutch cable, HD makes the brake line.
What about extending the wiring? How did you do that?
@@kruesioriginals
I just installed all these from Harley. Here’s all the part numbers and prices
1. 41800936 - extended brake line ($105)
2. 37200611 - extended clutch line ($105)
3. 69202862 - extended wire harness ($30)
You could just make the riser holes in the trees drilled for the big bolt and supply a sleeve to throw in for the smaller bolts.
I was thinking the same thing
Very cool.i liked the gold bars.
Im so stoked for the biker build off! 2 of the greatest bike builders ever. Blockhead is a legend!
Modern exploration I tell yea!? Thought that was a tank for sure 🤣 looks like a damn computer? Thanks for shinning light on HD’s modern direction. Extremely interesting to watch. The power they’re getting out of that model is sick!? Every bikes a good candidate for ABS delete 🤣 Thanks
😅 You guys are clearly the most book-smart Harley stunting 😎 nuts out there 🏁
I had a sporster s I threw protapper pillow grips on I just bought the extra grips from Harley with the tubes cut the rubber off the new ones threw hairspray on the pillow grips and slipped them on the tubes torqued them back on so it works with the throttle to!
Great content and fun to watch!ill bing this channel when I get bored lol
Thanks man, we appreciate that!
Risers. Risers. Risers. It's always risers. Then Brian wants to raise the seat to match up to the handlebars. Then on to the multi-lens headlight. Obviously, my sense of style gravitates to your bagger racing bike (without the bags).
The gauge at the bottom reminds me of the metal nuts on trucks 😂
Can you flip the stock top to get the gauge on top? The riser clamp bolts look inline in the vid.
Not even close. We are making a new gauge clamp, which will put it on top for OEM stuff.
12mm is almost deadnuts 15/32... while 13mm is touch over half inch...
For reference 1 inch is 25.4mm
love the gold bar
Absolutely love the look of these bars. When can I get my nightster in for that upgrade?
Call the shop make an appointment. We can do it now.
I got brake lines for my 6 inch risers on my nightster from a company in AZ called dean speed that worked with my abs
I heard they since quit making them
surprised you didnt use Trask Moto V bars . I love mine
i do want a nightster ! these videos only make me want one more lol honestly !
Not that it's exactly local to you, but if Galfer doesn't make brake lines for your bike and you let them use your bike to take measurements and everything, they will give you a set for free. They used my wife's bike to make the sets for kawasaki vulcan s with abs.
Hey couldn’t you have used longer Pam America lines? Really cool build. I tried the Nighster at European Bike Week and I kind of want it. Little hooligan machine
You guys are the best keep up the dope shit //love it all
That looks badass I want one
Shut The Front Door, DJT called...
Are You the new "Secretary of Drift" ????
Yep, I start in January
Not gonna lie. I wanna trade my Ducati diavel for that exact model used of course.
If you live in Florida I can help out with that.
@ south Texas
I lm building my first stunt bike, it's a 98 fxd evo. Thinking I sunk a shit ton of money into the wrong bike? Would love to see an evo build
You will probably never see me build one of those out of here. You can Stunt Ride them. they’re just underpowered for drifting and stuff, but you still can do it. It can be done. I’m just not a fan of the old stuff for myself.
@kruesioriginals woukd make really cool build series, kinda like the stunt tail. What's it take to get an evo to stunt?
if you guys are making trees for the nightster why not include or sell like a billet reducer to take the riser holes down from standard harley riser bolts to the stock nightster size?
19:57 I have already installed the Shark Demon headlight after watching your custom Nightster build. What size Archetype risers did you install and will you have the gauge relocation kit for sale on your website soon? I can’t wait to rip my Nightster with the American Suspension Shocks. Arnott also mentioned that they should be possibly coming out with an air suspension kit for the Nightster in the spring.
I'm looking for a 1" to 22 mm handlebar. Can we arrange it to ship that to Italy?
Does the nightster have a standard harley clutch cable end on the Lever? Be a pretty easy way to go 7/8 controls without a custom clutch cable.
Nightster is the way to go might have to be my next bike
2024 drifter across champ
Just placed my order to try and win the stunt tail!
Make a drill guide for the risers kit
GALPHER makes brake lines .
Lot of work to make this a desirable bike.
❤
I have a 2023 nightster special with 1800 miles I'm in Texas title will be here in the next week or 2 and I'll be asking 11k obo If you can't find a good deal
I think two brothers has brake lines
Letssss gooooo
Secretary of keeping it hard
1:15 I smashed my '22 Nightster into a Honda driven by an idiot, and the tall gauge was NOT a good thing to have when a man goes over the bars at 35 MPH. I smashed my right testicle on the gauge when I went over. There was security camera footage that I posted on my YT page. Check it out. I like the new, less-masculine version.
By the way, I might lose my right nut. To hell with the masculine gauge!
Having one ball tends to do that!🤣
Damn that bike is looking fcking clean and mean
I will be glad when Nightster production is moved to China.
In high-school, going hogging was going out looking for fat chicks lol.
I mean to be fair, a grade 8 report card with all passing grades in Canada is equivalent to a college degree in America 😂
Firsttt
Ask cool guy Sandoval about that one time he gifted a really nice bike to some lame ass youtuber when he could have gave it to someone who actually needed it and deserved it. I asked him but he gave me some lame ass kamala “thats your opinion, stop projecting, youre full of hate” answer
What makes you think that TH-camr wasn’t deserving of it?
@. I guess what im trying to say is, if you had a chance to give away a bike, total loss to you, would you give one to a youtuber knowing that at the very least youll gain more traction on your channel … or would you give it someone in need who probably will give you nothing in return. It was more about the traction they would both gain than an actual video from than the gift. Theres a whole world of people out there who have nothing, but youtubers seem to only do things for others when it benifits them. Capitalism, punk rock as fuck.
1 ⅛ bars ... What's the benefit? Thanks
They look better